Used Hsm V Press 610 for sale (60)

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Dedpsxcngnjfx Ab Tola Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Model: HSM V-press 1160 plus baler Press force (kN): 532 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (LxWxH) (mm): 1780x1150x2985 Power (kW): 4 kW Weight (kg): 2300 Year of manufacture: 2017-2021 Year 2018, price: 8,500 EUR Dodpfxjv Al Tie Ab Tela

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH Dledpet H Rcaofx Ab Toa

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Djdpfx Abew Az E Ts Tsla

Condition: excellent (used), Year of construction: 2006, 103 USED HSM FA 400.2 industrial shredder in very good condition. One of the narrowest models in this class of industrial shredders. In addition to paper, it also shreds plastic cards, CDs, flash drives, and floppy disks. Thanks to its robust construction, the device is characterized by high efficiency and a long service life. The material for shredding is fed from the infeed table using an electrically driven belt conveyor. Continuous operation and reverse buttons. Automatic stop when the waste container is removed or full. Automatic reverse in the event of a paper jam. The standard equipment includes a 460-liter mobile cart and a front shelf. Technical features: hardened, single-piece steel cutting rollers, an extremely powerful and energy-efficient motor designed for long, uninterrupted operation, and thermal protection. TECHNICAL DATA: Number of sheets shredded per pass (70g/m²): 130 Number of sheets shredded per pass (80g/m²): 104 Dsdow Axdmopfx Ab Tela Cutting width: 5.8 mm. Entry width (mm): 428 Motor power: 4000 Dimensions (H x L x W): 1650 x 1568 x 1157 WEIGHT (kg): 425

Condition: good (used), with stand and contraweight Dljdpfxjd Hqvvs Ab Tea Motor power 1,1 kW (900 rpm). Sanding spindle 310 x 250 mm. 2 press spindles (rub cover), diameter 30 mm. Machine measurement 505 x 350 x 655 mm. Weight 20 kg.

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Dedewrybrspfx Ab Tola Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Dodjwuk Nrepfx Ab Tsla Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, HSM roll cutting saw with dust collector and acoustic guard. TYPE: RT650/2800 Year of manufacture: 2014 Voltage 230 / 400 V - 50Hz Power 17kW Rolls diameters: 300 - 650 mm Roll widths: 1270 - 2750mm Machine dimensions LxWxH: 4690 x 2100 x 3000mm Weight: 5.5 tons Dledpfx Aot N T A Iob Toa

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 Dsdjn Hxiiopfx Ab Tsla - heating: included - cooling: included