Used Hot Melt Adhesive for sale (14,763)

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Tjdpfxexx Tmrj Af Tof Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Tsdjxzg N Eopfx Af Tjf Good working and cosmetic condition. The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: used, axle configuration: 3 axles, first registration: 12/2011, total length: 14,010 mm, total width: 2,600 mm, suspension: air, tire size: 445/45 R 19.5, wheelbase: 8,780 mm, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - Refrigeration / deep-freeze unit - Air suspension = Further Information = Axle configuration Tyre size: 445/45 R 19.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Tyre tread left: 20%; Tyre tread right: 20% Weights Unladen weight: 8,125 kg Payload: 27,875 kg Gross vehicle weight: 36,000 kg Functional Loading area height: 95 cm Reefer unit: Diesel and electric operation (10,749 operating hours diesel; 8,026 electric) Condition Damage: None Tedexy Sklepfx Af Tef Identification Registration number: OR-69-BL

Year of construction: 2009, condition: used, MADAG DP H120 Hot Stamping Machine • Year of manufacture: 2009 • Pre-owned and fully functional machine • Manufacturer: MADAG (Model DP H120) • Application: Stamping • Optional: Inspection and demonstration available upon request ___ Our General Terms and Conditions apply. The seller is not liable for typographical errors or data transmission mistakes. All information and images were provided by the owner and authorized for publication. The visual condition of the items corresponds to their age and the photos shown. The technical condition and wear of the items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty. Tsdpoxy Ra Ejfx Af Tof

Condition: excellent (used), functionality: fully functional, Eloma Backmaster EB 30 T Deck Oven Double Station TOP convection table-top oven Tedpfx Aoxxgmrof Tof for 3 baking trays with extraction hood on top stainless steel construction only with us: DGUV V3 tested 2 x 230V connections Dimensions: 600 x 700 x 1220 mm (WxDxH) Used unit with warranty & spare parts service Quality from a certified workshop & service partner! Benefit from over 35 years of experience! Options: Baking trays Water filter Base frame Maintenance contract Delivery service E-Box for enhanced safety Service package Training & commissioning Many more ovens in stock!

Condition: used, For sale are 2 hot runner control units from Günther – one with 10 zones and one 15-zone unit. Price: 10-zone unit = €1,300 Price: 15-zone unit = €1,600 Dimensions (L x W x H): 470 mm x 370 mm x 150 mm Weight: approx. 4 kg Tedpfx Aev Sml Sef Tef Plug: 32A / 400 Volt

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION Todpfx Aexx Ti Tef Tef 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, TECHNISCHE ANGABEN Anzahl Stationen: 2 Stationen für Selbstklebeetiketten Etikett: Deckel + Boden   Etikett-Breite: 30-300 mm (zu spezifizieren) Behälterformat: runde und eckige Flaschen Seitliche Gurtbänder zum fixiren der Produkte beim Etikettieren Leistung: bis ca. 4000 Fl./Std. CE Konformität: Erfüllt die CE Richtlinie Gewicht: ca. 600 KG Abmessungen: 2800(L) x 1300(B) x 2400(H) mm   YouTube Video:   Technical Details : working direction : left-right, linear capacity bph max. : 4000 labels : self adhesive labels Tedpfx Asxyt Nief Tsf number of labelling stations : 2 bottle diamater max (mm) : 120 bottle diamater min (mm) : 40 bottle height max (mm) : 330 bottle height min (mm) : 60 speed adjusment : frequence converter

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Tjdpjvx Sxdofx Af Tsf Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Tedpfxexwy Aqj Af Tjf Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station Tedpexykdqefx Af Tof • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Condition: ready for operation (used), Year of construction: 1969, HEIDELBERG HOT FOIL KSB Tjdsxygdaopfx Af Tjf

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Tjdpfx Aow Udy Nef Tof Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: used, - mit 6 Teller - mit 2 Etikettierstationen (Vorder- und Rückenetikett) für Selbstklebeetiketten Technical Details : working direction : left-right, rotative, clockwise capacity bph max. : 6000 Tedpfx Afjxyt Avo Tsf labels : self adhesive labels number of labelling stations : 2 number of bottle plates : 6 bottle diamater max (mm) : 100 bottle diamater min (mm) : 60 bottle height max (mm) : 370 bottle height min (mm) : 180 motor height adjustment : yes speed adjusment : frequence converter

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) Todpfx Ajrp Enbsf Tsf (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Todpfxjxvx Ezo Af Tjf Pressing force: 90 tons Table opening: 400 mm Heating with hot water Boiler: 20,000 kcal/h

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Tjdpfx Afswb Amij Tof Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, functionality: unexamined, mileage: 42,752 km, Year of construction: 2021, DAF LF290 18t Marvtech Hot Box (2021, '71') Test to 30 November 2025 Tsdpfjxxuvzjx Af Tjf Usage at last test 42,752km (11/2024)

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Tedpfx Aexxinfjf Tef Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: used, TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Tjdpfx Afsxytyze Tef Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website:   YouTube Video:   EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products

Condition: excellent (used), Heraeus drying cabinet hot air sterilizer Here we offer a Heraeus drying cabinet hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250 °C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: depth 339 mm, width 403 mm, height 380 mm External dimensions: Depth 535 mm, width 744 mm, height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 7.1 A, rated power 1.64 kW Type: SUT 6060 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Tsdpfog Airfsx Af Tjf

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: AN98A21604, temperature: 232 °C, I am offering for sale a Nordson hot melt adhesive system in good condition. The device has been checked for function and is fully functional. The technical data can be seen in the pictures. Tedpfx Aferq D Avj Tef

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Tailstock Todjxw R Rfjpfx Af Tef - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Condition: excellent (used), Here we offer you a DÜRR test station for adhesive heads. DÜRR test station for glue heads included (5 robot guided glue heads) DÜRR test station (self-built Dürr) for the automotive industry Weight: 1200 kg Tjdpfx Aomhftdef Tsf Type: DÜRR test station for glue heads Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 Tjdpfotq Em Tjx Af Tof - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.