Used Homag Weeke for sale (481)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Ibodeylp Slepfx Ahyjc Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Iodpfx Ajz En Axjhyebc Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2022, operating hours: 540 h, Okleiniarka wąskich płaszczyzn + + stacja XES200 Producent: HOMAG Typ: EDGETEQ S-500 KAL375 AT Rok 2022 + stacja XES200 przeznaczoną do obsługi systemu klejowego PUR zastosowanie technologii airTec Ibedpfx Ahszkmqzsyec Sterowanie: HOMAG powerControl PC23 z ekranem powerTouch Wyposażenie: agregat wstępnego frezowania, jednostka klejowa technologia airTec agregaty obcinające agregaty frezujące, agregaty zaokrąglające cykliny polerki Dodatkowe wyposażenie: stacja serwisowa HOMAG XES 200. only 540 working hours!!

Year of construction: 2002, condition: ready for operation (used), This 3-axis HOMAG CHF 51/32/32 was manufactured in 2002. It features a cutting width of 3200 x 3200 mm and a saw projection of 102 mm, ensuring efficient cutting capabilities. The machine includes three tables with an air curtain and a main motor of 11.2 kW. If you are looking to get high-quality woodworking capabilities, consider the HOMAG CHF 51/32/32 machine we have for sale. Contact us for further details. • Cutting width: 3200 x 3200 mm • Tables: 3 tables with air curtain • Saw projection: 102 mm • Cutting height: 85 mm Isdpfx Asz Sz Hfjhyobc • Main blade diameter: 400 mm • Main motor: 11.2 kW (15 HP) • Scoring saw (Incisor blade): Included, with independent motor Additional equipment • Cut-Rite software optimization

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Ibsdpfxjzr N E Ds Ahyoc Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Ibodpfx Aezr Nurehysc Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm Ibsdpoz A Tx Tefx Ahyjc HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Ibjdpfezmht Aex Ahysc

Condition: used, functionality: fully functional, Ferwood Code: RU0011460 - Manufacturer Code: 2-056-17-8772 - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG CNC - WEEKE - If interested we offer a revision service, contact us. Ibedev I A H Dspfx Ahyoc

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Ibsdpfxeyrpw Ie Ahyoc

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Iodpfx Aoyrpxxohyebc

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Ibedpfxjzuykco Ahyoc Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Ibodpfx Aszuyhhohyjc Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: good (used), Homag BMG 316 L machining center Working area: 4200 x 1550 mm 8 crossbars, each 1340 mm long 6 loading supports 8 front stops 5 rear stops in the machine base 4 side stops Suction cups: 160 x 155 h 100 mm Ibedpsz R Dm Eefx Ahyec Suction cups: 125 x 70 h 100 mm LED positioning system for workpieces and suction cups Electro-spindle, 5-axis, 10 kW, 13.5 hp, HSK F63 Liquid cooling Circular tool changer with 18 positions Drilling head with 17 vertical spindles, 7500 rpm 4 horizontal spindles with 125 mm blade, adjustable 0/90° Chip conveyor Tool transfer pick-up Collision control system CAD/CAM interface 2 Busch Mink MM 1144 BV vacuum pumps, 80 m³/h

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Iedpfxozq Ab Ns Ahysbc Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table Ijdjzznh Nspfx Ahyobc integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Isdszux Tcepfx Ahyebc Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Isdpey U Inxsfx Ahyobc Maximum working width: 2500 mm.

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine Ibjdpfx Aey S Edxshyoc 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. Iodpfx Aezzwhfehysbc - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Feed Speed 11 m/min

Condition: used, Year of construction: 2018, Panel dividing saw Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Isdszuy N Sopfx Ahyobc Main saw motor: 11 kW Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface Iodpfx Aoz H Na Ishyobc WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: used, Year of construction: 2014, Modell: Brandt Optimat KDF 430 C Production year: 2014 Feed speed: 11m/min Iodozkd Nzopfx Ahyjbc Workpiece thickness: 8-60mm. Edge thickness: 0,4-8mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Profile/Glue srapper: Yes Buffing unit: Yes

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Ibsdpfxozvmx Ae Ahyec Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, functionality: fully functional, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested we offer an overhaul service, contact us. Ibedpfxov I A Rpo Ahyec