Used Homag Kal 310 for sale (474)

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 Isdjxqh T Dopfx Adnea This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed infinitely variable from 18–24 m/min For edge material from rolls or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber coating Workpiece support – scissor-type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with two driven, angled rollers Processing units: Jointing cutter unit with 2 motors, each 3 kW Gluing unit A20 Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW Multi-stage finish sanding unit MN, automatic Isdpfx Adjw Sdlmsnoa Finish sanding unit for glue joint Buffing unit above and below with oscillation Chip conveyor belt Electronic frequency inverters for processing units HOMATIC control system with NC21 input module Good condition of the machine.

Condition: new, Complete set of safety mats for a CNC machine, new and in original packaging. Includes all components required for the safe operation of a CNC machine. Very easy to install, can be installed by a trained machine operator. Overall dimensions: 5600 mm long and 1330 mm wide. Weight approx. 350 kg. Supplied with plug-in safety mats in the following sizes: - 3 pieces 1000 x 1200 - 2 pieces 750 x 1200 - 2 pieces 500 x 1200 - 6 pieces plug-in connection cables - 1 piece transition strip for the machine - 9 pieces aluminum cover profiles - 2 pieces middle zone connecting bars in yellow - 2 pieces outer zone connecting bars in black Iedpfjv T Na Iex Adnoa - 1 piece assembly instructions Unfortunately, we ordered the incorrect safety mats, and since these are manufactured goods, we cannot exchange them. In the last picture, we have assembled the reorder; it is for your convenience only. We are happy to ship the goods; the buyer bears the shipping costs.

Condition: excellent (used), Year of construction: 1997, I sell the throughfeed drilling machine with HOMAG BST440/30/D. Year 1997 Iedpfx Adjt Nddponea Configuration: 4+4 motors from under 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 2+2 motors from top 4 pcs. material pressure from top Very good condition. Available immediately.

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Iodoxmgybjpfx Adnoa Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: good (used), Working width from 190 to 2600 mm Workpiece thickness 8 - 90 mm Working height 90.5 cm Equipment: 1. Scoring saw 1.5 kW, controlled Iedpfexrx Uuex Adnja 2. Cutter 4.5 kW, tiltable by 15 degrees 3. Milling motor 4.5 kW with electropneumatic control for plunge milling

Year of construction: 2010, condition: ready for operation (used), Main Drive Spindle motor power 15 kw Additional Equipment Gluing unit Iedpfx Adsxpywlensa Tool changer (18-fold) Boring head (30 spindles) FLEX-5 unit This HOMAG OPTIMAT BAZ222/60/K was manufactured in 2010. A robust woodworking machine featuring a main spindle of 15 KW, an 18-fold tool changer, and a 30 spindle boring head. Additional features include a 6 KW milling spindle and a FLEX-5 unit. A great opportunity to buy this HOMAG OPTIMAT BAZ222/60/K woodworking machine. Contact us for further details regarding this woodworking machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg Iedpoxrcf Dofx Adnja • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Condition: used, Year of construction: 2020, functionality: fully functional, We hereby offer this used Homag Centateq P 110 Flex CNC machining center from 2020, located in Poland. It offers a working area of 3100 x 1550 mm, providing ample space for processing large panels with accuracy and efficiency. Equipped with a powerful spindle reaching up to 7500 rpm and a reliable 2.3 kW drilling unit, this machine ensures excellent cutting, drilling, and routing performance. Built with Homag’s advanced technology, the Centateq P 110 Flex delivers flexibility, reliability, and productivity for demanding woodworking operations. Features: Iodpfexq Hpqjx Adnsa WoodWOP for graphic and dialog-based creation of CNC programs. A large library of programs for machining contours, cabinetry, countertops, and doors. With a CAD plug-in that enables the creation of CAD contours and importing CAD drawings in DXF format. WOODWOP IMPORT DXF BASIC SINGLE-SITE LICENSE. A connector for transferring drawing data from a CAD system in DXF format. Individual drawing layers are appropriately marked; this allows you to automatically generate the required processing from DXF drawings. BARCODE READING PACKAGE. Allows you to enter the production sequence by reading a 1D or 2D barcode. The 'woodScan' barcode software allows you to prepare the control for the automatic transfer of up to three barcodes from the barcode reader to the seating program; for example: program name, assignment mode, quantity. Includes a handheld wireless scanner and an industrial-grade base station (Datalogic product). A separate interface connects the barcode reader to the control. Easy graphical assignment of data read from the barcode to the machine control, provided the barcode contains all the information necessary for production.

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. Iedshw Db Ispfx Adnja HSK63 holder. Available immediately.

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Iedpfju T Tt Tsx Adnsa Lifting capacity: 250 Kg Movement system: suction cups.

Condition: good (used), Year of construction: 2008, functionality: fully functional, 4-axis machining center Homag Optimat BOF 311 venture 15 XXL New spindle Machine in excellent condition Iodpfx Asw A R D Eednja Can be inspected in department 14 Dismantling, loading and transport at buyer's expense

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Application Types Iedpexn Uwkofx Adnsa CNC Wood Machining

Condition: used, Year of construction: 2018, operating hours: 5,400 h, functionality: fully functional, machine/vehicle number: 0-250-97-8163, HOMAG DRILLTEQ V-200 Optimat BHX055 Machining Center – used – Machine purchased in December 2018 / commissioned January 2019 Processing in throughfeed mode, Ball screws on all axes, Network card for remote service support, Saw unit for grooving in X-axis, Pick-Up type tool changer, Ite Dibow Hdh Es Ia Asn Integrated control cabinet ----- Technical Data ----- Minimum workpiece length X: 200 mm, Minimum workpiece width Y: 70 mm, Minimum workpiece thickness: 8 mm, Maximum workpiece length X: 3,050 mm, Iedpfx Ajxpukgjdnja Maximum workpiece width Y: 850 mm, Maximum workpiece thickness: 56 mm, Machine control software: WOODWOP 8, Screen diagonal: 24 inches, touch screen, Main spindle motor power: 10 kW (S6), Main spindle speed: 1,250 – 24,000 rpm, Main spindle holder: HSK-F63, Drilling unit motor power: 2.3 kW, Number of vertical drilling spindles: 13 pcs, Number of double horizontal drilling spindles in X-axis: 2 pcs, Number of double horizontal drilling spindles in Y-axis: 1 pc, Saw blade diameter: 100 mm, Number of tools in changer: 4 pcs, Vector speed (X-Y): 50 m/min. Quality information: - comprehensive basic cleaning - electrical system checked - pneumatic system checked

Condition: good (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 56 mm, power: 10 kW (13.60 HP), Homag drilling and milling machine Very compact machine Commissioned 6/2/2019, first owner Always maintained by Optimat, all invoices available Barcode scanner 13 vertical drills, quick-change system (left / right) 4 horizontal drills in X direction (left / right) 2 vertical drills in Y direction (left / right) 1 groove saw 100mm in X direction 4 tool changer positions for HSK63 router 10kW Workpiece length 200mm to 3050mm Workpiece width 70mm to 850mm Workpiece thickness (8)12mm to 56mm Machine measures each workpiece on X Y and Z, so incorrect workpieces cannot be input. Woodwop control Works perfectly, can be seen in operation. Iedpfexpnkgjx Adnea Available January 2026 Selling due to purchase of V310 Tools not included 400V Can be loaded with forklift. Price 44,500 excl. VAT

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Isdjm Dqmaopfx Adnoa Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, machine/vehicle number: 005981, Max. panel width: 1200 mm Ijdpexn Nf Aefx Adnja Max. panel length: 2500 mm 90 degree transfer system: yes

Condition: excellent (used), Year of construction: 2015, Carcass clamp for pressing furniture carcasses, manufactured by the Homag-group, HOMAG AUTOMATION. With this pressing concept no prepositioning of the press elements is necessary. Vertical, horizontal pressure frames are powered electromotively and act as a self-lock via the trapezoid spindles. As crossing pressure lamellas process way to the inserted workpieces and ensure an all-over coating pressure construction on the carcass parts. Features • All-over coating pressing • Pressing surfaces with tolerance balance • Pressing speed: 25 mm/s • Pressing power: 15 kn • Carcass length: 250 - 2.500 [mm] Iodpfx Aexpfnisdnoa • Carcass depth: 250 - 700 [mm] • Carcass height: 150 - 1.400 [mm]

Year of construction: 2016, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Iodpfxoxn Uwwo Adnsa Application Types CNC Wood Machining

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 105,000 EURO!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase a NEW, premium panel saw—HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage integration. The SAWTEQ B-400 is a panel saw from HOMAG equipped with automatic loading for high-speed cutting. This efficient saw is designed for handling large panel volumes and delivers superior-quality finish cuts. It is renowned for reliability, precision, high power, and rapid processing speed. The unit offered here is BRAND NEW. It was bought from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The HOMAG POLSKA Sp. z o.o. service team performed only the initial startup; the machine has never been used since. In the woodworking machinery industry, both Homag and this model are benchmarks—Homag is a global leader in modern, top-quality equipment. Our unit is exceptionally well-equipped, offering almost all available options. A similar saw in its standard version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and equipped with additional features, is valued at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput thanks to automatic loading and extended saw blade reach. - High productivity with relatively low space requirements. - Designed for efficient material flow and precise logistics. - Network-ready for digital production processes. We maintain direct contact and support from HOMAG for installation and commissioning at the buyer’s site if needed. In our view, the discount of over 45% off the new price represents an extremely competitive offer for anyone seeking a modern saw with or without future automatic storage needs—resulting in potential savings of about 90,000 EURO net (approx. 400,000 PLN net)*. The saw can be operated independently without connection to an automatic storage system. General details regarding this sales offer: - The machine is BRAND NEW, but was manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The advertised price does not include VAT (23% for Polish buyers), which will be added to the invoice—please check our listed price presentation. Iodpsw Exk Eofx Adnoa - Single owner. * Price in EUR converted at the NBP rate—1 EUR = 4.25 PLN. Welcome to all MachineSeeker users. We are new to MACHINESEEKER. We are not a furniture manufacturer, machinery trader, or production company. We are a developer with extensive property holdings in Poland, constructing homes and apartments in Warsaw. The machines we offer are our property, acquired as settlements from tenants in the furniture industry. We know their full history and confirm their condition as described. We also maintain relations with machine manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide further support. As we do not require these machines, our pricing is extremely attractive, especially considering their almost-new state. We can assist with delivery anywhere in Poland or the EU. Prospective buyers are welcome to inspect equipment before purchase. Kind regards.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Ijdpfxoktfvfj Adnea Available immediately. Ready for work, possible to test. With full manuals.

Condition: used, machine/vehicle number: 006043, Max. panel width: 1250 mm Max. panel length: 2700 mm Length of conveyor: 10500 mm Panel return for edgebander: Left Iodpfxjii Sh Ns Adnsa

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Tool taper HSK F63 Number of axis 4 Tools Max weight 6 kg Max tool length 200 mm Iedpfjxnr H Ajx Adnea This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, machine/vehicle number: 008232, Type of edging: Thin edge, Thick edge Ijdpfjxf Dtpjx Adnja Gluing System: EVA Hotmelt Premilling Unit: yes Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 5 nr

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Iedsxfhvzopfx Adnja Operating Units: 4 nr