Used Homag Edgebander for sale (488)

Condition: used, Year of construction: 2002, functionality: fully functional, Cutting size 3,200 x 3,200 mm Maximum cutting height 50 mm Main saw motor 5.5 kW Main saw blade diameter 300 mm Scoring saw motor 1.1 kW Scoring saw blade diameter 150 mm Saw carriage feed adjustable 6 - 32 m/min Program fence feed 18 m/min Lhjdsyba Shjpfx Ahvjd Number of clamping grippers: 6 pcs. Number of air cushion tables: 3 pcs. Manual angle return device for cuts 100 - 1,250 mm wide PC control based on Windows 2000

Condition: used, machine/vehicle number: 007176, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Lodpfeybaw Dsx Ahvjhd Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007575, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Ljdpfx Ahsybawwsvshd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups. Lhsdpfx Aeu T Tt Tjhved

Condition: reconditioned (used), Year of construction: 2018, operating hours: 2,214 h, functionality: fully functional, machine/vehicle number: 0-341-07-3040, BUILT-IN STANDARD FEATURES: • Saw blade projection: 60 mm • Right-hand machine • Rollers on front tables • 6 clamps – 3 double-finger and 3 single-finger • Scorer motor power: 1.1 kW • Saw carriage speed: 120 m/min • Cutting line: 3200 mm • Machine table in cutting line with air cushion • Stepless pressure beam control • Main saw motor power: 9.2 kW • Labeling software MACHINE OPERATION: • Operating panel • CADMATIC ADDITIONAL INFORMATION: • Data transfer to machine • Intelliguide basic DOCUMENTATION: • Supported languages: Polish • Format: Data carrier + printed documentation GENERAL INFORMATION: • Control: Windows 7, POWERTOUCH Ledpfx Ahsyg Narsvehd • CE mark: Yes • Availability/start-up: March/April 2026

Condition: good (used), Tax cards -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards Lhsdpfxeb A Nf Ts Ahvjd -Cabinet: only sold as a complete unit -Weight: 200 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Lhsdpfx Aoyghwcohvsd Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: used, Year of construction: 2022, operating hours: 4,522 h, total length: 80,000 mm, total width: 24,000 mm, total height: 20,000 mm, Weight: 5.000 kg Homag Sawteq B-130 Year: 2022 Serialnumber: Lhodpfx Aewu E Eushvsd Specification: 3200mm cutting width and length 65mm blade projection Program fence speed forward 25m/min Program fence speed backwards 60m/min Clamps 50, 250, 450, 1200, 2000, 2700mm 4 Manual trim stops Saw carriage speed 60m/min Main saw motor 7.5kw Scoring saw unit Intelliguide optical LED assistance 1 air table 2100 x 650mm with roller element 2 air tables 1800 x 650mm with roller elements 21.5 inch touch screen display CAD Plan 4 optimising software  - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 4522 - Main motor power [kW]: 7.5 - Control: CADmatic 5 - Software: CADPlan 4  - Saw blade bore diameter [mm]: 60 - Max. saw blade diameter [mm]: 310 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Options: Voorritser, Optimalisatieprogramma - Feed speed: - └ Max. feed speed [m/min]: 60 - Scoring unit: - └ Scorer bore diameter [mm]: 45 - └ Scorer blade diameter [mm]: 150 - Transport dimensions: 80000mm x 24000mm x 20000mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, Woodworking centre Homag PROFI BOF 411/45/PM. Used condition. Lhjdpfoydqx Rjx Ahvod

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, working width: 2,400 mm, working height: 32 mm, working length: 800 mm, TECHNICAL DETAILS Working width X-axis: 267 - 2,400 mm Working length Y-axis: 120 - 800 mm Working height Z-axis: 16 - 32 mm 2 upper drilling heads + independent Y-axis grooving consisting of: Left head with 15 vertical spindles in X and Y-axis + one blade for grooving Right head with 15 vertical spindles in X and Y-axis + one automatic hinge installation unit 2 independent lower vertical drilling heads in Y-axis each with 5 + 5 independent spindles MACHINE DETAILS Control: Numerical control with WoodWop software EQUIPMENT Automatic loading system with motorized roller conveyor Lsdpfeydn A Tex Ahvjhd Tank with vibrator for hinge storage and automatic feeding Unloading system with automatic roller conveyor

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Lhsdpfx Ahjydl Nwjvjd Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: ready for operation (used), machine/vehicle number: 0-200-03-8334, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 24 m/min, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Lhedpjydiymefx Ahvjd Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, operating hours: 29,000 h, workpiece height (max.): 40 mm, feed rate X-axis: 25 m/min, total length: 7,755 mm, controller model: PowerControl PC22, working height: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Lhsdpfsyc S Haex Ahvod Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, operating hours: 33,000 h, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, controller model: Power Control PC22, working height: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Lhsdpfxeyc Sr Ao Ahvjd Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Lhsdpfx Ahsx Swgfjvod Operating Units: 8 nr

Condition: used, machine/vehicle number: 008364, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 6550 mm Lodpfjx Swc Tjx Ahvehd Panel return for edgebander: Right

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Motors: 2 x Perske DKNS 502/2 -Power: 0.15 kW -Frequency: 200 Hz -Speed: 10400 rpm -Number: 1x milling unit available Lhsdpfxevy Tdwj Ahvod -Dimensions: 470/410/H600 mm -Weight: 60 kg

Condition: good (used), Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083016303 Ledpfx Ahecczkzovohd -Number: 2 control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.27 kg

Condition: good (used), Interface, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083016902 -Number: 3x control cards available -Price: per piece Lhsdpfocczlasx Ahvjd -Dimensions: 20/195/H265 mm -Weight: 0.23 kg

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine Lhodscc Aqmepfx Ahvjd -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015406 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.25 kg

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Ljdob Sc Stspfx Ahvehd -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Lhsdpfx Ahob Sc Svjved -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 990/620/H340 mm -Weight: 52 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -with 2 motors for cleaning from above and below -with oscillation -Swivelable - laterally adjustable -Height: adjustable Ledpfxsb Sgzde Ahvehd -Number: 1x aggregate available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm Lhedpfxeb Uhpbo Ahved -Table surface: 3240 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg

Condition: good (used), Unit carrier, clamping plate, travel table, for modular units, format processing unit, chipping unit, milling unit, profile milling unit, jointing milling unit, cross-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy guidance Ledjb Uhpcspfx Ahvjhd -laterally movable -with counter -Table height: 275 mm -Table surface: 3575 x 295 mm -Table thickness: 20 mm -Price: per piece -Quantity: 1x available -Dimensions: 3575/295/H275 mm -Weight: 356 kg