Used Hole Punch for sale (5,769)

Condition: good (used), NOVOPRESS - Punching Machine -incl. 3 punching tools -Separate hydraulics with foot switch including trolley -Length measuring system Bwedpfx Aown Tgmscyew -Protection grid Dimensions: LxWxH 1.7x1.2x1.7 meters / Weight 700kg Errors and input mistakes excepted.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm Bjdpfx Aew N N H Rscyeww throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons Bwsdpfx Acowxy Dgoyjw - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Bsdevdiduopfx Acyjww Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 working pressure.400bar with electric height adjustable supporting table Bwsdpfx Acegbk R Usyjw Machine ready for use .

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Bwjdpfjtv Hzvex Acyow Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: good (used), Year of construction: 2006, Pressing force 100 t Diameter 40 mm throat depth 760 mm Total power 8.5 kW Weight 3,600 kg Bedpfx Acoq Auatjyjww

Condition: new, Hydraulic, mobile hole punching machine model PP50 Bjdpfx Ajfdgidscyeww For punching sheet metal, flat steel and steel profiles Technical data: punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Throat 130 mm Engine power 2,2 kW Stroke rate with 20 mm stroke 25 min maximum stroke 30 mm Weight 295 kg Standard version or press version available

Condition: used, Selling various small machines from old stocks. The following machines are available: Welding machines grooving machines riveting machines Punching machines Bwsdpfx Asrn Syxecyew pumps The pictures are only a small excerpt

Condition: reconditioned (used), punching force: 100 t, sheet thickness steel (max.): 40 mm, Mubea / Muhr and Bender hole punching machine VP1000 - Hydraulic hole punch with CNC coordinate table - 5-punch tool with quick-change system and automatic punch selection - Punching force: 100 tons - Throat: 620 mm - Stroke: 60 mm - Punches up to: Ø 40 in 20 mm Ø 10 in 30 mm - Max. plate size: 1200 x 750 mm - Max. plate thickness: 40 mm - Travel speed 21 m/min Special tools and devices on request. Trade-in of used machines. Bwjdpfovl Hx Esx Acyjw Delivery possible throughout Europe.

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Bwsdpfx Acskzk Hveyjw Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: used, Year of construction: 2004, Dimensions (LxBxH): 150 x 65 x 40 cm Manufacturer : Rotex Europe Model: 3242A AL/MS Year : 2004 Type : Rectangular gyratory screener Screen: 5 mm and 30 mm Overall dimensions: 2700 mm x 900 mm Unclogging ball Composite unit : Feed hopper Dimensions: Ø 1300 mm x 700 mm Vibrating conveyor Manufacturer: Scan-Vibro Year of construction: 2005 Outlet diameter: Ø 200 mm Screw conveyor Manufacturer: Fjordvess Maskinfabrik A/S Type : B-200 Year of manufacture : 2005 Screw diameter : 200 mm Overall dimensions : 1500 mm x 650 mm x 400 mm, Bwjdpfsvlypqox Acyjw

Condition: good (used), Renz Punch 500 Perforator Bedpfjxk U Hwsx Acyjww This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 Bedpjuzv Tzjfx Acyoww guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2000, plate punches Bjdpfx Aocqxv Tocysww 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Bodoxk U Hqjpfx Acyeww Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides Bwjdpsxpvbtjfx Acyow - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Bedpfexm S Idox Acyoww Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Year of construction: 2014, condition: ready for operation (used), Movement X-Axis Movement 1200 mm Y-Axis Movement 730 mm Z-Axis Movement 650 mm Bwsdoxuk U Sepfx Acyow This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger turret punch press. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 2007, Control, make Selca, type S40-45DH, 7 axes (X/Y/Z/W/V/B), rotary table 1,000 x 800 mm, travel X/Y/Z 1,650 x 1,000 x 380 mm, W 500 mm, V 1,000 mm, B 360x0.001°, drilling diameter 6–22 mm, drilling spindle 9 kW, max. speed 4,200 rpm, milling spindle 9 kW, max. speed 2,000 rpm, 20-position tool changer, tool holder ISO40, oil mist extraction, make Sey, cooling unit, make Eurocold, type Ecological Line, chip conveyor, tool and accessory package, workbench, small workbench, tool trolley, 6 drawers, WTS rack, 4 levels, contents: setup tools, 70 tool holders SK 40, 1 lot of deep hole drills Bsdsxugydepfx Acyjww

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Bwsdpju S Ny Tsfx Acyjw Very good condition

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Bodpev Srfkjfx Acyeww Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: good (used), Year of construction: 1989, Punching machine Bodpfx Asrxrgdscyoww Manufacturer: Amada Model: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 kN Maximum sheet thickness (stainless steel): 3 mm Maximum sheet thickness (mild steel): 4 mm Maximum sheet thickness (aluminium): 3 mm Travel paths: 1,270 x 1,000 mm Turret: 20 stations (2x rotatable B-stations) Includes complete tool set! Power: 11 kVA Dimensions (LxWxH): 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg Plus 2,500 kg foundation plate

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! Bodpfx Acoxm S Hyjyoww TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Bwodpfx Acstpguzeyow Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4