Hilti dk 550 for sale
Your location was not identified (Edit)
1993
used
Electric chain hoist, electric hoist, crane DEMAG type DKUN5-500-K-V1F4
No.: 61409392 Year of construction: 1993
Load capacity 1000 kg
Hook path 5 meters
Stroke speed 4 m/min.
Fine lifting speed 1 m/min.
2 load lines = 1000 kg
Mains connection 400 Volt, 50 Hz.
- Cable length of the control bottle 4,5 meters
Weight 50 kg
Glwcygl
sound condition more
1999
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
Yr8h3s
-DEMag DKUN 5-500 KV1 F4
-Bearing capacity 1000 Kg
-Main lift 4.0 m / min
-Fine lift 1.0 m / min
-Chain length 2,7 m
-Dimensions 540/520 / H700 mm
-Eigen weight 61 kg more
gebr. Electr. Chain hoist make DEMAG
Model DKUN5-500 KV2F4. No.: 61610672 year of production 1993
Niwmh
Lifting capacity 500/1000 kg
Hook path:
2-line 1000 kg 2000 mm
1-line 500 kg 4000 mm
Main hoist 6.3 m / min
Fine Hub 1.5 m / min
Engine 1.7/0.42 kW
Power supply 400 V
Chain 5 x 15 80 K
2-stranded more
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer
-Nomination 450 W
Nnz0r
-Mains connection 220 V
-with suitcase and accessories
-Dimension 410/130 / H310 mm
-Weight 8.8 kg more
Weishaupt gas heating
Good condition, used, see pictures
55 - 550 kW
Length 3,3 m
width 1,15 m
height 1,65 m
Year of manufacture 2012
. basis for negotiation: € 1.900,- net ex stock
Bfbk7dofla
Transport and assembly possible on request.
Visits are possible at any time by appointment.
Further information on request.
Constantly over 3000 running meters of pallet racking
in stock from numerous manufacturers
Changes and errors in the technical data, information
and prices and subject to prior sale! ... more
Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark.
According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer.
Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exteri... more
Cast iron T-slot clamping angle
Technical data:
clamping surface 700 x 550 mm
G0swhd7
Floor space 500 x 550 mm
material thickness 60 mm
with
- Six horiz. T-slots
little used, in very good condition more
used
Hammer drill, chisel hammer, combination hammer, Bosch hammer
-Manufacturer: Hilti, combi hammer
-Nominal recording: 1400 W.
-Speed: 0 - 282 rpm
-Bore performance: concrete Ø 80 mm / steel Ø 20 mm
-Delivery: in a case with accessories
-Dimension: 600/140 / H380 mm
D8gmnah
-Weight: 13 kg more
good (used)
Planscheibe mit einem Durchmesser von 550 mm
Gewindedurchmesser 95 mm
Cpzo3im3a
Hoehe 120 mm more
2 Aggregates pro side (Disc+Cup-Brush) Top + Left side - Tiltable
Speed 6-20 M/Min. - Frequenzy
Sanding-spindels various speed 300-1200 rpm. Frequenzy
SIKO on spindels and top-pressure
Woodpiece Lenght: Min/Max.: 400/X mm. Width Min./Max.: 20/175 mm.
Woodpiece Thickness Min./Max.: 20/100 mm
El: 3x400 V / 50 Hz Druckluft 8 BAR
Iylytzloi more
Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark.
According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative Technology where it makes sense for our customer.
Are surface spraying machine is equipped with No. 2 traverses and can paint material up to 200mm high and 1.800mm wide (standard is 100mm x 1.300mm).
We can offer it with 1-2 paint circles for easy color management.
It can be combined with our innovative dr... more
Rental of the machines possible, prices on request, favourable conditions for long-term rentalMobile concrete mixing plant with tandem bogie: The logical choice when mobility and economy are the focus!The mobile tandem bogie models of fibo intercon offer compact and sophisticated solutions, which are designed for optimal flexibility, performance and operational safety:Volume (gross/net): 1800/1200Power: 25-30 cbm/hEngine power: 30 kWMixing arms/wall scraper: pcs. 6 / 1 Aggregate silos: pcs. 2 x ... more
Sliding table saw FORMAT 4 kappa 550 X-motion
Year of constr. 2009, used, functional
Main motor 7.5 KW
Scoring unit 1.1 KW
X-motion control with overhead LCD touch display 5.7 “with parts list holder
Various programs and applications programmable (see pdf document)
Circular saw unit 0 - 46 ° pivoting maintenance-free.
Saw blade D 250 - 550 mm
Cutting height max. 200 mm
Format sliding table 3200 mm long, anodized with trimming shoe
controlled rip fence kappa 55X for cutting width 1600 mm
Scorin... more
used
Toggle dowels, anchor hooks
Qkxiwypdn
-Type: EKD-HM5
-Quantity per package: 25 pieces
-M4 threaded rod
-Price: per package
-Number of packages: 21
-Weight: 1 kg/package more
used
Toggle dowels, anchor hooks
-Type: EKD-HM4
-Quantity per package: 50 pieces
-M4 threaded rod
-Price: per package
Qkqaidk2b
-Number of packages: 12
-Weight: 1.2 kg/package more
used
Nail gun, nail gun
Qksobghhg
-Bolt gun: Hilti DX A41
-Suitcase
-Number: 4x shooting devices available
-Price: per piece
-Weight: 6 kg more
2003
used
Nail gun, nail gun
-Bolt gun Hilti DX 460
-Magazine: MX 72
-Suitcase
-Number: 2x shooting devices available
Liaif
-Price: per piece
-Weight: 6 kg more
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer
-Nominal consumption: 650 W
-Mains connection: 230 V
-Drill
Lib2d
-Weight: 27 kg more
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer
-Nominal consumption: 650 W
-Mains connection: 230 V
-Drill
Djif70r
-Weight: 15 kg more
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer
-Nominal consumption: 650 W
-Mains connection: 230 V
Qlmty9n2b
-Drill
-Weight: 9 kg more
used
Bending tool, die, upper blade, upper tool, straight tool
Tool for bending machine
Tool for wire mesh, mesh wire
Tfiula
Pitch wire 50 mm
Thickness 25 mm
Drawing images
-Gesamtlänge 550 mm overall height 194 mm weight 20 kg more
1993
ready for operation (used)
Injection Unit
Screw diameter 135 mm
Shot weight 7343 g
Injection pressure 1050 bar
Screw speed 5-120 r/min
Clamping Unit
Clamping force 13000 kN
Opening stroke 1650 mm
Injection Unit
Screw diameter 135 mm
Shot weight 7343 g
Injection pressure 1050 bar
Screw speed 5-120 r/min
Clamping Unit
Clamping force 13000 kN
Opening stroke 1650 mm
This ENGEL ES 10000/1300 DK Injection Moulding Machine was built in Germany in 1993. This machine can works with a clamping force of 13000 kN, and an injectio... more
Edge bander
SMA-REF-6778
Type: edge banders
Manufacturer: Hebrock
Model: AKV 3006 DK-F
Year: 2005/2012
Working range:
Workpiece thickness: 10 - 40 mm
Edge thickness: 3/8 mm
Features:
Gluepot
Bl2lz8mtzt
Joint milling (DIA)
HF-cutting saw
HF-chamfer milling
Grooving saw
Corner rounding
Srcaper
Buffing
Condition:
in use
ready for your test
Kuper-checked 2012
Location: Western Germany
Dimensions:
5.250 x 1.400 x 1.650 mm
1,6 tons
Availability: 11/2020 more
Rotary valve for air transport (1x), Make Waeschle, Type DK-320 "easy clean", New unknown (manufacturer tag is missing), Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotor diameter 320mm, Rotor width 315mm, Inlet 280x210mm, Inlet flange sizes 380x300mm, Outlet dia. 100mm, Outlet flange sizes dia. 155mm, Daylight 475mm, With motor 0,75 KW, 219-241/380-420 Volt (Ex), Rotor speed ± 27 Rpm, Air purged sealings , Floorspace 1,3x0,9 M, Total height 0,5 M,... more
Quick planer make KLOPP type 550
machine # 52605, year of construction 1965
Oef29
Technical data:
Smallest stroke length 2 mm
Largest plane length 554 mm
Swivel of the tool head right 45° each
maximum distance from bottom edge of ram guide to clamping surface 450 mm
Table clamping surface Length 500 mm
Table clamping surface width 316 mm
Table with 3 grooves 120/ 14 mm
Table vertical movement by hand 380 mm
Lateral self-movement. / by hand 500/ max. 640 mm
Stroke rates 15.5 / 31/ 55/ 79/ 11... more
Even today we can deliver abroad!
SIGMA SELECT
300 // 400 // 550
Modular three-phase MIG / MAG and MMA inverter machine.
From basic, manually operated welding equipment to advanced high-quality welding equipment with 550 A.
SOLID, VERSATILE,
MADE WITH THE FUTURE IN THOUGHTS
This welding machine will amaze you. There is no better way.
Designed for intelligent welding, it goes far beyond the usual welding.
Use it for assembly, heavy industry and automated solutions.
Ideal for dedicated weld... more
used
Gear motor, electric motor, electric gear motor
Fh2qoht
Speed 19 U/min
Performance 0.18 KW
Design B3
Diameter shaft 30 mm
Protection class P54
Price per piece
-2 x available
Dimensions 530/250/H220 mm
Weight 31 kg more
1994
used
Used machine
Year of construction: 1994
with quick heat adhesive container
with chop saw up to 5 mm edge thickness
with milling station equipped on request with combined indexable insert milling cutters
Hle8xrqrs
for radius, straight and chamfer milling
Outriggers, foldable and extendable to the front
with trolley
availability: short term
Location: Röllbach more
working table size 800 x 450 mm
x-axis 500 mm
y-axis 400 mm
z-axis 200 mm
I9dmd8d
z-2 axis 300 mm
working tank size 1.170 x 690 x 425 mm
max. elektrode weight 220 kg
max. workpieceweight 1.350 kg more
Rotary valve for air transport (1x), Make Waeschle, Type DK-320 "easy clean", New unknown (manufacturer tag is missing), Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotor diameter 320mm, Rotor width 315mm, Inlet 280x210mm, Inlet flange sizes 380x300mm, Outlet dia. 100mm, Outlet flange sizes dia. 155mm, Daylight 480mm, With motor 0,75 KW, 219-241/380-420 Volt (Ex), Rotor speed ± 27 Rpm, Air purged sealings , Floorspace 1,3x0,9 M, Total height 0,5 KG... more
Pressure: 45 ton
Ram stroke adjustable: 10 - 40 mm
Bb83j7vi2l
Ram adjustment: 50 mm
Shut height (stroke down, adjustment up): 220 - 300 mm
Free frontal opening L-R: 560 mm
Table surface area : 550 x 450 mm
Ram surface area: 550 x 360 mm
Hole in table: 450 x 100 mm
Number of strokes: 100 - 500 s.p.m.
Required power: 7,5 kW
Weight of machine approx.: 6,2 ton more
2019
new
Sprue picker of the Enmair Group
ER series - 550 / 650 / 750 / 850 (V)
Application range from 50 - 250 to. injection moulding machine
Horizontal travel depending on type 550 / 650 / 750 / 850 mm
C3zuhaom
Vertical travel depending on type 125 / 125 / 170 / 170 mm
Swivel angle 50 - 90 °
Gripper angle 90°
Lifting weight max 3kg
bracket on the backside allows easy change to
Swivel angle to the right / left, as required
required operating air pressure 5 - 7 bar
220V 50 Hz
Several of these devices can... more
used
Gear motor, electric motor, three-phase motor, electric gear motor
Speed 78 rpm
Power 0.37 KW
Type B5 diameter shaft Ø 25 mm
Protection class IP65
0bbmswl
Brake
Dimensions 540/220/H230 mm
Weight 22 kg more
new
Bauer G12-10/DK 84-200 3~ motor with brake EKK 005 A 9 HN 1778046-2 , hole spacing of the mounting holes: 105 x 180 mm, drive shaft: 25 mm , unused, 100% functional, scope of delivery according to photos
Bfqc9to3pb more
turning diameter 554 mm
turning length 2000 mm
control GE FANUC ALPHA
centre height 280 mm
swing diameter over face slide 370 mm
swing in the gap 830 mm
spindle bore 90 mm
spindle turning speed range 15 - 1800 U/min
spindle nose D 1 - 8" Camlock
spindle drive 11 kW
feeds - longitudinal 0,03 - 0,4 mm/U
feeds - cross 0,015 - 0,2 mm/U
rapid travel - longitudinal/face 3 / 1,5 m/min
thread - mm pitch 14 mm
bed width 400 mm
radial face slide travel 310 mm
tailstock quill diameter 95 mm
tailstock qui... more
Rotary valve for air transport (1x), Make Waeschle, Type DK-320 1/12 NN, No. 55153/05, New 1994, Material Mild steel, Stainless steel, Housing material Mild steel, Rotor material Stainless steel, Rotor diameter 320mm, Rotor width 310mm, Lock sizes 310x90x50mm, Inlet 280x210mm, Inlet flange sizes 380x300mm, Daylight 475mm, With motor 1,1 KW, 230/400 Volt, With variable speed drive , Floorspace 0,8x0,7 M, Total height 0,5 M, Extra Specifications Housing chromed inside, Extra information lock sizes... more
used
2007
used
Gebhardt - roll soft just + left
Type 356.10
Built in 2007
Max. Weight: 30 kg / m
Weight: 40 kg / m
Conveyor width: 550 mm
Abschiebeelement: Rolls
Off valve angle: 45Â °
Conveying height: 680 mm
Installation position: horizontal
Conveyor speed: 0.35 m/sec.
The Gebhardt roller type 356.10 is a mechanical
Off lock facility. Conveyed is laterally when running on main drive from the funding flow to the conveyor belt with over the
Main drive fitted to driven rolls.
Overal... more
Make Waeschle, Type DK-320 "easy clean", New unknown (manufacturer tag is missing), Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotary valve for air transport (1x), Rotor diameter 320mm, Rotor width 315mm, Inlet 280x210mm, Inlet flange sizes 380x300mm, Outlet dia. 100mm, Outlet flange sizes dia. 155mm, Daylight 475mm, With motor 0,75 KW, 219-241/380-420 Volt (Ex), Rotor speed ± 27 Rpm, Air purged sealings , Floorspace 1,3x0,9 M, Total height 0,5 M,... more
2020
new
Empty weight: 110 kg
CE mark: yes
Serial number: DPX-27509
EP Marked: yes
EPA Marked: yes
Puhnfe
Transport dimensions (LxWxH): 1 x 0.6 x 0.4
Automatic Transfer Switch - ATS Panel - ATI Panel
800 Ampere - Applicable for generators up to 550 kVA more
used
Work bench for bench drilling machine working table, Assembly, mounting table, Workbench
Ss0e70
-very stable design
Width 3790 mm
Depth 550 mm
Height 980 mm
-with plastic plate 20 mm
Weight 282 kg more
2007
used
Gebhardt - roll soft just + right
Type 356.10
Built in 2007
Max. Weight: 30 kg / m
Weight: 40 kg / m
Conveyor width: 550 mm
Abschiebeelement: Rolls
Off valve angle: 45Â °
Conveying height: 680 mm
Installation position: horizontal
Conveyor speed: 0.35 m/sec.
The Gebhardt roller type 356.10 is a mechanical
Off lock facility. Conveyed is laterally when running on main drive from the funding flow to the conveyor belt with over the
Main drive fitted to driven rolls.
Overa... more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sell now on Machineseeker! Over 160,000 inquiries per month
10 valuable tricks for buying used machines online
New Machineseeker.com TV commercial with Michael van Gerwen
Machineseeker now also sponsering Greuther Fürth
Photo gallery: The World's 10 biggest excavators
