Used Heavy Drill Machine for sale (67,415)

Condition: used, Spindle Speed 80-3200 U/min. 30 mm 25 mm table surface area 500x365 mm bore depth 125 mm Iiedpfezdu Uusx Aquec throat 260 mm MK 3 distance spindle /table 90-840 mm T-slot - width 14 mm column diameter 110 mm weight of the machine ca. 270 kg

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Isdpjzdqttofx Aqusic Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Tapping capacity up to M16 8 tapping chucks Iisdpfjzdp U Nox Aquec Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: used, Year of construction: 2022, functionality: fully functional, ZAFFERANI AZV MILL 1000 – Year 2022 Vertical CNC Drilling/Milling Machine Working area: 200 x 1000 mm Minimum glass dimensions: 500 x 300 mm Maximum glass dimensions: 3400 x 3210 mm Thickness: 3-25 mm Iiedpfxoy Ulvgs Aquoc Minimum hole diameter: 8.5 mm Power: 8 kW IN PERFECT CONDITION

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Ijdpfx Aozdki Uoqueic Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: excellent (used), functionality: fully functional, EMERSON DRILLING AND MILLING MACHINE MODEL 40 TC CROSS TABLE Iodpfxszfpyne Aqueic USED MACHINE, IN WORKING CONDITION INTERNAL CODE: SVR 413

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling Iiodpfex Hfh Tox Aquec 7. Milling

Condition: used, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles, designed for automatic drilling of holes in materials of specific dimensions. The machine features an automatic feeder that streamlines the machining process by automatically feeding and clamping the material. The MM05/3L's technical specifications include: Iisdpfx Aqsxrpcisuoc - 7 oscillating spindles, - adjustable oscillation, - pneumatic material clamps, - production capacity of several hundred pieces per hour. The machine features a robust construction, flexible work settings, and CE certification, ensuring safety and compliance with European standards. It is suitable for production applications requiring precise multi-point drilling on a variety of materials, typically found in the furniture and woodworking industries. The automatic material feeder, working in conjunction with the multi-spindle drilling unit, increases the efficiency and repeatability of production processes, minimizing operator involvement and improving work ergonomics.

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units Iijdpfexrmptjx Aquec - 2 vertical units - 4 front-mounted units (two on each side)

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm 2. Width: 1800 mm / with arms extended Height: 1600 mm Depth: 1200 mm Condition: good, second-hand Isdozfhd Ejpfx Aquoic

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Iijdpfx Aoyl Idaequsc Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation Iiodpfx Aomnntmsqusc - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Iedpotzctmsfx Aqusic Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Iisdpszd Rizjfx Aqujc Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: excellent (used), Year of construction: 2003, operating hours: 3,800 h, functionality: fully functional, Good morning, I am selling a complete set ready for drilling operations: - Vermeer D7x11a horizontal drill, 2003, ~3800 operating hours. It underwent a major overhaul a few years ago, has almost a full magazine of Hunting drill rods, and is in very good technical and visual condition. - Vermeer mixing unit with a 120 l/min bentonite pump, 2003. Tank capacity: 1200 l. - Iveco Eurocargo 100E18 E5 truck, 2012, ~290,000 km. Equipped with an additional tank (1100 l), shelving, a water transfer pump, a water filling system, a Cintropur filter, tool holders, and a custom-made external aluminum toolbox. Aluminum ramps are also included. The vehicle has undergone a full service at an authorized Iveco workshop. Oils, filters, front and rear brakes, new headlights and windshield, and new batteries have all been replaced. The vehicle is in excellent condition. - An additional D7x11a drill for parts - the machine is practically complete, missing only a few elements and parts. The engine is in working order. I will include a starting drill rod, a drilling head, a locking sleeve, and 3 reamers (90-230 mm) with the drill. Iiedpfx Aqozd Ribsuoc The set is currently used only occasionally, but it is ready for operation at any time.

Condition: good (used), Year of construction: 1998, working area 3 - 50 mm lip angle 40-180 ° drill diameter 3-50 mm weight of the machine ca. 0,18 t dimensions of the machine ca. LBH 0.9 x 1,0 x 1,40 m Incl. workpiece head for switchable 1:1 / 1:2 ratio Incl. special web-thinning attachment for split-point grinding Iijdpezczhgsfx Aquoc Incl. 6-jaw chuck Incl. work light Incl. operating manual

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Please contact us if the gear stages are no longer functioning correctly as intended. Iiedpfx Ajy Rfzusqujc

Condition: like new (used), Year of construction: 2012, AGIECHARMILLES drilling EDM machine, model DRILL 20, manufactured in 2012. Travel: X 300, Y 200, Z 300. Maximum drilling depth: 200 mm. Table: 400 x 300 mm. CNC unit with 12" TFT touchscreen. Sequences drilling points until the electrode is used up. Maximum workpiece weight: 300 kg. 30A generator. Electrode diameter: 0.1 - 3.0 mm. Dielectric pump pressure: 70 bars. Ijdpfozd D Rrjx Aqusic Dielectric tank capacity: 16 liters.

Condition: good (used), travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm Ijdezd Dmgspfx Aqusic - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Ijdjzd Dl Nopfx Aqujic Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t Iodpfx Aozd Dgmoqueic

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Iodpsy At Iyjfx Aqusic Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Iodpfx Ajw Npyqequeic Stationary machine: Yes Clamping system: Clamps Safety: Light barrier Control and software SCM XILOG Minimum footprint: 3920x1170x2150

Condition: new, 18 mm M 12 M 14 MK 2 Iiodsyv Nddjpfx Aqusc 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection Option 12 - LED machine light, with radially adjustable light beam, power rating 230 V, protection class IP 65

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm Iijdpfjzcqyfjx Aquoc throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump