Used Grinding Device for sale (14,831)

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt Kdedpfx Aoxaarqoh Eet scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Kdsdpjxaa Swsfx Ah Eet Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded Kodjxabhgjpfx Ah Esdt - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table Kedpfxsxabkze Ah Eodt - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor Kedsxaappepfx Ah Eedt - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: Kodpfxjxab Its Ah Ejdt - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Kdodpfx Aexab R Ijh Eot Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned Kodey Erxvopfx Ah Esdt - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm Kdedpfxjxaaxqs Ah Est radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. Kdsdpfx Asxab Dzjh Eet range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley Kdodpfsxaapvex Ah Ejt - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable Kjdpfsxabaiox Ah Eedt - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : Kedjxaapijpfx Ah Eedt - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the Ksdpfsw U U Tgsx Ah Eodt . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , Kedpoxaaicefx Ah Ejdt . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features Kedpfxsxaavcj Ah Eodt - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: used, Year of construction: 2007, Control SIEMENS 840D powerline spindle drive 11 kW grinding wheel diameter 400 mm grinding wheel width 100 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Kdodpszy Sinjfx Ah Est

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 Kdjdpfx Ahetxkuns Est -Number: 1x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: like new (used), Year of construction: 2009, grinding length: 1,300 mm, grinding width: 650 mm, workpiece weight (max.): 1,200 kg, grinding wheel diameter: 400 mm, table load: 1,200 kg, grinding wheel width: 100 mm, spindle speed (min.): 1,450 rpm, overall weight: 6,000 kg, grinding spindle motor power: 11 W, travel distance X-axis: 1,300 mm, travel distance Y-axis: 550 mm, rotational speed (max.): 1,450 rpm, Equipment: documentation/manual, DELTA MODEL MINI 12 SURFACE GRINDER Kedpezy Ewrefx Ah Eodt MAXIMUM GRINDABLE SURFACE AREA 1300x650 ELECTROMAGNETIC CHUCK 1200x500 GRINDING WHEEL DIMENSIONS 400x50x127 AUTOMATIC DRESSING ON HEAD / TABLE TANK WITH PAPER FILTRATION MANUALS YEAR OF MANUFACTURE 2009

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Load capacity: 125 kg Hook path: 3.8 meters Kjdexcil Espfx Ah Eodt Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. 1 load strand

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Kdsdpfxexcil Se Ah Eot Fine lifting speed: 1.8 m/min 1 load chain

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Kedpfx Ahedzqacj Esdt Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle Kodpfxsd N E Rvj Ah Esdt 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: new, functionality: fully functional, inner diameter: 160 mm, outer diameter: 275 mm, grinding wheel width: 160 mm, Reishauer grinding wheel blanks, new – unused – unprofiled 6 pieces, EK article E04239 Manufacturer: Reishauer Reishauer article no. 418041.36 Specification: A80G8V0167, 80 m/s 1 piece, EK article E04514 Manufacturer: Reishauer Reishauer article no. 418041.38 Specification: A120G8V0176, 80 m/s SITAB grinding wheel blank, new – unused – unprofiled 7 pieces, EK article E01117 Manufacturer: SITAB Specification: 9A120.1J9V101PF, 80 m/s Dimensions for each: 275x160x160 mm (outer diameter/inner diameter/width) e.g., suitable for a Reishauer grinding machine RZ160 / RZ260 A.M.O. - Schnarrenberger Kedpfxjz Ah Ras Ah Eodt Price on request All technical specifications are subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: good (used), functionality: fully functional, Used Haas grinding machine in good condition, fully functional. Kdedpfxszdrmhe Ah Eet