Used Granite for sale (234)

Condition: excellent (used), functionality: fully functional, Granite Plate Djdpfx Astcrk Tjb Tscr - Dimensions 1200x910x200mm - Quality appx. Class 0 or better (will be checked) - incl. different taper inserts - frame on demand Was a former base for a Zeiss rotary table RT05/800

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Djdjfy U Ewspfx Ab Tocr Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: excellent (used), Granite Measuring Plate Vibration Insulated  Measuring plate made of grey-black granite  as a base for assembly, control and laboratory purposes Outer edges visibly ground Stainless steel threaded and fitting holes Base with vibration insulation (membrane air spring insulators) Panel size 2000 x 1450 x 400 mm (WxDxH) Weight approx. 4000 kg Dcodpfsh Ri Ausx Ab Ter Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, total height: 80 mm, total width: 560 mm, total length: 755 mm, Tesa Granite Plate (from CMM) Dcedpfjr Ell Ssx Ab Tjr - Dimensions 750 x 560 x 80mm - Quality class appx.1 - with M8 threads - measuring protocol on demand - without steel frame

Condition: used, Hard stone plate, granite plate, granite block Dodpjg Uar Dsfx Ab Tscr Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, total height: 150 mm, total width: 750 mm, total length: 1,000 mm, Granite Plate (from former Mitutoyo CMM) - Dimensions 1000 x 750 x 155mm Dodpfxswlvuho Ab Tscr - Quality class appx.1 - incl. M8 threads - without steel frame

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Dcjdpsh Uhq Dofx Ab Tsr Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Condition: good (used), total height: 80 mm, total width: 450 mm, total length: 650 mm, Granite Plate (from former Mahr surftest) Dodpfx Asvmd Hceb Tecr - Dimensions 650 x 450 x 80mm - Quality class appx.1 (will be checked on demand) - incl. some holes (column) - inserted t-slide - for table use

Condition: excellent (used), functionality: fully functional, total height: 500 mm, total width: 300 mm, total length: 5,500 mm, overall weight: 2,200 kg, Granite Beam (Öelze) - Dimensions 5500 x 300 x 500mm - Quality class 00 flatness = 11µm (2µm/1000mm) - measuring protocol on demand - incl T-slot on rear side, energy chain on the front side - with granit feet (working height appx. 850mm) incl. air bearing sliders for measurement of straightness and so on. Dcjdpfx Abor Ellro Tjr Incl digital readout (2x)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Granite Plate - Dimensions 1450x2000x400mm - Quality appx. Class 0 (will be checked) - with or without corss beam - incl. different taper inserts - frame with antivibration units Dcsdpjgrhhtefx Ab Tor Was a CMM base for a Zeiss FC600

Condition: used, Year of construction: 2024, Field of application: Mining Dimensions (LxBxH): 1500 x 320 x 420 cm Polygonmach is set to revolutionize the mobile crushing industry with its PMST Mobile Sand Making Plant, a state-of-the-art solution for the efficient processing of a variety of materials, regardless of their hardness level. Be it granite, basalt, dolomite, gabbro, or limestone, the PMST produces consistently satisfying results. With a production capacity ranging from 80-250 tph, this powerful machine caters to diverse processing needs. Its maximum feeding size capacity spans from 80-180mm and has a feeding height of 3.8 meters. The PMST's total motor power ranges between 220-320 kW, requiring an electric generator of 550-850 kVA for smooth operation. This compact machine weighs 36 tonnes and measures 15(L) x 3.2(W) x 4.2(L) meters, and comes as a single chassis on wheels equipped with hydraulic opening legs. The PMST Mobile Sand Making Plant features a series of high-performance components: Feeding Hopper with vibrating feeder Feeding Conveyors Vibrating Screen with 3 decks Feedback Conveyor Stockpile Conveyors Mobile chassis with hydraulic legs Automation System with PLC and remote controller Dcodex Dzbujpfx Ab Ter Dust Removing System Electric Generator Set (Optional) Should the need arise, it is possible to affix a diesel electric generator set to the chassis of the plant. User-friendly and easy to assemble, the PMST can be operational within a few hours of arrival at the job site. On request, the feeding hopper covers and stockpile conveyors can be equipped with a hydraulic opening mechanism, allowing the entire system to transition to working position without the need for any external equipment. Operational mode: manual Technology: pressure Other characteristics: mobile

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data Dcjdpfx Absx A Ur Rj Tsr For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: new, functionality: fully functional, overall weight: 52,000 kg, total length: 10,400 mm, total width: 6,800 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Multi diamond wire machine to cut 20 or 30 mm thick slabs. Dodpfx Abexdh Rcs Tecr The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses. Price from €uro 500.000

Condition: used, Make: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year: 2008, Serial No.: 077238, Control: Rexroth Indramat, Type System 200 BTV20, incl. manual operation terminal, Workpiece diameter: 95 mm, Max. workpiece length: 59 mm, Max. spindle speed C (workpiece): 6,000 [rpm] / 7,000 [rpm], B (tool): 2,000 [rpm], Max. feeds Z/X: 60 m/min, Honing head ZNG-No.: 416101804-8, year 2008, Serial No.: 221, Machine bed granite, Manufacturer: Eckbert Reitz, Type HFSL204HS2, year 2008, Workpiece automation, Surface finish inspection device, Oil catch tray, Pump: Brinkmann, Type TH160/350-001, Operating hours as of 18.11.25: 69,518 Dedpfx Aox Ahc Njb Tscr

Condition: excellent (used), I am selling a granite milling machine, in very good condition. Djdpswpxzlofx Ab Tocr

Condition: good (used), functionality: fully functional, machine/vehicle number: 66259, total width: 600 mm, total length: 800 mm, total height: 900 mm, overall weight: 500 kg, Contour measuring instrument Incl. granite measuring plate Plate dimensions: 670 x 450 mm Incl. various measuring tools NOTES ON COLLECTION: Collection must take place strictly between December 10 and 12 FCA Winterlingen, loaded onto truck Dcjdexnkb Sjpfx Ab Tor

Condition: excellent (used), Year of construction: 1998, Contour measuring device / roughness measuring device Tester T 8000, granite plate Wave System 630 x 500 x 100 mm, Waveline 60 Advanced, base unit Wavelift 400, base tilting unit 60 for Wavelift, probe arm TA 20. UPGRADED in 2010 !!! Dcodpjxhdvisfx Ab Ter

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Djdpstynfgsfx Ab Tscr Price from €uro 250.000

Condition: excellent (used), I will sell a stone or granite splitter. - serviced, no leaks in very good condition. For sale: Obolith Steinwerke GmbH - semi-automatic press with roller conveyor I offer a more advanced hydraulic press with automatic collection by roller conveyor, ideal for serial production of precast concrete elements. Dcodpfxewpxzfs Ab Tor Specification: • Manufacturer: Obolith Steinwerke GmbH • Model: With roller conveyor • Company inscription: “Stein-reich an Ideen” • Foot operation (start pedal) • Safety switch and external controller • Electric-hydraulic drive • Solid frame, designed for intensive use Ideal for automation of block, hollow block, curb production processes.

Condition: excellent (used), Year of construction: 1994, 3D coordinate measuring machine Measuring range X/Y/Z 1000/660/460 mm Measurement uncertainty 3.5 + 4L/1000 μm Table load 800 kg Renishaw swivel head Granite plate 1500 x 900mm, Z-axis approx. 600mm Measuring software: Tutor with PC Dcjdpfx Abotqcyge Tor

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Dcodpfx Abevtdzte Tor

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Dcedpfsxdi Agsx Ab Tjr

Condition: used, functionality: fully functional, GRINDING PLANT capacity 1 t/h with roll press, sieving in 3 granulometries with nutation screen and horizontal screens. Input: inlet grain size < 10 mm (marble, granite and quartz) with loading by big-bags on the included hopper. Dcedpjx Agxvjfx Ab Tsr Output: 3 grain sizes (0-50, 50-100 and 100-300 microns). 70% of 100-300 microns, 15% of 50-100 and 15% of 0-50 microns. Storage with propulsion system for sending to silos (silos not included)

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes Dcodpfxoxdi Rwj Ab Ter The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. The line can process several materials: quartz, granite, marble, and porcelain stoneware.

Condition: used, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 350 mm, table width: 1,770 mm, table length: 3,550 mm, overall weight: 9,000 kg, total length: 5,890 mm, total width: 2,990 mm, total height: 3,125 mm, tool diameter: 140 mm, tool length: 200 mm, tool weight: 15,000 g, tool magazine motor power: 12,000 W, SPECIAL PRICE Dcodpfx Abjxdiupj Tor Advanced Cnc Router for Drilling, Contouring and Shaping slabs in Marble, Granite, Quartz, Ceramic, Lapitec to create kitchen and vanity tops