Used Gkt 60 for sale (21,098)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,183 h, load capacity: 6,000 kg, lifting height: 7,000 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 3,320 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,230 mm, opening width: 2,147,483,647 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Djdpfx Aju Dy Riec Neun Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/70T P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Heating, full cabin, full free lift, Platform height: 960 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 11,010 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Sideloader Load center of gravity: 700 Dsdpfx Acsv U Ey He Njun Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ 60/14/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 13,329 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,200 mm, empty load weight: 9,490 kg, total length: 5,120 mm, drive type: Treibgas, construction width: 2,000 mm, Sideloader Load center of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Duplex Dujdpfswaca Hjx Ac Non Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JGQ 60/12/40V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. NIVO forks Heating, full cab, full free lift, Platform height: 1050 mm

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Dsdsyhq T Njpfx Ac Neun Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,856 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following specifications: Operating hours: 6,856 Lifting capacity: 2,500 kg Lift height: 6,040 mm Overall height: 2,750 mm Year of manufacture: 2014 STILL 2.5 tonne electric forklift truck with full cabin, triplex mast with full free lift, side shifter, 4th valve, good battery, four levers, single-pedal control, roadworthy lighting (compliant with German StVZO), fork length 1,200 mm, charger included. Price includes service per STILL manufacturer's specifications and valid UVV (accident prevention regulation) inspection upon sale. The following options are available at an additional cost: - New rear tires - Cosmetic reconditioning Inspection, demonstration, and test drive are available by prior telephone arrangement. Sale is exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Dujdpfeyhp Huox Ac Nsn More information and further offers are available on our website!

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,090 h, load capacity: 2,500 kg, lifting height: 3,680 mm, free lift: 150 mm, fuel type: electric, mast type: other, construction height: 2,480 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 Electric Forklift with the following specifications: Operating hours: 3,090 Lifting capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,480 mm Year of manufacture: 2017 STILL 2.5 ton electric forklift with full cabin, telescopic free lift mast, side shifter, good battery, good tires, fingertip controls, roadworthy lighting according to StVZO, fork length 1,100 mm, charger included. Price includes service according to STILL manufacturer specifications and valid safety inspection (UVV) at the time of sale. Duodpfx Aoyhpz Esc Non The following options are available at an additional cost: - Optical reconditioning - Different fork length Inspection, demonstration and test drive available by appointment by phone. Sale exclusively to commercial customers. Subject to prior sale, errors and typographical mistakes. We can deliver your new forklift cost-effectively with our own loading ramp low-loader (transport costs on request). For more information and further offers, please visit our website!

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm Djdpfx Acst D Nz As Neun L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Djdpfx Acsyhnxvs Noun Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Dujdpfjyhnm Tsx Ac Nsn Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: good (used), axle configuration: 3 axles, first registration: 01/2018, total length: 12,800 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Chassis type: Full chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Body year: 2018, Drum volume: 60, Drum volume unit: m³, Compartment division: 1 compartment, Type of load: Silo = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Djdjyhl H Rspfx Ac Neun Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 12 mm; Tire tread right: 13 mm Axle 2: Tire tread left: 14 mm; Tire tread right: 13 mm Axle 3: Tire tread left: 12 mm; Tire tread right: 9 mm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Proper business conduct • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more… Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Stator knives: 3 Dodpfxswikago Ac Nsun Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: used, Year of construction: 2002, Operating hours: approx. 9,000 h Lifting capacity: 4,500 kg Dsdpfx Acow Nn A De Njun Electric forklift truck Still R 60 – 45

Condition: used, Rotatable: +- 45° Chain width: 17 mm Motor: 2.2 kW Table tilting: +- 45° Further data: See PDF Mortiser for lock cases, door lock mortiser, or also chain mortiser / chain chiseler Framar type MC 60 for simultaneous milling of lock cases and drilling door holes in doors and windows as well as many other applications. Chain width: 17 mm Dusdpfx Astunbusc Non Motor: 2.2 kW

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Dsdpok E Dxksfx Ac Njun Output:18,5 kW RPM: 2930 Loading capacity depending on viscosity.

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: Dodpeyhcybefx Ac Nsun All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Dedpfx Acoitvkue Neun Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Technical Specifications & Performance Data This MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation. Djdpfoyhbgaex Ac Neun Manufacturer: MESAL Model: E50-60-15GA1 Year: 2013 Production speed: up to 18,000 bottles/hour Configuration: Rinser/Filler/Capper tri-block Filler valves: 60 Rinser grippers: 50 Capper heads: 15 Container type: PET Base format: 0.38L (380 ml) Neck finish: 38 mm Fill principle: Weight (gravimetric) Operating type: Automatic Electrical: 400 V, 60 Hz Control system: Omron PLC/HMI Approximate weight: 8,000 kg Advanced Automation & Control Systems The machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation. Omron PLC with modular I/O and clear status indicators Touchscreen HMI for parameter management and alarms Automatic operation with synchronized turrets Designed for stable weight-based filling accuracy Electrical supply: 400 V, 60 Hz Production Line Integration Capabilities This filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint. Inline integration with standard bottle conveyors Rinser/Filler/Capper tri-block layout for reduced floor space Suitable for still beverages: juice and tea Designed for PET bottles with 38 mm neck Base format 0.38L; additional formats can be supported with change parts Machine Condition & Maintenance History The machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and electrical assemblies present a solid basis for recommissioning into a used bottling line or second hand beverage production setup. Operational status: In storage Available for recommis...

Condition: good (used), Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder Dsdpfx Acswytz Uj Njun -CNC turning tool holder: 47 pieces turning tools DIN 69880 -Hole: Ø 60 mm -Different types: see photos, parts list -Shipping/Price: only complete -Transport dimensions: 1200/800/H185 mm -Weight: 284 kg

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Duodpfx Acou E Hzwo Nsn

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Dedsq Rdqnopfx Ac Njun

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,670 mm, fork length: 1,200 mm, total length: 3,880 mm, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 Duodpfxoyg Rg Ts Ac Nen - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm Djdpeyg N Shsfx Ac Neun wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Combi line - float and laminated glass cutting Long live upgrade 2022: Console Keybord Touchscreen Windows 10 Dodpfx Acex Dr Ews Neun Combi cutting line float + laminated glass consisting of: 1 x S-CUT-1408 Lisec GFB 60-30S-RE with low-E grinder shape cutting jumbo 3300 x 6000 mm 1 x S-CUT-1409 Lisec VB 33 laminated cutting bridge cut 3300 mm max from 3300 x 6000 glass 1 x S-CUT-1410 Lisec BHK 60-30 breakout and unloading or reverse loding table 2022: MODIFICATION-SERVICE PC-Upgrade from I-PC 2004 (WinXP) to I-PC 2018 (Win10 LTSC) new 18" touch display new keyboard new control terminal MBF-372 new monitor bracket SOFTWARE UPDATE Upgrade GPS.hand 5.38 to LIS.hand The Upgrade includes the following modules: -Lis.hand Basis -NC Code Converter -Quickopt Add on HASP dongle remote installation Update GPS.mon 6.53 ESL to the latest Release (covered by the mc) The GFB+VB+BHK 60/30 refers to a high-performance automatic glass cutting and breakout line manufactured by LiSEC. This system is designed for high-capacity industrial glass processing, handling large formats (jumbo sheets) of both float and laminated glass. System Components The alphanumeric code describes the specific machinery units integrated into the line: GFB 60-30 (Glasschneidetisch für Floatglas): A high-speed, CNC-controlled glass cutting table for float glass. The "60-30" indicates its capacity for jumbo sheets, typically up to 6,000 x 3,300 mm. VB 33 (Verbundglasschneidbrücke): A specialized cutting bridge for laminated glass. It typically includes tools for scoring the top/bottom glass layers and heating/cutting the PVB interlayer. BHK 60-30 (Brech- und Hilfskipptisch): A breakout and unloading table. It facilitates the controlled snapping of glass sheets along the scored lines and serves as the exit point for the finished pieces. Key Technical Specifications Maximum Sheet Size: 3,300 mm x 6,000 mm (Jumbo size). Glass Thickness: Typically handles float glass from 2 mm to 19 mm. Advanced Features: Newer or reconditioned models often include Low-E grinding for edge deletion, shape-cutting scanners, and Windows-based control systems for optimization.

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table Dusdpfjyg Inujx Ac Nsn - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 2007, Book stacker Sigloch BSD-60 Year: 2007 For stacking of finished books, book blocks, packages or similar products. The stacker is moveable and height adjustable. Description: - Turning device Dodpfx Ajvhcyqec Noun - Straight delivery