Used Gildemeister Gds 65 for sale (238)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm Bljdoyaqgyepfx Adrsi - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Blsdsy Axuxjpfx Adroi

Condition: excellent (used), Year of construction: 2016, operating hours: 75,078 h, functionality: fully functional, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year of manufacture: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % DC) Spindle speed: up to 4,000 rpm Partial hollow chucking device (hydraulic) Draw tube inner diameter: 104 mm, 848 mm depth C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Tool disc magazine: 36-position NC tailstock with mounted, hydraulically traversable quill and fixed live center Absolute, direct measuring systems on X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filtration fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Bjdpfx Adey A Hngoreli Control CNC controller: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120-position (instead of 36-position) Mechanical oil mist separator, filter class H13 Chuck flushing device on main spindle Coolant supply through spindle Tropical package (up to 40°C ambient temperature) Workpiece measuring probe BLUM TC60 incl. cycle package 3D data model of work area (STEP / IGES) Profibus interface Hand-held control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock version for torque-proof pressure device Coolant & Chip System Coolant cleaning unit: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic roller MW180 Process pumps: 5 bar / 20 bar Chip conveyor type 300 S-2 (wear-resistant design, XAR) Return delivery pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister service and is in technically excellent condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Disassembly, loading, transport, and recommissioning can be organized Machinery Trade Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 76,595 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 320 mm, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 7, This 7-axis Gildemeister TWIN 42 was manufactured in 2008. It features a CNC control Siemens 840D Powerline, two 12-station star turrets, and live tooling capabilities. The machine has a tailstock stroke of 230 mm and is equipped with a optional chip conveyor. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 42 horizontal turning machine we have for sale. Contact us for further details. • CNC Control: Siemens 840D Powerline • C-Axis: 2 • Y-Axis: Upper Slide • Cross Slides: 2 • Turrets: 2 × 12-Station Star Turrets • Live Tooling: 2 Bljdpfx Adjzhbtxsrei • Tailstock Mounted on Counter Spindle Slide • Tailstock Stroke: 230 mm • Tailstock Force: 300 daN • Tailstock Center: MT3 • Overload Clutch for X- and Z-Axes • Chip Conveyor: Bürener, optional not included • Tool Monitoring System: Artis CTM • Workpiece Diameter: Ø 6–65 mm • Maximum Workpiece Length: approx. 300 mm • Maximum Workpiece Weight: 3.5 kg • Bar Feeder Interface, optional not included • Bar Feeder: IRCO SiMag 42 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,375 h, This 7-axis Gildemeister TWIN 42 was manufactured in 2004. It features a Siemens 840D Powerline CNC control, two 12-station star turrets, and live tooling capabilities. The tailstock has a stroke of 230 mm and a force of 300 daN, making it suitable for workpieces with a diameter of Ø 6–65 mm and a maximum length of approximately 300 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 42 machine we have for sale. Contact us for further details. • CNC Control: Siemens 840D Powerline • C-Axis: 2 • Y-Axis: Upper Slide • Cross Slides: 2 Bledpjzhblhsfx Adrji • Turrets: 2 × 12-Station Star Turrets • Live Tooling: 2 • Tailstock Mounted on Counter Spindle Slide • Tailstock Stroke: 230 mm • Tailstock Force: 300 daN • Tailstock Center: MT3 • Overload Clutch for X- and Z-Axes • Chip Conveyor: Bürener, optional • Tool Monitoring System: Artis CTM • Workpiece Diameter: Ø 6–65 mm • Maximum Workpiece Length: approx. 300 mm • Maximum Workpiece Weight: 3.5 kg • Bar Feeder Interface • Bar Feeder: IRCO SiMag 42, optional 3 other machines available with following defects: • Machine 1: Hydraulic line defective on turret 1 or 2 • Machine 2: DINA module removed, pressure clamp (reports that the collet is not closed) • Machine 3: Main spindle defective with bearing damage, HS clamp defective, LT module missing, DINA module missing

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Bledoyrggmepfx Adrji Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm Bledpfowwv Ifsx Adrsi max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min Blodpfx Aoy I A U Hsdroi total power requirement 44 kva weight of the machine ca. 6 t

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Blsdpfoy Tx Awex Adrei Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Bjdpfx Ajxmd Txsdroli Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Blsdpfxjzh Ewhs Adrei Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Blodpfxezh Ea No Adrei Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN Bljdjzgw Tfepfx Adrsi quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Bjdpfozgupkjx Adreli Operating hours: 14,000

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances Bjdpfxjzhufho Adreli X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm Blodpfezggahex Adrei - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Bljdpfxezgdk Do Adrji Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Year of construction: 2005, condition: ready for operation (used), A Gildemeister CNC lathe is available. Tool stations: 8, max. turning diameter: 350mm, max. swing diameter over bed/cross slide: 400mm/270mm, max. turning length: 650mm, travel X/Z: 220mm/700mm, rapid traverse: 15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 2800kg, control: Fanuc 10i, automatic operating hours: approx. 462h. Documentation available. An on-site inspection is possible. Bljdpfxezhntfo Adrsi

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, Counter spindle: 6,000 rpm, C-axis Turret: 12 stations Siemens 840D Powerline Counter spindle Y-axis Bledpfezf Hqksx Adrei Chip conveyor C-axis Driven tools Bar feeder

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis Bedpfeglf A Hsx Adroli SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

Condition: used, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control system Equipped with powered tools. Distance between centers (TDC): 1000 mm Turning diameter above the bed: Ø 680 mm Turning diameter above the carriage: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Powered tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Max. chuck diameter: 500 mm X-axis thrust: 8 kN Z-axis thrust: 15 kN Rapid traverse rate X: 24 m/min Bodpjzhgmkofx Adroli Rapid traverse rate Z: 30 m/min Loose headstock Tailstock diameter: 120 mm Tailstock stroke: 120 mm Taper: MK5 (6) Tailstock force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without screen: 2000 mm Width with screen: 2450 mm Height: 2200 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The displayed price does not include VAT (VAT can be reclaimed by businesses).

Condition: good (used), Center height 260 mm Trestle holder MK 4 Blsdpfxeralkmo Adroi Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Bsdpfx Adevr Eh Esrsli Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Multispindle lathe GILDEMEISTER GM16-6 Bljdpfx Adozhcp Ujrei

Condition: good (used), Year of construction: 1999, NEF520 year of manufacture 1999 Bodpfey S Eu Rox Adrsli