Used Gildemeister Ctx for sale (242)

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 67-3-2142, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, overall weight: 18,000 kg, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Maximum workpiece feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Operating voltage: 380V Lhsdjyk Alpepfx Ahvsd Frequency: 50 Hz Rated current: 120 A Dimensions & Weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t EQUIPMENT Configured for 6 spindles External reference: 1

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Lhjdpfx Ahsxrg S Iovsd Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Lsdpfx Ahsyv Dnkjvehd Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Electrical connection/total power: 65 kVA • Tool holder: VDI 30 • Tool changer type: Turret • Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle) • Axes travels: • Slide 1 (Top): X1 (Cross) 300 mm; Z1 (Longitudinal) 650 mm; Y1 (Vertical) ±40 mm (only on version with Y-axis) • Slide 2 (Bottom): X2 (Cross) 180 mm; Z2 (Longitudinal) 650 mm • Slide 3 (Counter spindle): X3 (Transverse) 175 mm; Z3 (Longitudinal) 670 mm • Counter spindle: max speed 5000 rpm; power 26 kW (40% ED) / 21 kW (100% ED) • C-axis: Integrated for oriented stopping and contouring • Driven tools: 12 stations per turret; all 12 stations capable of driven tools; max power 11.7 kW; speed up to 4000 rpm Additional equipment • Touch probe • Chip conveyor • Internal coolant supply Technical Specification Taper Size VDI 30 Lsdeyvz Ibepfx Ahvehd Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Ledpfx Ahjyvy Rnevshd Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Year of construction: 2008, condition: ready for operation (used), A CNC 7-axis counter-spindle lathe DMG Mori is available. Turning diameter: 640mm, max. turning length: 1185mm, travel X1/X2: 550mm/180mm, travel Y: +/-90mm, travel Z1/Z2: 1185mm/1050mm, rapid traverse X/Y/Z: 40m/min/24m/min/70m/min, speed: 5000rpm, B-axis: +/-120°, machine dimensions X/Y/Z: approx. 7800mm/4000mm/3000mm, weight: approx. 15000kg, control: Heidenhain plusIT Pilot, machine hours: 51320h, spindle hours: 34158h. Documentation available. An on-site inspection is possible. Lsdoywy R Djpfx Ahvjhd

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min Lhedpjvh I Tvsfx Ahved total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex location: CNC lathe Gildemeister, Type CT 60, year of manufacture 1992, CNC control EPL 2. Turning diameter 360 mm, turning length 1000 mm, swing diameter over bed 600 mm, swing diameter over cross slide 360 mm. Travel X 1100 mm, travel Z 380 mm. Chuck 250 mm, spindle bore 108 mm, spindle speeds 16 – 3150 rpm, drive 30 kW. 12-position turret, driven tools, rapid traverse 10 m/min. Tailstock MK 5, quill stroke 180 mm. Accessories: jaws, chip conveyor. Weight 6.5 tons. Price: EUR 3,500 plus VAT ex location. Lhjdpfxsyvzbus Ahvjd

Condition: good (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 2601-0324, spindle speed (min.): 6,500 rpm, spindle bore: 42 mm, travel distance X-axis: 326 mm, travel distance Y-axis: 265 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 6,500 rpm, type of input current: three-phase, bar passage: 42 mm, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul. The following components have recently been renewed: - Drive motor of the driven tool 2 replaced - Sub spindle newly fitted with bearings - New door interlock switch installed Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations Axes / travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm. It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg. Inspection & collection: On-site inspection is possible Ljdpfx Ahoyvy I Tevehd If you are interested or have technical questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 rpm total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle Lhjdeyubdfepfx Ahvod - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered Lhsdpfoxa Epbjx Ahvjd - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Please give us your quote for the machine ----- Without packaging; Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Lodpfx Ahehv H Hyjvshd

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. Lhedpfxewym Nfe Ahvjd A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 2004, Mfd. 2004 Gildemeister Twin 65 CNC Lathe Specifications Chuck Size: 8" Bar Capacity: 2" Lsdpfx Ahsyq S Ugovohd Turning Diameter: 8" Spindle Speed: 5,000 RPM Control: Siemens CNC Control Distance Between Centers: 20" Turret: 12 Station Sub-Spindle: Yes Chip Removal: Chip Conveyor Features Barfeed Included

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min main drive motor 7 kW 3-jaw-chuck diameter 200 mm total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Lodpfx Aheyutucsvehd More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Ljdpfx Ahsyutrujvshd apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand FANUC Model Fanuc 310 This 4-axis Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information. Application Types Ledpfx Ajx D Ekgshvshd Turning

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Manufacturer: DMG/ GILDEMEISTER Model: CTV250 Lhedewzk D Aepfx Ahvsd Year of manufacture: 2003 Serial number: 06800001511

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. Lhedoyaqr Aepfx Ahvjd • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Additional equipment • Mechanical and electrical preparation for fire extinguishing system • Cooling system with 600l capacity and 50µm filter • Pump with options of 8 or 20 bar • IEMCA Boss 332E bar loader for bar length up to 3m • Bristol B270/E oil mist separator • Moving headstock (80mm) with tools on slides plus tool breakage detection Machine Benefits Lhjdpfx Ahox D H I Tjvod Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 7,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 7, This 7-axis Gildemeister Twin 41 horizontal turning machine was manufactured in 2006. Ideal for precision and complex turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Gildemeister Twin 41 horizontal turning machine. Contact us for more information. Additional equipment • Double spindle version • Y-axis • Main and counter spindle • Collet chuck • 1 attached tool axial Ledjx D Saujpfx Ahvjhd • 1 attached tool radial • Belt filter system • Loading magazine FMB Turbo 10-72 XT Machine Benefits Technical Machine Benefits • Rotation diameter 145 mm • Chuck diameter (spindle 1 + 2): 140 mm • Longitudinal slide travel z1, z2, z3: 320 mm, 345 mm, 380 mm • Vertical slide travel y1: +/- 30 mm • Longitudinal spindle travel z3: 380 mm • Tool stations: 12, all stations attached • Shank diameter: 25 mm • Speed of the attached tools: 6000 rpm • C-axis: 2000 rpm • Pitch: 0. 001° Extra Information Machine still under power

Condition: used, Parts donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control unit Eltropilot EPL 2 Machine no. 4.5733 Year of manufacture: 1989 Machine not operational – electrical issues Standard turning diameter: 185 mm Max. swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Longitudinal slide travel (Z-axis): 450 mm Spindle bore: 52.7 mm Spindle passage in draw tube: Ø 42 mm Max. feed rate X and Z: 3000 mm/min Spindle speed: 40–6300 rpm, stepless Spindle drive motor power: 22 kW Power supply: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT Ø 200 mm - 12-position tool turret, VDI 40, every second station powered - Powered tool stations at 6 positions Ljdpfx Aodzqm Rjhvohd - Electrical cabinet placed beside the machine Footprint (complete machine) L x W x H: 5000 x 2500 x 2100 mm Total weight of the unit: approx. 5.7 tons In good condition Transport dimensions: Required space for basic machine L x W x H: 3000 x 2300 x 1900 mm Weight of basic machine: approx. 4.8 tons Required space for electrical cabinet L x W x H: 2500 x 550 x 2000 mm Weight of electrical cabinet: approx. 450 kg Without chip conveyor Main motor missing Individual parts available on request

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Lhodpfeyrggmex Ahvjd Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8086010539B, spindle speed (max.): 6,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,500 rpm, feed length X-axis: 65 mm, feed length Y-axis: 120 mm, feed length Z-axis: 350 mm, total height: 1,920 mm, total length: 4,900 mm, counter spindle motor power: 3,700 W, counter spindle speed (max.): 6,500 rpm, number of axes: 6, DMG Gildemeister Sprint 42 Linear (year of manufacture 2008) with IEMCA Boss 545‑E bar feeder The main and counter spindles have been newly re-bedded, and the machine has undergone a comprehensive general overhaul. Additionally, the following parts have been newly replaced: - Counter spindle dismantled, newly re-bedded, and overhauled - Ball screw of the Y-2 axis replaced - Main spindle newly re-bedded - New clamping fingers and clamping rollers on the main spindle - New work area lamp Lsdpoyt E T Usfx Ahvohd - New valve manifold for the main and counter spindle clamping units - New rotary union for the bar feeder - 4 new driven tools The DMG Gildemeister Sprint 42 Linear is specifically designed for automated turning operations. With two workpiece spindles, six linear axes, and optionally two C-axes, it enables simultaneous machining on the main and counter spindles. The maximum bar capacity is 42 mm, and the high spindle speed reaches up to 6,500 rpm. Technical specifications: Axes & slides: Travel distances X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm with rapid traverses up to 30 m/min. The second slide provides X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm with rapid traverse 30 m/min (X2/Z2) or 18 m/min (Y2). Tool capacity: Turret with 26 stations; accepts both fixed turning tools and driven tools for milling and threading operations. Spindles: Main and counter spindles with 6,500 rpm, nominal ratings 5.5 kW (main) and 3.7 kW (counter), torque (S1) 37.5 Nm and (S2) 19.6 Nm. Control: CNC Fanuc 160i‑TB with SlimLine control panel and 15" color TFT – intuitive operation via industrial PC. Dimensions & logistics: Base machine (L × W × H): 3,354 × 946 × 1,571 mm, weight 4,700 kg. Control cabinet: 5,400 × 680 × 1,750 mm. Machining center at ergonomic height of 1,100 mm. IEMCA Boss 545‑E bar feeder (type 32 LL, year of manufacture 2007) The included bar feeder greatly facilitates series production. It is designed for bar diameters up to 42 mm, weighs approx. 860 kg, and operates at 400 V/50 Hz; required compressed air connection is 6 bar. If you have any questions or require further information, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, Equipment: documentation/manual, We are offering this ready-to-use DMG GILDEMEISTER CTV 250 CNC turning and milling center, year of manufacture 2008. Manufacturer: DMG GILDEMEISTER Model: CTV 250 Year of manufacture: 2008 Ledpfx Ahsyt Dudovohd Condition: operational Machine type: CNC turning and milling center Operating hours: Power on: approx. 76,300h / Spindle run: approx. 61,440h The following components are included in the sale: - Pallet circulation system - Conveyor belts for finished parts - Chip conveyor Regular maintenance has been carried out and documentation can be provided. If you have any questions or need further information, please send us a message or call us.