Used Fort F 21 for sale (38,710)

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Gedpexxi T Usfx Al Tjiw Reference: R-A0117

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Giodpfoia Naqsx Al Tew Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm CE marked Technical specifications subject to change

Condition: used, Year of construction: 1976, Machine type: Universal milling machine Manufacturer: SHW Model: UF21 Year of manufacture: 1976 Control type: NC Country of origin: Germany X-axis travel: 1050 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper ISO: SK40 Spindle head swivel right-left: 90° Quill travel: 180 mm Spindle speed range: 36–1800 rpm / 18 steps Feed rate X+Z: 0.3–1800 mm/min Feed rate Y: 0.3–900 mm/min Rapid traverse X/Z: 1800 mm/min / Y: 900 mm/min Table size: 1200 x 550 mm Total power requirement: approx. 10 kW Estimated weight: 4400 kg Machine dimensions (L x W x H): approx. 3.1 x 2.5 x 2.2 m Gsdpfx Ajxwnm Del Tjiw Spindle motor power: 6.8 kW

Condition: used, Thickener: Giedoq R Rkropfx Al Tsw Max planing width: 410 mm Min planing height: 3 mm Max planing height: 240 mm Min length of planed piece: 180 mm Knife shaft diameter: 100 mm Number of knives: 4 2 feed speeds: 7/14 m/min Knife shaft rotation: 5000 rpm Manual adjustment of working height Equalizer: Total length of worktops: 2200 mm Adjustable tops Knife shaft silencing Knife shaft guard Extraction spigot: 120 mm Culaga tilting 0-45° Culaga length: 1200 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1130 mm

Condition: excellent (used), mileage: 25,562 km, power: 353 kW (479.95 HP), first registration: 08/2021, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,090 mm, total width: 2,540 mm, total height: 3,610 mm, Year of construction: 2021, Equipment: AdBlue, = Additional Options and Accessories = - PTO (Power Take-Off) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 17,150 kg Payload: 18,850 kg Gross vehicle weight: 36,000 kg Functional Pump: Yes Condition Technical condition: very good Gedpfx Ajyiuk Ijl Teiw Visual condition: very good MERCEDES AROCS 8X4 WITH MULTILIFT ULT T 21 S 51 ROLL-OFF TIPPER + HIAB X-HIPRO 232 E-6 CRANE EURO 6 L PACKAGE 480 HP 8X4 DRIVE AP AXLES AIR SUSPENSION WHEELBASE 515 CM AROCS CAB MODEL WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE MULTILIFT 21-TON ROLL-OFF TIPPER TYPE: ULT T 21 S 51 ADJUSTABLE UNDERRUN PROTECTION HYDRAULIC CONTAINER LOCKING HIAB X-HIPRO 232 E-6 CRANE 6X HYDRAULICALLY EXTENDABLE RADIO REMOTE CONTROL 5TH + 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 5400 KG MAX WORKING HEIGHT 2000 CM MAX LIFTING CAPACITY AT 200 CM 870 KG 2X OUTRIGGERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Giodpfsx Upxxsx Al Tsw Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Gsdecnz Rvspfx Al Teiw Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Gedpfeff Hdpjx Al Tjiw Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg Godpfxsd Tyaaj Al Tsiw - immediately available - Will be shipped within Germany for €90.00 net.

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Gijdpszka Iyofx Al Tew

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Misc. accessories MARCELS MASCHINEN AG Gsdpfxszhmfys Al Toiw

Condition: like new (used), Washing brushes for Lenhardt glass washing machine 2,3m, Stock: 8 pieces, New brush rollers for Lenhardt / Bystronic glass washing machine 2,3m washing height Godpsuig Ebsfx Al Tjiw

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Gedsxcblqepfx Al Tjiw centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Gedpfx Ajb Umtkjl Tsiw

Condition: excellent (used), Year of construction: 2024, We offer this very good FORTEVER-AEMCO FT-1504HC embroidery machine, year of manufacture 2024. Manufacturer: FORTEVER-AEMCO Model: FT-1504HC Year of manufacture: 2024 Condition: very good Category ID: 19 Type: embroidery machine If you have any questions or need more information, feel free to send us a message or give us a call. Gedpfx Aley Efndo Tjiw

Condition: reconditioned (used), functionality: fully functional, Fortuna UAF470 Surface Splitting Machine – Leather Splitting Machine Main features: - Working area: 470 mm - Material feed: upper and lower roller - Automatic knife positioning - 3 material feed speeds - Manual material return - Dust collector and waste bin Gjdpfx Aey Dvhlel Tsiw Machine in perfect technical condition, fully refurbished

Condition: reconditioned (used), functionality: fully functional, Fortuna NAF470 Surface Splitting Machine – Leather Splitting Machine Main features: - 470mm working width - Automatic knife positioning - Two material feed speeds - Waste bin Godpfx Alsyzi T Ns Tsiw Machine in perfect technical condition.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB Giodpfjt I Emvjx Al Tow

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Godpfexg Ekfsx Al Tjiw

Condition: good (used), 2 electronic handwheels from a cycle lathe MONFORTS KNC 8 with rotary encoder no. 6FC9320-5DC00 Gijdpfew Elwrex Al Tsw Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Fortuna Automat Grüße 4 E 30-part roll press With moulding deactivation Dough input: 1200–3300 grams Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Knives made of stainless steel Gisdpfsxcqgdsx Al Tow Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: ready for operation (used), functionality: fully functional, Maximum Turning Diameter 1250 mm Turning Diameter Over Bed 780 mm Turning Diameter Over the saddle 580 mm Turning Length (Faceplate) 760 mm Normal Way of the Cross Support 600 mm Normal Way of Top Support 350 mm Acceptable Turning Diameter in the gap (with Rear Toolpost) 1120 mm Bed Width 575 mm Main Spindle Rotation 4-640 RPM Gedpsriv Slefx Al Tjiw Maximum Torque 800 Nm Spindle bore 80 mm

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Gsdpfxeyhqb Ts Al Teiw

Condition: used, mileage: 614,240 km, power: 320 kW (435.08 HP), first registration: 06/2015, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 06/2023, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,600 mm, loading space width: 2,450 mm, Equipment: air conditioning, crane, navigation system, soot filter, Equipment: Fixed tow bar * Crane with remote control * Navigation system * Sleeping berth * Electric windows * Axion camera * Hands-free system * Gelhauss superstructure Speed control: Cruise control Air conditioning: Air conditioning unit Gedpfx Aozlpx Dol Tsiw Cargo area: Length 5.60 m; width 2.45 m; height 30 cm The truck is in very good condition! Absolutely fixed price! Fixed price!!!

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gjdozln Ecepfx Al Toiw