Used Film Development for sale (2,214)

Condition: used, Year of construction: 2007, Glunz & Jensen C85 clean-out Unit Year of Construction: 2007 Cpedpfx Ajwcnd Noc Neu input width 85 cm cleaned and tested All offers are subject to prior sale.

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Codpfxegyzzus Ac Nspu Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Cpsdpfx Acovvlyio Nsu Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Cpjdpfx Acorp E Nrs Neu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fuji Film LUXEL T-6500CTP S Thermal Platesetter (2017) – B2 Format Technical Details and Equipment List: A. CTP PLATESETTER – LUXEL T-6500CTP S ● Technology: Thermal CTP ● Year: 2017 ● Laser Head: 32-channel (S Version) ● Productivity (B2): Up to 21 plates/hour at 2400 dpi ● Max Plate Size: 830 x 660 mm ● Min Plate Size: 324 x 330 mm ● Imaging Area: 830 x 636 mm ● Plate Thickness: 0.15 – 0.30 mm ● Resolutions: 2400, 2438, 2540 dpi ● Power Supply: 200/240 V, 47/63 Hz, Single-phase 35 A / 5 kW ● Weight: 830 kg ● Dimensions (L x W x H): 1985 x 1315 x 1300 mm ● Condition: Used, in daily production. Available for immediate inspection and testing. B. RIP & SOFTWARE SYSTEM ● RIP Processor: FujiFilm XMF PROCESSOR V6 4UP BUNDLE ● Functionality: RIP for B2 format, standard screening, HR/LR output, ICC/DLP/CIP3 support ● License: XMF DONGLE ONLY security key included ● Computer: Dedicated PC for XMF Gateway C. PLATE PROCESSOR ● Model: FLH-Z 85CD ● Max Plate Width: 850 mm ● Min Plate Length: 285 mm ● Plate Thickness: 0.15 – 0.40 mm ● Developing Speed: 15 seconds (dip to nip) ● Developer Tank: 30 L ● Weight: 364 kg (dry) Commercial Information: ● Availability: Machine is active in production. Reason for sale is an upgrade to a larger format. Cjdpfx Acsxm Td Hs Nepu

Condition: used, Filmatic bottle fillers are typically designed for the automatic filling of various types of bottles, including plastic, glass, or metal containers. Here are some general details about them: - Types of Fillers: Codoyc Tr Dopfx Ac Njpu - Gravity Fillers: Rely on gravity to fill bottles and are ideal for thin liquids. - Features: - Adjustable Filling Volumes: Many models allow for the adjustment of fill volumes to accommodate different bottle sizes. - Speed and Efficiency: Modern fillers can operate at high speeds, reducing bottling time in production lines. - Sanitary Designs: For food and beverage applications, these fillers often have designs that prioritize cleanliness and ease of maintenance. - Integration with Other Machinery: Filmatic bottle fillers can often be integrated with capping and labeling machines for a complete bottling line solution. - Applications: - Used widely in industries like food and beverage, pharmaceuticals, personal care, and chemicals. - Suitable for filling various products, including juices, sauces, cleaners, oils, and pharmaceuticals. - Manufacturers: Various manufacturers produce bottle fillers under the Filmatic brand, specializing in different technologies and solutions for bottling needs. Filling Heads: 8 Capping Chucks: 3 Volumes: 100-2000 ml Cap Size: 38 mm Bottles / Hour: 4000 Filling type: Gravity Previously used: Juice & Cider Infeed: Left to Right Machine Type: Monoblock Bottle Distance: Screw Type Control Panel: Included Cap Feeder: Included Condition: Good/Complete

Condition: new, Year of construction: 2025, Equipment: auto duplex, Demo System Revoria Press SC285S Low usage, as it was only used for demonstrations. Meter reading available upon request. Configuration can be customized as required. Pictured configuration: SC285S with Fiery SC21 Pink Toner Enabling Kit Air Suction Feeder C1-DSXL Banner Unit for Air Suction Feeder C1-DSXL Post Card Kit for Air Suction Feeder Cpedpfx Aexgqvmjc Nou Envelope Kit for Air Suction Feeder Interface Decurler Module D1 Static Eliminator D1 Charge Corotron Assembly for Static Eliminator Smart Monitoring Gate D1 Finisher D6 with Booklet Maker Banner Print Extension Kit Extra Sale/Rental exclusively within Germany! Price on request! Unfortunately, we regret to inform you that we do not process sales outside of Germany. We kindly ask for your understanding and request that you refrain from making further inquiries regarding this matter.

Year of construction: 2015, condition: excellent (used), Semi-automatic pallet wrapper Inv. No. 3583 Manufacturer: Filma Type FP 30 ES Year of manufacture: 2015 * Turntable positioning via fixed stop * Number of foot and head wraps * Turntable diameter: 1650 mm * Maximum wrapping height: approx. 3200 mm * Net weight: approx. 500 kg Cedsv Ty Iijpfx Ac Nspu * Suitable for block panels * With access ramp * Very good condition

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width Cpsdpfx Asx Hx Rnoc Neu • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Maximum machinable width: 230 mm Max. forward feed speed: 12 m/min Operator shafts number: 4 Cpsdpfx Acjybavte Neu

Condition: not inspected (used), Year of construction: 2002, Chambon (BMH) Profilmax moulder Description Infeed table 2000mm Spindle sequense bottom-right-left-top Motorpower 4/4/4/5,5 kW Power (total) 26kW Planing width: 230mm Planing height: 120mm Spindle diameter 40mm 2000 kg Csdpfx Aoq Iir Noc Njpu Dimensions 3250 x 1600 x 1600mm CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Csdpsxn Uptsfx Ac Nspu

Condition: new, Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Cpodpsx E U Dnefx Ac Neu We offer fully automatic circular saw machines and complete sawing centers from the "Profilma", "KS", and "SW" series with saw blade diameters up to 650 mm. Loading magazines and unloading systems are customized to your requirements. A high-performance extraction system with oil mist separator completes the comfort package. Contact us – together we will find the optimal solution for your production!

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Cpjdpfx Acsxvbvvs Nsu Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation Cjdsx Haftjpfx Ac Nopu

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Cedpfxjrg D Awj Ac Njpu This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm Csdpfx Aswgmv Soc Nopu automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Codpfx Acoxw U Syo Nepu Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 4110BC19, control type: CNC control, MACHINE DETAILS Performance Data Cedoxxklxepfx Ac Nspu Connection: 380 V Frequency: 50 Hz Rated power: 35 kVA Fusing: 63 A EQUIPMENT CNC control

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Codpfxjxn Iq Dj Ac Nopu Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Cpodpfxjxl Dz To Ac Nju Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Cjdpfjvcmirjx Ac Njpu Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors Cpedsw D T Uiepfx Ac Nsu - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,842 h, A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible. Codpjvmq Tpjfx Ac Njpu

Year of construction: 2026, condition: new, functionality: fully functional, YESOL 3500 CMS Industrial Cutting Plotter – AutoFeed CNC The YESOL 3500 CMS is an industrial cutting plotter developed by YS Solutions, based on extensive production experience in working with plastics and technical materials. The plotter is fully automated and equipped with a roll-feed mechanism compatible with standard industrial rolls, enabling uninterrupted production with no downtime. Applications • PVC, TPU • Technical and industrial fabrics • Membranes and coated materials Cedpeyg R Evefx Ac Nspu • Eco-leather • Technical films and plastics Key Specifications • Working area: 3500 × 6000 mm • Cutting speed: up to 3 m/s • Cutting system: rotary knife (tungsten steel) • Table: conveyor with vacuum system • Feed: automatic, suitable for standard rolls • Positioning: laser-based • Control: CNC with nesting functionality • Power: 11 kW