Used Errex Deutschland for sale (35,141)

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 68-3-2329, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 - 855 rpm Maximum material feed: 260 mm Maximum turning length: 155/225 mm Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A Drive pulley diameter: 317 mm Drive pulley width: 170 mm No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 - 855 rpm Maximum material feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm Hnsdpfeyk A Htsx Ad Uoh MACHINE DETAILS Dimensions & Weight Length: 7,000 mm Width: 2,000 mm Height: 2,500 mm Machine weight: 18 t Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A EQUIPMENT Configured for 6 spindles

Year of construction: 2024, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro XL 150 Liter from the premium manufacturer Rational (successor to the VCC 311). This multifunctional tilting bratt pan is equipped with the Balanced Power 34 kW option instead of 41 kW (reduced connected load). The unit has been inspected in our in-house specialist workshop, freshly serviced, and is fully functional. The lid has a minor dent on the left exterior, but this is only a slight cosmetic flaw and does not affect functionality in any way. PRICE ON REQUEST!!! Manufacturer's RRP for the variant offered: approx. €26,583 net. You will receive an invoice with VAT shown separately. Rational VarioCookingCenter iVario Pro XL 150L Equipment: Hnodpfxsyk A Abe Ad Uoh - with WIFI / Balanced Power - 3NAC400 V 50-60Hz - Capacity: 59 dm² / 150 liters - Portions per batch: 100-500 - Approval ID: LMX.100.DE - Country of installation: Germany - Balanced Power - iZone Control - Low-temperature cooking - Socket (Type F) - WIFI - USB interface (standard) - Stand with 150mm plastic feet - Hand shower with automatic retraction - Circuit protection: 3 x 63A - Recommended cable cross-section: 5 x 10mm² Technical data: Dimensions (W x D x H): approx. 1635 x 894 x 1078 mm Power supply: V: 400 / kW: 34 / Hz: 50 Capacity: 150 liters Weight: 245 kg Serial number: E31VK24048080565 Year of manufacture: 2024 Condition: used, tested, fully functional Accessories for the iVario Pro XL are available on request at extra cost. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding labor for removal and installation - High-quality brand equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Competent advice – before and after purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV 3 safety inspection Special features: - iCookingSuite – intelligent cooking assistant with 6 operation modes: Meat, Fish, Vegetables & Sides, Egg Dishes, Dairy & Desserts, Soups & Sauces, or 5 cooking methods: Boiling, Frying, Deep-frying, Braising, and Finishing - iZoneControl: flexible division of the pan base into zones with different temperatures - Low-temperature cooking (including overnight), confit, sous-vide cooking - Vario Cooking Control mode: select the desired result by touch, e.g. from light to dark - VarioBoost: patented heating system for absolutely even and precise temperature transfer - Programming mode: create manual programs and manage cooking processes - Integrated WiFi interface, e.g. for connectivity to ConnectedCooking Further details: - Integrated 230 V socket - Integrated hand shower with automatic retraction and adjustable spray - High-quality pan base - Seamless with rounded corners - Core temperature probe with 6 measuring points - 1,200 programs, each with up to 12 programmable and namable steps - Integrated hose shower at the unit, integrated water drain in the pan - Temperature unit adjustable to °C or °F - Tiltable cooking pan - Lid with integrated water inlet - Automatic service notification display - IPX5 water jet protection - USB interface for HACCP data export and updates - Including base stand with plastic feet Subject to change and errors.

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius T8 – 3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2006 Travel paths: X-axis front/rear: 3,220 / 2,600 mm Y-axis: 800 mm + 65 mm Z-axis front/rear: 850 / 1,000 mm Pendulum operation front/rear: 2 x 1,300 mm Spindle taper: SK 40 Tool magazine: 98 slots Spindle speed: 50 - 12,000 rpm Enlarged machine table Equipment: - Internal coolant supply (IKZ) 20 bar - Belt filter coolant system 780 l - 3D wireless probing system Renishaw RMP 60 - Chip conveyor - Rinsing gun - Electrostatic air filter Hnjdpfx Aoyk Avzed Uoh - Electronic handwheel HR 410/3+ - Partition wall - 2x LTA extraction units - Prepared for 5th axis

Condition: excellent (used), Year of construction: 2016, CNC Machining Center Hedelius Forte 7-3200 Magnum Hodpfsyk Arvex Ad Usnh Control: Heidenhain iTNC 530 Year of manufacture: 2016 Travel: X-axis: 3,200 mm Y-axis: 750 mm Z-axis: 800 mm Pendulum operation: 2 x 1,300 mm Total clamping area: 3,620 x 750 mm Table load: approx. 3,000 kg Spindle mount: SK 40 Tool magazine: 50 stations Spindle speed: 12,000 rpm Drive power: 29 kW Equipment: - Slant bed coolant system 900 l - Through-spindle coolant 25 bar - Chip conveyor - 2x rinse guns - Electronic handwheel HR 410 - M&H 3D touch probe 25.50 - Prepared for 4th axis - Partition wall - 2x LTA extraction systems

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 67-3-2142, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, overall weight: 18,000 kg, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you agree to collect the machine on time between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Maximum material feed: 260 mm Hnedpfx Adjyk Alpj Ueh Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A Dimensions & weight Length: 7000 mm Width: 2000 mm Height: 2500 mm Machine weight: 18 t EQUIPMENT Configured for 6 spindles

Condition: used, Year of construction: 2015, Machine-Details: Stock-No. 1022-2423 Type of machine Machining Center - Vertical Make POS Type POSmill C 1050 Year of manufacture 12/2015 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min total power requirement 25 kVA weight of the machine ca. 7,8 t Additional information: Working hours (date 10. February 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Hnjdpfx Adjykzitj Ujh Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation

Condition: excellent (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, overall weight: 400 kg, total width: 1,600 mm, total height: 1,250 mm, working width: 800 mm, battery capacity: 65 Ah, input voltage: 230 V, area performance: 6,400 m²/h, sweeping width: 800 mm, type of input current: AC, water tank capacity: 40 l, tank capacity: 40 l, Ride-on Sweeper Daewoo DS-80 - Excellent machine in superb condition - Practically indistinguishable from a factory-new unit - We purchased the machine new in January 2025 (original price €4,700) and it has only around 10 operating hours since - Equipped with a front water sprinkler (for dust suppression during sweeping) - Used only for test purposes - The entire machine is in very good condition - Includes a second, (new) set of sweeping brushes Hsdpjx Ta Izjfx Ad Usnh - Inspection of this top-class machine is not only possible but expressly welcome Please also note our attractive leasing and hire-purchase offers.

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Machine Details Manufacturer: Trumpf Type / Model: TruLaser 5030 fiber Machine Type: Laser Cutting System Cabin Protection: Safety Enclosure Color: grey / blue Spindle Arrangement: – Year of Manufacture: 2014 Laser Operating Hours (h): (not specified) Operating Hours (h): (not specified) Number of Owners: 1 Next Safety Inspection (UVV): (not specified) Control / Electrical System / Weights / Dimensions Control System: Siemens 840 D SL Operating Voltage: 400 V / 50 Hz Power Consumption (kVA): (not specified) Max. Punching Force (kN): – Hydraulic Tank (L): (not specified) Machine Weight: 12,000 kg Max. Workpiece Weight: 900 kg Max. Sheet Size: 3,050 × 1,550 mm Installation Dimensions (L×W×H): 9,500 × 6,300 × 2,500 mm Hedpeykxq Iefx Ad Uonh Max. Sheet Thickness (mm): 10 – 25 Tool Magazine (Stations): – Technical Specifications X-Axis Travel: 3,000 mm Y-Axis Travel: 1,500 mm Z-Axis Travel: 116 mm Rapid Traverse: 280 m/min Laser Output Power: 5,000 W Value-Adding Features Solid-State Laser TruDisk 5001 Laser Chiller Unit Cooling Unit for the System Universal Cutting Head Multi-chamber Extraction System Light Barriers Electric Roller Roof Hydraulically Adjustable Pallet Changer

Condition: excellent (used), Year of construction: 2018, operating hours: 56,000 h, functionality: fully functional, turning length: 1,100 mm, turning diameter: 640 mm, spindle motor power: 22,000 W, spindle speed (max.): 4,500 rpm, spindle bore: 71 mm, travel distance Y-axis: 250 mm, Montrasio GmbH offers you two excellent used NTRX 300 machines. Machine Concept Hsdpfjykvr Nsx Ad Usnh - CNC turning/milling center (multitasking) with full 5-axis simultaneous machining - 2 turning spindles (main spindle + counter spindle) - B-axis milling head (swiveling milling head) + C-axes on the turning spindles - Designed for complete machining (turning + milling + drilling + threading + contours) Working Area / Capacities - Max. turning diameter: 640 mm - Max. turning length: 1,100 mm - Distance between spindle noses (min./max.): 250 / 1,350 mm - Distance between centers (min./max.): 125 / 1,225 mm - Bar passage / spindle bore: 71 mm - Chuck diameter (typical for A2-8 version): 254 mm (10") Main Spindle (Left) - Spindle nose: A2-8 - Bar capacity: 71 mm - Speed range: infinitely variable up to 4,500 rpm - Spindle power (depending on spindle package): typically 22/18.5 kW (alternatively 15/11 kW possible depending on package) Counter Spindle (Right) - Design: full-featured counter spindle (part transfer/complete machining) - C-axis available (for milling/indexing operations) - Clamping device: hydraulic chuck (matching A2-8 configuration, typ. 10") Milling Unit / 5-Axis Kinematics - B-axis swivel range: 225° (−120° / +105°) - Y-axis: ±125 mm (250 mm total) - X/Y "square stroke" / machining window: 250 mm × 250 mm - X-axis overhang under spindle center: 125 mm (for extended machining area) - C-axis on main and counter spindle (C1/C2) Tool / Milling Spindle (typical version) - Milling spindle in B head, for drilling/milling/threading/simultaneous machining - Speed (depending on package): typically 8,000 rpm (higher speeds optional) - Power (depending on package): typically up to approx. 18.5 kW (package dependent) Tool Handling - Automatic tool magazine (ATC): 120 positions - Automatic tool changer (magazine/ATC) Control / Software - Nakamura NT-Smart X user interface/process guidance - 5-axis capable CNC platform (CAM-capable full machining, simultaneous operation) Typical Application and Process Capability (for your listing) - "Done-in-one" complete machining: turning + milling + drilling + threading + 5-axis contours - Ideal for complex parts (e.g. aerospace, motorsport, demanding precision parts) - Very well suited for automated production Machine / Hours - Unit A - POWER ON: 56,642 h 04 m - RUN TIME: 14,320 h 33 m - Date/Time on screen: 2026/02/06 – 08:43 Machine / Hours - Unit B - POWER ON: 53,501 h 58 m - RUN TIME: 9,196 h 53 m - Date/Time on screen: 2026/02/06 – 09:43

Condition: new, Year of construction: 2024, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length Hedpfx Asykvrped Ujnh • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 Hsdpoykvrcjfx Ad Uenh • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: excellent (used), Year of construction: 2012, Fanuc 18iTB control Main spindle clearance 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: Hnjdpfx Adsuldflj Uoh 6-position turret, IKZ, turret disk can be swiveled on both sides Rear horizontal slide X2 Two vertical slides X3 and X4 10 tool positions available Chip conveyor Bar feeder SAMECA

Year of construction: 1989, condition: excellent (used), control Siemens 840D solution line Grinding length outside max. 400mm Hedofwx A Sopfx Ad Ujnh Inner grinding length 200mm Grinding wheel diameter: max. 400mm Grinding wheel width: max. 63mm Outside grinding diameter 150mm Inner grinding diameter 200mm Tailstock travel: 400mm General overhauled in 2016 !

Condition: excellent (used), Clamping range Ø 15-160 mm Max. Workpiece weight 15 kg Hodperry Egefx Ad Uenh Weight of the prismatic vice 3.0 kg

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. Hnjdpfx Adsykvaye Ush feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW Hedpfxoxtvgko Ad Uonh > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm ----- Price of The above-men...

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating Hnedpfed Ih Htox Ad Ujh MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!)

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Hnedpfsd N Rt Tox Ad Ujh Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: used, Year of construction: 2008, 2008 | DAF 85.410 Hydrocureur | Used Tank Truck | 469523 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 43 inspection points 34 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Condition of the truck corresponds to its age. Significant air leakage issue at the driver's seat. Braking fault on the dashboard and noise when the vehicle is moving. The starter batteries are out of service. Functional tests on the hydraulic part for excavation and tank could not be performed. No apparent external defects. Front gauge mirror damaged. Windshield damaged. 📄 Want to see the full inspection, extra photos, or a video? Hodpfx Adsyku D Re Usnh Tip: The reference "40182 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Hnodpfjykuwwjx Ad Ueh Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Hodpfelawavsx Ad Uenh Manual swivel rotary table tool holder vice Accesories

Condition: used, Year of construction: 2007, 2007 | DAF CF 85.480 RSP | Used Suction Excavator | 188940 kms Hnedsykuvmspfx Ad Ueh 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 51300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 31 approved ✅ 5 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator, not everything is working properly. The tractor part is working correctly. No radio in the cab. Error message on the dashboard. Warning, exhaust system pipe. Provision of two remote controls for the vacuum. Presence of oxidation on the outer part of the bucket. The batteries were started using a booster. It is impossible to operate the hydraulic part, meaning the lowering of stabilizers, opening of the bucket, and tipping of the bucket is impossible to operate the hydraulic arm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40181 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Hodeykukqepfx Ad Uonh Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, load capacity: 6,300 kg, For sale is an as-new indoor crane system from Konecranes. The crane is a model S05D (single-girder overhead travelling crane) and is in nearly unused condition. Technical data: Load capacity: 6,300 kg Span: 16,945 mm Lifting height: 5.20 m Year of manufacture: 2024 Lifting speed: 4.0 / 0.08 m/min, infinitely variable Trolley travel speed: 20.0 m/min, infinitely variable Crane travel speed: 40.0 m/min, infinitely variable Equipment: Remote control: REMOX516MI (2400 MHz), including spare transmitter and storage cabinet Overload protection: Including load spectrum memory Travel limit switches: Pre- and end-position limit switches for trolley and crane travel Signal horn: Volume 98 dB Rope Angle Features (RAF): Hook collision protection, hook center positioning, and manual crane hook guiding Power supply: Safety conductor line approx. 30 m long, including main isolator switch Transport and loading can be organized Europe-wide on request at an additional charge. Prices are plus VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Hedpeykt Smjfx Ad Ujnh Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2001, This Tamglass glass tempering furnace HTF PROE 2448 CTS 20L is being auctioned online in our RESTLOS industrial auction "Site Clearance Flat Glass Plant – Glass Processing Machinery, Warehouse Equipment, Compressors, and Much More" in 01471 Radeburg. Hsdpsykt I Isfx Ad Ujnh