Used Emco Compact 10 for sale (141)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: R2EV3502, turning length: 310 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total length: 1,630 mm, total width: 2,250 mm, overall weight: 3,300 kg, bar passage: 45 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage Travel Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main Spindle Spindle connection according to DIN 55026: KK5 Spindle outer diameter at front bearing: ø 80 mm Main Spindle Drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotational Axis) C-axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Redpfowxwvajx Ahvjp Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives AC motors in X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position dispersion Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool System Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total connected load: 17 kW Machine weight: approx. 3.3 t Space requirement: 2.25 x 1.63 x 1.94 m

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Rjdpev S Ekyjfx Ahvsp Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: S6AT2502, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 250 mm Travel Y-axis: mm Travel Z-axis: 600 mm Max. spindle speed: 5,000 rpm Feed force Y-axis: 7,000 N Rapid traverse: 12 m/min DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Total height: 2,100 mm Total length: 5,000 mm Total width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm Control manufacturer: SIEMENS Control model: SINUMERIK 840D Number of tool magazine positions: 12 EQUIPMENT Rsdpowvi Euofx Ahvep Continuously variable spindle speed Chip conveyor With Y-axis and sub spindle Tool turret with 12 stations, all driven Tool holder: VDI 30 Includes 3-jaw chuck (RÖHM, Ø 250 mm)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Rsdpfx Ahowu Ecgjvsp Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Rodpfx Ahol Dr D Uovop Spindle recently changed stroke X axis 2000 stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Chip conveyor Coolant gun

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Redpfxexiy Uks Ahvep Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Y-axis 80 mm 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Accessories: Hainbuch collet chuck on main and sub-spindle Part catcher Redeppyryjpfx Ahvsp Chip conveyor Emco loading magazine LM 1200 Various tool holders

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Rjdpfxsv Iqlze Ahvep Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout Rsdpewy Hvxofx Ahvep - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Rsdpfxek Nk I Ne Ahvjp

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Rjdov Hqntjpfx Ahvsp Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R6AP3801, turning length: 600 mm, turning diameter: 360 mm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Rsdpfxow Em A Ao Ahvep Nominal current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Double spindle

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine Redpfx Ahoxc H I Rjvsp CNC control over X and Y axes by Proto Trak Type AGE 2 Also usable in conventional mode. SK40 spindle taper Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Equipped with coolant system, emergency stop, and table guard with interlock.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Rsdoxa Arajpfx Ahvep Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Rjdpfxek Nk Iwj Ahvop

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Rjdpjv Ip Izofx Ahvsp Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list