Used Elektromotor-15 Kw for sale (43,007)

Condition: used, Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm Gbjdpfxjc Niryo Af Usi -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 15/60 rpm Godpfec Uyd Iox Af Ujbi -Power: 0.1/0.45 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 410/210/H190 mm -Weight: 24 kg

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Mounted on a 500 l pressure vessel Equipped with a refrigerated dryer. 15 kW motor Capacity: 2.00 m3/min Pressure: 10 bar Year of manufacture: 2013 Gbsdpfx Asyb Dbmof Usi Operating hours: 5946 MTG

Year of construction: 2024, condition: new, Sell ​​a new WLO -15 KW, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 12.00 kW maximum heat output: 15.00 kW / approx. 150 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 1460 m3/h Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1400 rpm Air flow: 1460 m3 / h Safety: CE mark + protective net Gbsdpfx Afeixul Hj Usi

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.37 kW Gsdpfsb A Nkwox Af Uebi -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 15 rpm Gedpsb A H Svjfx Af Usbi -Power: 0.75 kW -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 40 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg Gjdpfxeb Ig Ugo Af Uobi

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW / 380/660V / 1425 rpm -Individual components: see images -Liter output: unknown Gjdpfx Aogz Iq Uef Usbi -Dimensions: 900/520/H610 mm -Weight: 261 kg

Condition: good (used), electric motor, three-phase motor -Spare part: of a CNC lathe -Power: 11/15 kW -Speed: 1460/2900 rpm -with electric clutch: 24 V and V-belt pulley -Design: B5 Gbsdpfxjb A Hcbj Af Uei -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg

Condition: good (used), Geared motor, electric motor, electric geared motor Gbjdpeb A R Nkefx Af Uji -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg Gbedsb A Siujpfx Af Uji

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 Gbjdpfxjvam Hls Af Usi -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Condition: new, functionality: fully functional, New Astronergy 420W TopCon photovoltaic panels, maximum efficiency, 12-year product warranty and 30-year performance warranty (87% after 30 years). Available: 19 pallets of 36 panels each: - 17 pallets (36 panels per pallet) in the warehouse of San Pietro Mosezzo (Novara) - 2 pallets in the warehouse of Nereto (Teramo) Gjdpfx Aswzytmef Uebi

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Gbjdpjd Db N Iefx Af Uei Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Exhibit available immediately: New variable Kaeser SK 25 SFC - 10 bar screw compressor Pressure: 10 bar Nominal power: 15 kW Gedek Adcaepfx Af Ujbi Delivery rate: 0.84 to 2.25 m³ / min Sound level: 68 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 337 kg Operating hours: 1.5 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 15 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 15 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g) : 0.48 to 2.32 m³/min at 8 bar (g) : 0.45 to 2.23 m³/min Gbjdpfxjxwb Rpe Af Uoi at 9 bar (g) : 0.45 to 2.12 m³/min at 10 bar (g) : 0.45 to 2.02 m³/min at 11 bar (g) : 0.45 to 1.90 m³/min at 12 bar (g) : 0.44 to 1.80 m³/min at 13 bar (g) : 0.43 to 1.69 m³/min Nominal power drive motor: 15 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400V/85-400 Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 410 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Gbjdpfx Afsxud Nve Uoi Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive Gbjdpfx Afegk Nlps Usi We will be pleased to send you further information on request.

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015 15 kW laser cutting system . Technical details: - Max. Sheet metal size: 12,000 mm x 2,000 mm Max. - Max. sheet weight: 235 kg/m² -Laser power (IPG): 15 kW -travel Z - axis: 125 mm Gbjdpfx Afjgyfm Eo Uei -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting range: - steel: 40 mm - Stainless steel: 30 mm - Aluminium (AlMg3): 30 mm Equipment: IPG 15000W Fiber Laser Source (Cooler included) Compact dust extraction (filter) Air conditioner in control cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter cutting head F150 focus Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal inspection (Autom. sheet metal position and sizes measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication system Motorized chip conveyor Simple user interface parameter page (power-speed-pressure) Lantek or Metalix Cad/Cam software with Autonesting Lighting for the working area Multi-chamber suction system Warning light Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for Cad/Cam programming Application training Remote maintenance

Condition: good (used), power: 15 kW (20.39 HP), Manufacturer ATB Antriebstechnik G. Bauknecht AG Power 15 kW Speed 1460/min Gedpfxoxfzcno Af Ujbi

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT Gbsdeh Eu A Nspfx Af Uji WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: used, 🔥 For Sale: Fröling P4 3–15 kW Pellet Boiler – Fully Automatic and Quiet for Residential Buildings 🔥 The Fröling P4 3–15 kW is a high-quality, fully automatic pellet boiler – ideal for modern homes, passive houses, and well-insulated buildings. It ensures whisper-quiet operation, minimal maintenance, and outstanding energy efficiency. — Key Features: 🌾 Fuel: Wood pellets ⚡ Output: 3–15 kW 🧠 Fully automatic feeding, ignition, and cleaning 🔧 Integrated control, low-noise operation 🇦🇹 Fröling – Premium pellet technology from Austria 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Gbodpfx Afjwah Sbj Uji Efficient heating systems for buildings with low energy requirements.

Condition: used, 🔥 For Sale: Fröling S3 15–31 kW Wood Gasification Boiler – Efficient and Affordable Wood Heating 🔥 The Fröling S3 is a well-balanced, highly efficient wood gasification boiler with an output range of 15–31 kW – ideal for residential homes, smaller facilities, and agricultural buildings. It offers clean combustion, long burn times, and easy operation – all at an attractive price. — Key Features: Gjdpfx Asv Uw Ehef Uebi 🌳 Fuel: Split logs / hardwood ⚡ Output: 15–31 kW 🧠 Wood gasification with optimized air management 🔧 Manual feed, large filling chamber 🇦🇹 Fröling – Austrian design focused on sustainability 💥💰 PRICE: 2,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Advanced wood gasification systems for home and beyond.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Godpfov Ammkjx Af Ujbi Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, New 15 kW variable screwcompressor FirstAir FAS SC 15 Type: FAS SC 15 Year of construction: 2022 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : min.: 990 l/min max.: 1980 l/min Installed power: 15 kW speed drive motor: 2930 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 70 +/- 3 Compressed air connection:G 3/4" Length : 960 mm Width : 930 mm Height : 1075 mm Weight : 425 kg Visit our store ! Gbedpfevz U Slox Af Uei