Used Electronics for sale (7,857)

Condition: refurbished (used), Honing machine Fsdpsw Npt Rjfx Ag Djpr SUNNEN ML3500 (like ml5000 ml2000 ec3500 ml 5000 ml 2000) this machine is currently under complete electronic retrofit (Siemens) Touch screen. Loader interface possible

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Fpsdpfx Agex Eifkj Der Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: excellent (used), Year of construction: 2023, Bareiss Bareiss digi test II – DTAA II & DTE II – Shore A Hardness Tester – Year of Manufacture: 2023 For sale is a high-quality Bareiss digi test II hardness testing system, consisting of: - Bareiss DTE II – Electronic Unit Year of manufacture: 2023 - Bareiss DTAA II – Hardness Test Stand Year of manufacture: 2023 - Bareiss Rotofix – Rotary Sample Holder Year of manufacture: 2023 - Bareiss BS 09 – Base Stand Year of manufacture: 2023 Complete, fully modular hardness testing system (digi test II) Fpedpjx Ehk Sofx Ag Djr The device is designed for precise measurement of Shore hardness on elastomers, rubber, silicone, plastics, and soft materials. Measurement is fully automatic, repeatable, and standard-compliant according to DIN ISO 48-4 / ASTM D2240. Condition: - Excellent technical and visual condition - Fully operational - German quality manufacturing Technical Data: Electronic Unit DTE II: - Input: 110–240 V AC / 50–60 Hz - Power consumption: max. 20 VA Hardness Test Stand DTAA II: - Overall dimensions: approx. 60 × 40 × 120 cm - Overall weight: approx. 45–55 kg (granite plate + test stand + table) Condition: used Scope of delivery: (see picture) - Bareiss DTE II electronic unit - Bareiss DTAA II hardness test stand - Granite measurement table - Metal table - Connection cables (Technical data subject to change and errors excepted!) For further questions, we will gladly assist you by phone.

Year of construction: 2015, condition: used, New: No Field of application: Construction Serial number: 11-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17783 Specifications AMV: Fsdpfjx Eg I Aex Ag Dopr Model year: 2015 Not certified Engine hours: approx. 2300 h Transmission hours: approx. 700 h Compressor hours: approx. 8100 h Pump hours: Pump L: approx. 8900 h Pump R: approx. 9200 h Pump H: approx. 8800 h Hammer hours: Left: approx. 3000 h Right: approx. 3200 h High: approx. 3000 h Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) Diesel tank: 160 liters Transmission: Dana hydrostatic C272.5 Max speed: 15 km/h (horizontal) Machine weight: 50 tons Central lubrication Width: 2920 mm Height: 3450 mm Total length with 18 ft feeders: 16,100 mm 4 support legs Montabert HC 110 Max impact frequency: 35 kW Max impact pressure: 187 bar Rotation speed: 50–300 rpm Lubrication air consumption: 300 L/min Flushing water consumption: 133 L/min (per hammer) Electronic feeder Charging basket Automatic drilling control Dafo Forrex fire suppression system for engine compartment Feed beams: BDS-8000 Ready for delivery Description:AMV 21SGBC-CC tunnel rig for sale.Service has been performed continuously.Everything works as it should according to the owner.Spare parts can be included for an additional cost.Ready for delivery. Own weight: 50000 Model: 21SGBC-CC tunnelrigg

Condition: new, The Servoturn 500/1000, a remarkable addition to the Conventional Horizontal Lathes category, exemplifies the innovative approach of KNUTH in the Servo-conventional Lathes group. This machine integrates cutting-edge feed technology with the reliability of traditional engineering. Its electronic hand wheels and ball screw drives enhance precision, enabling high-torque servo motors to execute feed movements with unrivaled dynamics, surpassing standard lathe capabilities. The user-friendly interface allows operators to select feed and thread pitches effortlessly, while the rapid traverses minimize downtime, ensuring high productivity. A robust machine frame and heavy-duty tailstock guarantee stability and performance, making it suitable for heavier materials. The Servoturn 500's standard equipment includes a quick-change tool holder, a 3-axis position indicator, and a reliable coolant system. Experience unparalleled turning with this advanced machine. To learn more, request a quote today and elevate your machining capabilities with the Servoturn 500/1000, a stellar choice in the Servo-conventional Lathe market. Fedjl Iy Sijpfx Ag Depr

Condition: used, Year of construction: 2002, x-travel 800 mm y-travel 600 mm z-travel 500 mm CNC-control iTNC 530 HEIDENHAIN Table dimensions Ø 600 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 15000 U/min feed range 35.000 mm/min rapid traverse 35 m/min tool change unit 30 Pos. voltage 400 V total power requirement 31 kW Fpsdpfx Agjx Edugj Dor weight of the machine ca. 8,5 t dimensions of the machine ca. 2,65 x 3,45 x 2,75 m coolant tank 2,30 x 0,80 x 0,50 m - Serial-No.: 15197 - Machine ON: 82.298 h - Program Run: 55.650 h - control: iTNC 530 HEIDENHAIN - electronic hand wheel - 3D-Touch Probe M&H - coolant equipment

Condition: new, Year of construction: 2025, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Fjdpfx Agopn Nyzs Djpr Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: new, Field of application: Mining Empty weight: 22.500 kg Volume of the tank: 55 m^3 Productivity: 500 tph Hard stone crushing and screening unit 500 tons per hour capacity 55 m3 Vıbrating Grizzly Feeder 1 1100x850mm Jaw Crusher 1 1200x6000mm Belt Conveyor 1 1200x3300mm Belt Conveyor 1 30m3 Hopper Feeder 1 Metso HP400 Cone Crusher(Chassis, Software, Engine Included) 1 2400x6000mm Vibraitng Screen 1 800x30000mm Belt Conveyor 1 800x6000mm Belt Conveyor 1 800x17000mm Belt Conveyor 1 1000x33000mm Belt Conveyor 1 20 m3 Hopper Feeder 2 VSI900 2x200kw Vertical Shaft Impact Crusher 2 1000x10000mm Belt Conveyor 1 1000x28000mm Belt Conveyor 1 2200x6000mm Horizontal Vibraitng Screen 2 800x10000mm Belt Conveyor 1 600x10000mm Belt Conveyor 1 600x20000mm Belt Conveyor 5 1000x2000mm Belt Conveyor 1 Control Panel Climated Room 1 FEEDING HOPPER & GRIZZLY FEEDER -PPG • Dimensions : 1350x6000 mm • Hoppers Volume : 55 m3 • Feeding Capacity :500-700 tons/h • Grill Dimension : 820 mm • Main Body Thickness : 20 mm • Body liners : HARDOX 450 – 10 mm • Weight : 22.5 tonnes • Vibromotors : 2 x 9,8 kW – KEMP-MEGATECH Brand, Origin: ITALY • Walking platforms are included. • 100rpm Vibrating Speed • Bolted Type Extension Covers 2 JAW CRUSHER-PJC-13 • Feeding size : 1300 x 1100 mm. • Capacity : 450-550 tph • Power : Heavy duty AC motor, 160 Kw.1450 rpm 13- VERTICAL SHAFT IMPACT CRUSHER 2x200 kw Model : VSI 900 -CR 7- VIBRATING SCREEN 2460/3 Dimension : 6.000 x 2.400 mm Screen Decks : 4 pcs CONVEYORS 3-BELT CONVEYOR : 1200 x 6.000 mm, 15 Kw motor power 4- BELT CONVEYOR : 1200 x 30.000 mm, 30 kW motor power 6- BELT CONVEYOR : 1200 x 24.000 mm, 22 kW motor power 8- BELT CONVEYOR : 800 x 30.000 mm, 18,5 kW motor power 9- BELT CONVEYOR: 800 x 6000mm, 5,5 kw motor power 10- BELT CONVEYOR : 800 x 17.000 mm, 11 Kw motor power 11- BELT CONVEYOR : 1000 x 33.000 mm, 22 kW motor power 14- BELT CONVEYOR : 1000 x 10.000 mm, 7,5 kW motor power 15- BELT CONVEYOR : 1000 x 28.000 mm, 22 kW motor power 17- BELT CONVEYOR : 800 x 10.000 mm, 7,5 kW motor power 18- BELT CONVEYOR : 600 x 10.000 mm, 4 kW motor power 19- BELT CONVEYOR : 600 x 20.000 mm,5PCS 7,5 kW motor power 20- BELT CONVEYOR : 1000 x 20.000 mm,15 kW motor power 4-12 VIBRATING HOPPER FEEDER Volume: 30 cbm /20 m2 16-HORIZONTAL VIBRATING SCREEN Model TE2260 Main Dimensions 2200mm X 6000mm 21- CONTROL CABINET AND AUTOMATION SYSTEM • Dimensions : 2200x4000x2200 mm • Electronic equipments : Siemens Brand • Air conditioner 9.000 BTU • Heat and noise isolated control cabinet • Wiring between plant equipment and control panel is included. • • Climated and isolated prefabricated control room. • Piano command table and control panels. Fedpfx Agox D Dg Te Depr • Contactors, relays, main power switch and other electrical command devices are SIEMENS mark. • Star / Delta start for crushers and delta start for other equipments. • Cabling inside the control room is included. • Cabling among the units is not included. Bunker and feeder...

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Technical Data: Control Cabinet (SE6607X-23BA0065-1): Fpedpfex Eb Haex Ag Der - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Year of construction: 2014, condition: used, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17779 AMV Specifications: Model year: 2014 Not certified Engine hours: approx. 2100 h Transmission hours: approx. 620 h Compressor hours: approx. 11 000 h Pump hours: Pump Left: approx. 10 900 h Pump Center: approx. 11 300 h Pump Right: approx. 10 800 h Hammer hours: Left: approx. 4000 h Center: approx. 3900 h Right: approx. 3800 h Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) Diesel tank: 160 liters Transmission: Dana hydrostatic C272.5 Max speed: 15 km/h (horizontal) Machine weight: 50 tons Fedpfxex Eg Ipe Ag Dopr Central lubrication Width: 2920 mm Height: 3450 mm Total length with 18 ft. feeders: 16 100 mm 4 stabilizers Montabert HC 110 Max impact frequency: 35 kW Max impact pressure: 187 bar Rotation speed: 50–300 rpm Lubrication air consumption: 300 L/min Flushing water consumption: 133 L/min (per hammer) Electronic feeder Charging basket Automatic collaring Dafo Forrex fire extinguishing system for engine compartment Feed beams BDS-8000 Ready for delivery Description:AMV 21SGBC-CC tunnel rig for sale.Service has been carried out continuously.Everything works as it should according to the owner.Spare parts can be included for an additional cost if desired.Ready for delivery. Own weight: 50000 Model: 21SGBC-CC Tunellrigg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Fedpfsx Eaaljx Ag Depr Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 960 h, Additional Equipment Thickness of the product to be processed, min/max: 8 / 200 mm Main Drive: Feed speed, min/max: 3.5 / 18 m/s // Feed motor power: 2.2 Kw (3 HP) // Vacuum motor power: 11 Kw (15 HP) Possibility to adjust the height of the grinding roller with the help of a thickness indicator Automatic stop of the sander in the event of an accident Automatic oscillation of the grinding belt with electronic control Direction of movement of the inclined belt is opposite to the feed of the workpiece Length of the bevel tape: 2620 mm // Width of the inclined belt: 1370 mm // Grinding roller diameter: 320 mm // Rubberized sanding roller hardness: 30 Sh // Speed of the inclined belt: up to 18 m/s Pneumatic switch for extremely precise positioning of the sanding roller Slanted belt blower with electronic oscillation // Electric motor power: 11 Kw (15 HP) Inverter for adjusting the speed of the sanding belt (from 3 to 18 m/s) Fsdpfjx D Na Sox Ag Djpr This DMC MASTERBRUSH MB 1350 M4 woodworking machine was manufactured in 2011. It features a control computer with a 10.4'' LCD color touch screen, a vacuum motor power of 11 Kw, and a feed motor power of 2.2 Kw. The machine can handle product thicknesses from 8 to 200 mm and speeds up to 18 m/s. Ideal for precise woodworking tasks, the DMC MASTERBRUSH MB 1350 M4 machine we have for sale. Contact us for further details. Application Types Sanding

Condition: used, functionality: fully functional, mileage: 251,030 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Fsdpjx Dz H Defx Ag Depr Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) Fpsdpsx Eaxbsfx Ag Der External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Fpodpfjx D U R Aex Ag Djr Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Year of construction: 2006, condition: ready for operation (used), Main Drive Spindle speed range 6000 rpm Fjdpfxjx D Ncye Ag Dspr Tools Max tool diameter 240 mm Additional Equipment Tools: Equipped with Stark Italia profile IV68/78/Al Write production lists on machine or external PC Programme modification via keyboard, floppy disk, or ON-LINE connection Compatible with "window production" programmes Sequence and series working programmes CNC electronic positioning with 999 memorisable positions per spindle Automatic motor start/stop and electronic spindle motor brake Troubleshooting via monitor This SAC F300 was manufactured in 2006. A robust woodworking machine, it's ideal for various wood processing tasks. Contact us for more information. Application Types Other Woodworking Machinery

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) Fodpfxex Eabps Ag Djpr • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 Fpodpfx Aex D Uqcjg Djr spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Year of construction: 2009, condition: ready for operation (used), Main Drive Spindle speed range 6000–18000 rpm Fedpfx Aex D Nddjg Depr Number of axis 3 Additional Equipment Roller infeed table Upper pressure table Lower pressure table Upper and lower working units Belt outfeed conveyor (right side) Electronic thickness control Automatic central lubrication CNC control system: XP 600 with Soft CN Safety system This 3-axis BIESSE SKIPPER 100 CNC processing centre was manufactured in 2009. Ideal for versatile CNC machining, it offers robust construction and precision. Consider the opportunity to buy this BIESSE SKIPPER 100 CNC processing centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Fedpsx D Tycjfx Ag Dopr Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 770 Measurements depth 2045 Measurements height 2030 Machine weight 3150 Main Drive Punching force 115 tons Main motor power 11 kw Additional Equipment Dual-cylinder hydraulic system Easily interchangeable punching tool One set of punching tools included Angle cutting shear Flat bar shear Notching tool Rod cutting tool 1000 mm electronic back gauge Foot pedal with emergency stop on both sides Delivered with one set of Ø26 mm punch and die This HILALSAN HKM-115 was manufactured in 2022. A robust hydraulic shearing machine, it's ideal for those looking to get high-quality shearing capabilities. Contact us for more information. Application Types Shearing Fpjdpfox D Skgox Ag Djr

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Fjdpex D Sr Defx Ag Dspr Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Year of construction: 2018, operating hours: 800 h, condition: ready for operation (used), General Data Measurements width 4715 mm Measurements depth 7750 mm Measurements height 3700 mm Machine weight 22500 kg Control Unit Brand FANUC Model 31iMB Main Drive Spindle speed range 35–3000 rpm Spindle motor power 15/18.5 kW Tool taper ISO 50 Wire diameter 150 mm Movement X-Axis Movement 2200 Y-Axis Movement 1600 Fpsdpfx Agjx D Slke Dsr Z-Axis Movement 1600 W-Axis Movement 550 mm B-Axis Movement 0.001° Table Outer length 1250 mm Outer width 1500 mm Table load 5000 kg Additional Equipment Tool Changer Type: Arm type / Tool Positions: 60 / Max Tool Diameter: Ø125 mm / Max Tool Length: 300 mm / Max Tool Weight: 25 kg / Tool Change Time: 9 seconds Standard Accessories: Fanuc 0i CNC control, spindle oil cooler, chip conveyor, high-pressure cooling system (30 bar), hydraulic system and central lubrication, electronic handwheel, workspace lighting, spindle vibration monitoring Optional Features: 0.001° table indexing, 3D Fanuc option for universal milling head This 5-axis MICROCUT HBM-4 boring machine was manufactured in 2018. It features a robust Meehanite cast iron structure, high spindle speeds with low vibration, and a Fanuc 31iMB control for precision. The spindle supports a 150 mm diameter and operates at speeds up to 3000 rpm. The table can handle loads up to 5000 kg, with a working area of 1250 x 1500 mm. If you are looking to get high-quality boring capabilities, consider the MICROCUT HBM-4 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2008, condition: ready for operation (used), Main Drive Spindle speed range 2410 Fpsdpfx Agex D H Elj Dsr Number of axis 2 Additional Equipment Integral protective hood around cutting area Mobile head roller table (3 m) This SCHÜCO PDG e-Cut 600 was manufactured in 2008. It features tungsten carbide sawblades Ø600 mm, three-phase motors 4 kW at 2800 rpm, and blade rotation speed of 2410 rpm. The machine includes electronic control for head tilting, mobile head with automatic positioning, and is set up for chips and fumes extraction. Consider the opportunity to buy this SCHÜCO PDG e-Cut 600 Optimizing Cross-Cut Saw. Contact us for further details regarding this machine. Application Types Sawing (Wood)

Year of construction: 2007, condition: ready for operation (used), Control Unit Fsdpfx Agex D E Sko Dspr Brand SIEMENS Model SIEMENS 840D Additional Equipment Siemens Path Control SINUMERIK 840 D, featuring 5 axes, 1 spindle, electronic gear, and integrated safety functions Motorized Milling Heads for internal and external gears with a swivel range of degrees External Gears: Min. Diameter: 950 mm / Max. Diameter: 2800 mm Cutter Arbor Cone: HSK-B160 (Hollow Shank Taper According to DIN 69063) This 5-axis CNC milling machine manufactured in 2007 features a Siemens SINUMERIK 840 D controller with electronic gear and integrated safety functions. It can handle workpieces up to 2800 mm in diameter and offers motorized milling heads with a swivel range of / degrees. Ideal for both internal and external gears, consider the opportunity to buy this Gleason Pfauter P 2800 CNC milling machine. Contact us for more information about this machine. Application Types Other Machine Tools