Used Electric Wheelchair for sale (28,433)

Condition: good (used), Auxiliary switch, line switch, circuit breaker, load breaker, load disconnector, motor protection switch, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch Dcodpfxox R Sxgj Afnsb -Manufacturer: Schneider Electric, circuit breaker switch disconnector -Type: NSX 400-630 F/N/H/NA -Rotary drive: with extension -Transport dimensions: 420/240/H200 mm -Weight: 7.7 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Dsdjwptfrepfx Afnjcb Fuel Type: Natural Gas Electrical Output: 2,433 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump + filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release Dcedpfjxv D Hqex Afnjb The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Dsdou Ur Raepfx Afnscb

Condition: ready for operation (used), Sasaki Electric Patlite GSE-09TLY-K Signal Display , serial no. according to photo ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dcsdpfoi Ec E Iex Afnob

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm Dcodpfx Afsx D Iv Sjnsb This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece Dcedpjd Iqqisfx Afnob -Weight: 6.8 kg

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 Dcodpfx Afoxv Dywjnjb The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: ready for operation (used), Schneider Electric / Berger Lahr BDM7744HAA00 Servo motor ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dedpfxji D Nvko Afnscb

Condition: excellent (used), Year of construction: 2016, Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump, high-pressure centrifugal pump, vertical pump Dsdpfxext Epbo Afnecb -Condition: unused -Manufacturer: E-Tech Franklin Electric, Vertical pump type EV15/05 FII040 T E1 IE3 -Motor: AEG 4.0 kW -Flow rate: 8 - 24 m³/h -Pumping height: 28.3 - 72.5 m -pmax: 25 bar/120°C -Pipe connection Ø 50 mm see photos -Dimensions: 300/250/H870 mm -Weight: 52.8 kg

Condition: new, Schneider Electric LXM62DU60C21000 servo drive including accessory set SN:2710131668, unused in opened original packaging, 100% functional, scope of delivery as per photos Dodpfjpf Ar Aox Afnjcb

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension Dcsdpfjff H Ncjx Afneb -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Dcodpjxaigwsfx Afneb

Condition: good (used), PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Dimensions: 110/105/H75 mm Dsdpexufdzefx Afnocb -Weight: 0.4 kg

Condition: ready for operation (used), Fuji Electric GGG 3226 A engine SN: M6091630Y2 with TG-21 tachometer generator, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcedpfx Aevxymisfneb

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm Dodpfx Aouqq Nzjfnocb -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

Condition: ready for operation (used), Schneider Electric XBTGT5330 10.4" Color Touch Panel SN:085960E0240371, the article was only used for test purposes, new condition, 100% functional, scope of delivery as per photos Dodpopf Ar Rsfx Afnjcb

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Dcsdsx Hwahjpfx Afnsb -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-SX -Welding power: max. 270 A -ground cable -Dimensions: 600/300/H390 mm -Weight: 31 kg

Condition: ready for operation (used), Schneider Electric LXM62DU60C21000 Servo drive SN:2710072445 , the article was only used for test purposes,mint condition, 100% functional, scope of delivery according to photos Dodpspf Arxjfx Afnocb

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-S -Welding power: max. 270 A -ground cable -Dimensions: 485/280/H390 mm -Weight: 20.1 kg Dcodpfex Hv Nzsx Afneb

Condition: ready for operation (used), Lenze / Schneider Electric SX-1/21/0/2/8 m LED L1 card 51130049 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dcsdpopf Aq Tefx Afnob

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm Dcsdpfxsx Hvyye Afnob -Weight: 16.5 kg

Condition: ready for operation (used), Fuji Electric MPF 1114 G 3-Phase Induction Motor , Serial No. according to photo , Hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 28 mm ,used, normal signs of wear, 100% functional, Scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcedsi D H Trspfx Afnob

Condition: new, Schneider Electric XBTGT5330 10.4" Color Touch Panel TFT / Magelis Advanced Panel SN:085960E025714, unused in opened original packaging, 100% functional, scope of delivery as per photos Djdpfxspf Atcs Afnocb

Condition: ready for operation (used), Fuji Electric MPF 1138 A 3-Phase Induction Motor , Serial No. according to photo , Hole spacing of mounting holes: 215 x 180 mm, Ø drive shaft: 48 mm ,used, strong traces of use, 100% functional, Scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpfx Afsi D H Tvenecb