Used Edgebander Edgebander for sale (818)

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Nwodpoy Hq Nvefx Ad Ssh

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Nsdpfx Aox A Th Dod Sowh Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Nwjdjzcau Eopfx Ad Ssh Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Nsdpfx Adjy Nxgnj Sowh Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Nwjdpfx Ajzb Iuqod Sjh Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N Nedpfszb Iggjx Ad Sowh SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: excellent (used), Felder TEMPORA F800 Edge Bander Liquids Pre-milling cutters, Glue application via roller, Replaceable tank Pneumatic pre-trimming guillotine Liquids Final trimming blades Nodozdtlxopfx Ad Sewh Up-and-down milling unit Corner rounding unit, Profile scraper Cleaning liquids Flat scraper, Polishing unit, The machine features NC control Max. element height 60 mm, Max. veneer thickness in roll 3 mm, Feed rate 12 and 20 m/min Central lubrication In my opinion, the technical condition is very good. Year - 2019 Inspection and testing on-site is possible. Purchase via leasing is possible.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Release agent application device Grinding unit Infrared preheating zone Gluing system Edge pressing unit Edge trimming unit Radius milling unit Rounding unit Edge scraping unit Glue scraping unit Cleaning device Brush unit Nwedpozdpqqefx Ad Seh Hot air blower or hairdryer Approximate weight: 2775 kg Only 1653 operating hours Available in October 2026

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRANDT KDF 1630 PROFI LINE EDGEBANDING MACHINE FOR SALE IN USED, GOOD CONDITION! Nwjdpjzdnp Sofx Ad Sjh FULLY FUNCTIONAL!

Condition: used, machine/vehicle number: 008522, Position 1: Robot HOMAG + KUKA-KFL10 + KR Nwjdpfjy Nx U Ejx Ad Ssh Position 2: Single Edgebanders HOMAG + KUKA-KFL10 + KR Position 3: Robot HOMAG + KUKA-KFL10 + KR Position 4: Panel Return Systems HOMAG + KUKA-KFL10 + KR

Condition: good (used), Equipment: CE marking, SCM CU 410 K Combination Universal Machine – 5-in-1 combination / panel saw / router / jointer / planer / mortising machine incl. feed system and various spare belts. For sale is a high-quality and extremely robust SCM CU 410 K universal combination machine manufactured in Italy. The machine combines the most important wood processing functions into a compact, professional unit and is ideal for carpentry shops, joineries, craft businesses, or demanding woodworkers. The CU 410 K offers the stability and precision of professional individual machines with a significantly smaller footprint. Features & technical data: Jointer/Planer: +Working width of jointer/planer: 410 mm +Total length of jointer tables: 2000 mm +Swiveling jointer fence: 90–45° +Tersa cutterblock with quick-change reversible knife system +Cutterblock speed: 5000 rpm +Max. feed height of planer: 240 mm +Feed rate of planer: 6 m/min Panel Saw: +Saw blade diameter: 300 mm +Scoring unit +Max. cutting height: 100 mm Sliding table: +Cutting length of sliding table: 700 mm +Parallel fence Routing unit: +Router spindle: 30 mm +Speeds: +3000 / 4500 / 6000 / 8000 / 10000 rpm +Max. tool diameter recessed under table: 160 mm +Stable router fence +Mortising device +Solid construction made of gray cast iron +Precise guide for demanding work Mortising table: +400 × 185 mm Nodozdiyrspfx Ad Sjwh +Travel distances: 130 / 140 / 150 mm Additional features: +Tenoning table +Dado frame with swivel runner +Large workpiece supports +Tersa cutterblock +Scorer +Solid gray cast iron construction +SCM professional quality – Made in Italy Dimensions & weight Shipping dimensions approx.: 2040 × 1500 × 1140 mm Weight: approx. 950 kg Due to its robust construction, the machine is particularly durable, runs smoothly, and is precise. An ideal machine for anyone looking for a high-quality combination machine with professional features. Inspection and test run possible by arrangement.

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm Nwsdpfezbyvaox Ad Ssh • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2010, machine/vehicle number: 0 - 251 - 20 - 4507, functionality: fully functional, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Nwedpexzp Uwofx Ad Ssh

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Nwedpfsx A Tk Sox Ad Soh Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Nwedpfx Adox Swdds Ssh Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Nwjdpeyqxx Sjfx Ad Ssh Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION

Condition: used, machine/vehicle number: 008247, Type of edging: Thin edge, Thick edge Nwjdpfxszbrn Us Ad Sjh Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008249, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Nwsdpfjzbrl Tex Ad Ssh Operating Units: 8 nr

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Njdpfx Adezbrn Ij Sswh Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Nwedpfx Ajx A Hbkjd Soh Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 12 nr Nedpfxowu Ab Ts Ad Sowh Operating Units Left Side: 12 nr

Condition: used, Year of construction: 2015, We are selling a Felder Perfect 710, complete with two additional cauldrons. Everything is in working order and ready for immediate use. Nwjdpfx Ajzc Ikhed Seh Included: Felder Perfect 710 2 additional cauldrons Please contact me for viewing, further information, or pictures.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a used BRANDT KDF 440 C edge banding machine from the HOMAG Group. Year of manufacture: 2017 Edge trimming unit Gluing unit Pressure zone Cutting unit (2-motor) Multi-stage trimming unit Profiling and corner copying unit (1-motor) Profile and flush trimming blade Jointing unit Feed rate: 14 m/min Nodpfx Adezc D D Dj Sjwh EVA & PUR compatible PowerTouch control system PU pressure rollers Few operating hours Available from June 2026 In very good condition.

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Nedpfx Adsy Emw He Sswh Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 8 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, with approximately 4000 m of operating time. Comes with a new machine warranty. The machine is sold without the illustrated return system. Min. workpiece width (mm): The minimum workpiece width varies depending on workpiece length, height, and surface quality: 70 Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm "e-motion" control system with an 18" touch-screen color display with integrated maintenance software and optional network connectivity Stable machine frame made of steel Extendable workpiece support makes it easier to work with large workpieces Motor-controlled positioning pressure beam with 2 offset arranged roller tracks for even pressure distribution on the workpiece Chain feed with a feed rate of 12 m/min & rubberized support pads for optimal grip on the workpiece Ball-bearing roller support plate with a diameter of 770 mm Infeed guide rail with sliding rollers for sensitive materials Edge milling unit with tool-controlled diamond milling cutters and 2 motors, each with 1.5 kW at 12000 rpm. Chip removal is motor-controlled and adjustable from 0–3 mm, incl. 2 diamond milling cutters Ø 80 mm H 49 mm Z2+2 Edge detection by means of an infrared sensor Shear cutting unit for pre-cutting thick PVC/ABS edge materials Nedozcymhjpfx Ad Sewh Teflon-coated gluing unit with a capacity of 1.5 kg, application by means of a finely adjustable gluing roller & quick-change system and heating cartridge monitoring (~ 250 m per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges Pneumatically tool-controlled gluing unit Motor-controlled positioning pressing unit with 1 large driven pressure roller and 2 conical counter-pressure rollers, pneumatically pre-tensioned Cutting saw unit with 2 independent motors, each with 0.50 kW at 12000 rpm, pneumatically swiveling 0–15° Multi-function milling unit for radius, flush and bevel milling of thin edges with 2 independent motors, each with 0.75 kW at 12000 rpm, motor-controlled positioning edge adjustment & pneumatic retraction function from the control panel Corner processing unit for soft-forming and post-forming workpieces for processing the end edges with edge thicknesses of 0.4–3.0 mm & workpiece heights of 10–60 mm 2-axis motor-controlled positioning radius drawing blade unit incl. pneumatic retraction function Polishing unit with 2 motors Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended infeed guide rail (+400 mm) 047 Edge milling cutter with replaceable cutting inserts 64 mm height instead of 49 mm, 2 motors with 2.2 kW instead of 1.5 kW each 051 Multi-function milling unit with vertical multiple feeler rollers for processing workpieces with pot-hole drills 053 Spray application of lubricant Pneumatic-mechanical infeed stop to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 067 Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges 050A Additional quick-change glue tank, counter-rotating 090 "classic" multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motorized adjustment and positioning for corner rounding milling cutter 085 Preparation for u-motion professional 086 Tool preparation R=1.