Used Driving Device for sale (28,820)

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of manufacture: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm - Pneumatic feed gripper (clamping gripper with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Steel base profile - Ball screw Ø 32 x 10 mm - pneumatic with position indicator - Permanent servo motor type: MKD071B-061-KP1-KN Gjdpfxsgi E Hae Ahvjtw (Part no.: 261989, p. no. MKD071-50234, brake with 24 V DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition possible drive controllers under stock no. 53628 and stock no. 53673

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC Gedowywi Aopfx Ahvjtw O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. Gedoh D Syvspfx Ahvstw The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency converter, drive controller for robots FANUC type A06B-6105-H003 No. V07Z08282 NEW / unused Godpfxokpwu Ro Ahvjtw Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Installed PCBs: A16B-2000-0063/07D, A16B-3200-0440/05C - Plexiglass cover not included in delivery Dimensions (W x H x D): 70 x 170 x 380 mm Weight: 16.5 kg As new / unused in opened original box from stock liquidation

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement Gedpfx Ahsdzqrtevjtw - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Gjdpfjdzql Sox Ahvetw Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Godpfx Aedzqc Ijhvstw Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet Gtjdpfx Ahsdz Spwovsw - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition Gtsdpfx Ahodzqccovsw

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Gtsdpfx Ahewhf Hfsvew 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Godpfx Ahopu R Ncjvotw Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Gtedpfx Ahjib D H Uevsw Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Static frequency inverter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Make No.: A2K 60229 0001 Rated power 500 kVA Type of current D Mains voltage 380 Volt Input frequency 50 Hz Input current 760 Amp. Type power input 760 Amp. Gtjdpfxohutxzs Ahvew Output voltage 380 Volt Output frequency 50 Hz Output current 760 Amp. Type power output 760 Amp. - Control unit GARBE LAHMEYER type AEB 60 Cabinet dimensions (W x H x D) 2250 x 800/900 x 2550 mm Transport dimension (W x H x D) 2430 x 1100 x 2700 mm Weight 1660 kg

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Gtedehbal Dspfx Ahvew Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Gtsdpfjharwyox Ahvow Weight approx. 800 kg good condition

Condition: used, Electronic crane scale MWT type 142 Make No.: 142571 Year of construction 1993 Tensile force measuring device, crane scale Measuring range: 2.500 to 80.000 kg Smallest measured value: 20 kg Power supply via 12 Volt accumulator - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare via remote control Gsdpfjg D H Riox Ahvstw - Memory for measured values (weights) - Printer for measured values very massive and high quality body made of steel own weight: approx. 200 kg

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle Gtjdpfx Ahodzqa Hevjw 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable Gedpfjfx Hxzsx Ahvotw - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement Gtodsgbpuhspfx Ahvsw - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp Godsfgpfmjpfx Ahvotw - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Gjdpfx Ahsf Axn Ajvetw Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Gsdeqv I S Sjpfx Ahvjtw Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Gjdpfx Ahedzqacevstw Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Gtsdpedzp U Aofx Ahvsw Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. Gtsdpfx Aod N E Rvehvew The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.