Used Drill Bit Feed for sale (16,225)

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm Fodpfx Aozuk Aisk Uspl - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, spindle mount: MK 4, drilling depth: 150 mm, total width: 500 mm, total length: 700 mm, overall weight: 290 kg, Equipment: documentation/manual, 3-phase 400V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Spindle RPM adjustable from 75 to 3010. Motor runs in both left and right directions. Spindle power downfeed. 8 feed rates adjustable from 0.004 to 0.30 mm/revolution. Adjustable drilling depth. Maximum drilling depth: 150mm MT4 spindle mount. Tool ejector. E-Off switch. Head and table are height-adjustable. Table size: 500x400mm Good overall condition. Fpsdpfx Ajzycqcsk Uol Made in Sweden. Year of manufacture: 2008 Weight: 290KG Overall dimensions: 70x50x180CM Contact us for shipping options! €2,850.00

Condition: ready for operation (used), Alzmetall AB 3 ESV Drill press, pillar drill Pinole stroke: approx. 170 mm Table: 620 mm x 480 mm Clamping area: 500 mm x 375 mm Infinitely variable speed: 55 - 1450 rpm / Pneumatic speed adjustment Feed rate: 0.1; 0.2; 0.3 Left/right rotation Drilling capacity in steel (Ø): approx. 30 mm Overhang (spindle to column/table): approx. 290 mm. You are welcome to visit us for an inspection. We would be happy to arrange an affordable shipping service for you! Fodpfezx Rnaex Ak Uspl You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm Fedpfx Akozwg Tio Uspl - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: ready for operation (used), Year of construction: 2012, WAGNER PRC 40 – Outrigger drilling machine / Radial drilling machine - Year of manufacture: 2012 - CE marking - COMPLETE TECHNICAL DATA – SEE PHOTO - Automatic feed - Morse taper MK 4 - Speed range: 25-2000 RPM - Coolant system - Rotary table - Documentation Dimensions: L x W x H 2.5 x 1.1 x 2.65 meters / Weight: 3500 kg Errors and omissions excepted. Fpsdpfx Akozi Av De Uel

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finishing cutter -Diameter: 25 mm Fjdpob A Rb Nefx Ak Uopl -Usable length: 55 mm -Corner radius: 3 mm -carbide-tipped Quantity: 8 pieces -Sale: only complete set -Weight: 4 kg

Condition: ready for operation (used), Fehlmann Picomax 50 drilling machine with threading unit Speed: 125 - 4400 RPM Fpjdpfx Ajzzvxijk Ujl Feed: 0.03 - 0.40 mm Drilling capacity in steel: 22 mm Threading unit Spindle stroke: 120 mm Stroke: 430 mm Accessories: see pictures You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finish cutter Fodpfx Akob A Hfne Uopl -Diameter: 32 mm -Usable length: 80 mm -Corner radius: 2 mm -Type: KHSS-E Quantity: 15 pieces -Sale: only complete set -Weight: 11 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Through-feed drilling machine, CNC controlled, with drilling heads on the right, left, 4 above, and 7 below. Fpedpfx Ajy U H R Esk Usl

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Fpsdexbn A Topfx Ak Usl Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 - Minimum speed: 20 RPM Fpjdpfxjzury Ne Ak Uel - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: Fpjdpewfhg Nefx Ak Usl - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Fpodpfx Aey Nd T Hjk Ujl Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: good (used), functionality: fully functional, spindle mount: MK 4, For sale is a pillar drill press from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB4-SV • Speed: approx. 60 - 765 rpm • Spindle stroke: approx. 180 mm • Feed speeds: 0.15 / 0.2 / 0.3 / 0.36 mm/rev • Table size: approx. 600 x 450 mm • With coolant pump • Connection: 16A CEE plug • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! Fpodpfjzqnuujx Ak Ujl You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 Quantity: 16 pieces -Sale: only complete set -Weight: 6.5 kg Fpsdeb A Srljpfx Ak Uol

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm Fpjdeb A Rbfepfx Ak Uol -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Condition: good (used), End mill, shank mill, milling cutter -Six-cutter -Roughing end mill -Various: Diameter -Type: HSS Fpjdpfxjb A Rips Ak Uol -Quantity: 11 pieces -Sale: only complete set -Weight: 6 kg

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. Fsdpeyy Rcpsfx Ak Uepl 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 06060408, Description Grass Flexi Press (2006) including accessories Due to the purchase of a CNC machine, this professional Grass Flexi Press hinge and fitting drilling machine is no longer needed. The machine has always been well-maintained, has undergone annual inspections, and is in excellent/good condition. Ready for immediate use in the workshop! Specifications & Details: Make/Model: Grass Flexi Press Fpsdpfx Akszrvauj Usl Year of manufacture: 2006 Condition: Well-maintained and annually inspected Includes: Various accessories / drill bits Reason for sale: No longer needed due to switching to CNC Interested or have questions? Please feel free to contact us for more information or to arrange a viewing of the machine.

Condition: good (used), Year of construction: 1975, machine/vehicle number: 620421, Offer 24461 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - Drill spindle stroke 160 mm - 9 drill spindle speeds 90 - 1450 rpm - throat depth 300 mm - Table with 2 T-slots + attached machine vice - Table dimensions 400 x 450 mm - Max. distance table - drill spindle 660 mm - Height adjustable via rack and pinion with hand crank Fjdpfx Akju Atnlj Uepl - Drive 400 V / 1.2 kW - Space requirement approx. W 600 x H 2100 x D 850 mm - Weight approx. 300 kg - with: - Drill chuck - 10 pcs. HSS drill bits 8 - 20 mm

Condition: excellent (used), functionality: fully functional, Deep Hole Drilling Unit / Deep Hole Drill Manufacturer: POREBA Type: Deep Hole Drilling Attachment / Drilling Rig Condition: Used, good technical condition Technical Data Feed stroke: up to 900 mm Weight: approx. 780 kg Electrically driven feed system Heavy-duty industrial construction Integrated control panel Complete unit with drive motors Description Offered for sale is a robust deep hole drilling unit manufactured by POREBA. The attachment is suitable for installation on large conventional lathes or special-purpose machine tools and features an electrically driven feed system with a travel of up to 900 mm. Its rigid construction provides excellent stability and precision during deep hole drilling operations. The unit is supplied complete with drive motors, control panel, and mounting components visible in the photographs. Advantages ✔ Heavy-duty industrial design ✔ Feed travel up to 900 mm ✔ High rigidity and stability ✔ Electrically driven feed system ✔ Suitable for deep hole drilling applications ✔ Proven POREBA engineering Transport Fpodpfx Aszcvuusk Uol Approximate weight: 780 kg Loading assistance available

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Fpedpezza Nxefx Ak Uel Machine light Spindle guard

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Fjdpfx Aeztdz Aek Uepl Errors and omissions excepted.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. Fpedpfezb El Hox Ak Usl 5 drilling machines in stock, sold individually.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Fsdpfx Ajylp Slsk Ujpl Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.