Used Drill Bit Feed for sale (19,481)

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Nodpfjxd Tqbex Af Eolh Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: good (used), Core bit, step chisel, core bit for well construction, core drill, core drilling machine, diamond core bit, core bit for well drilling machine -Drill bit: diamond core bit Ø 142 mm Nedpfsxd Sd Hex Af Eolh -Hole: Ø 125 mm -Dimensions: see photos -Dimensions: Ø 142 x 175 mm -Weight: 3.9 kg

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Nodpfxsxiza Uj Af Eolh

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm 3 pieces 10,4 x 250 mm 1 piece 1 x 11 x 350 mm 1 piece 11 x 270 mm Nledpfx Ajhl Awdof Ejh Weight 1,5 kg

Condition: used, Year of construction: 1989, drilling capacity: 40 mm, quill stroke: 200 mm, throat depth: 800 mm, ★ TOP maintained machine from the liquidation of a well-known toolmaker - also check out our other listings★ ★ Rapid Radial Drilling Machine DONAU DR 40 DIGI with accessories ★ Year of manufacture: 1989 Machine number: 1164-1 Condition: Not tested Delivery terms: Free loaded on truck - unpackaged Location: 73347 Mühlhausen Availability: Early December 2025 - Items must be collected by the buyer in week 49/2025. The exact date will be specified by us. Earlier availability may be possible by arrangement. Payment terms: Advance payment - via bank transfer Internal no.: JO9 Available for inspection under power: YES ⚙️Technical Data Speed range: 35 - 1800 rpm Automatic feed Thread cutting capacity: M33 (M45) Nlsdjxiy Scepfx Af Esh Max. drilling capacity: 40 mm (50 mm) Drill spindle taper: MK 4 Arm length: 800 mm Table height: 800 mm Table dimensions: 1200 x 600 mm Drill spindle travel: 200 mm (max. drilling depth) Motorized spindle head vertical adjustment (450 mm) Coolant system Digital display (programmable) Further technical details in the pictures Scope of delivery Available manuals Vice - jaw width 200 mm Angle plate Accessory cabinet and accessories as per pictures Dimensions & Weights Installation dimensions (L x W x H) approx.: 2200 x 1300 x 2800 mm Weight approx.: 2000 kg If you have any questions or would like to arrange a viewing, feel free to contact us. ⚠️Also check out our other listings⚠️ Additional notes: ►We expressly recommend collection by direct transport (freight forwarder) ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale exclusively to traders❗

Condition: new, Year of construction: 2025, The CORMAK WS32 table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32 bench drill: High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm Nljdsrif Udepfx Af Eoh SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 280, 400, 675, 1140, 1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm Optional equipment cooling system

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Nsdpfx Afjxd Tpqj Eolh Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: excellent (used), CATALOG NO. 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between outer spindles: 610 mm - Spindle spacing: 32 mm - Feed cylinder stroke: 60 mm - Max. length of workpiece: 3,400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, mounted on thread (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6–8 bar Njdpfxogq I I Ee Af Ejlh - Dimensions L/W/H: 4600×1180×2200 mm - Weight approx. 1,500 kg Net price: 12,900 PLN Net price: 3,040 EUR depending on exchange rate, 4.25 EUR (Prices may vary with larger fluctuations)

Condition: new, Year of construction: 2025, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Motor 220V, 1300W, Speed 0-2600 rpm stepless Nledpsbc Sa Djfx Af Esh Standard clamping range Ø 30 - 250 mm Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: excellent (used), Simodrive feed model Make Siemens Type 6 SC 6116 OAAOO G 600 D 490 / 49 M6 REQ Output current 60/120 A Space requirement :D. 290 x W.150 x H.480 mm Nodpfx Asfhkt Rjf Eslh Weight 13 kg

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm Nlodpfxoxivhas Af Eoh 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: new, Year of construction: 2025, The WS16 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 16mm MAX. THREADING DIAMETER IN STEEL M10 COLUMN DIAMETER 70mm SPINDLE TRAVEL 100mm SPINDLE-COLUMN DISTANCE 193mm MAX. SPINDLE-TABLE DISTANCE 330mm MAX. SPINDLE-BASE DISTANCE 613mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 480-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 265 x 285 mm Nlodpferif S Rsx Af Esh BASE DIMENSIONS 360 x 480 mm MACHINE HEIGHT 1130mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 131.5 kg DIMENSIONS 600 x 400 x 1150 mm Optional equipment cooling system

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Nlsdpfx Aexd Tknjf Esh Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: good (used), functionality: fully functional, Data --- Nodpfx Afoxdu H Ro Eolh Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- 18 speeds 35 - 1,800 rpm --- 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- ----

Year of construction: 1999, condition: excellent (used), - 0.8 kW engine - 400 V power supply - 3 spindles - drilling depth adjustment - pneumatic spindle stroke - integrated blowing on the drilling site Nlsdpfoidmu Rjx Af Esh - two pneumatic clamps

Condition: used, Drill sleeve MK 4 Nledsb Tyqaspfx Af Ejh Length 170 mm Diameter 63 mm

Condition: excellent (used), Band width: max. 400 mm Band thickness: 0.5 - 4.0 mm Cross-section: 1,000 mm² Nsdpfx Afsxg Rlzs Eelh Upper roller pneumatically liftable Large roller basket at infeed Side band guide with right/left spindle With mounting plate for installation on the press body The feeder receives a completely new press control as a desktop unit upon order

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,650 mm, table load: 6,000 kg, spindle diameter: 125 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,000 rpm, table length: 1,400 mm, table width: 1,525 mm, feed length W-axis: 800 mm, overall weight: 18,000 kg, 1 used table-type boring mill Manufacturer: JUARISTI Model: MDR 125 Year of manufacture: 1986 Control: Heidenhain TNC 155 Table size: 1525 x 1,400 mm Table rotation: 360 degrees Travels X-Y-Z-W: 2,000-1,500-1,650-800 mm Spindle mount: SK 50 Speed range: 7 - 1000 rpm Feed: 0 - 2000 mm/min Rapid traverse: 5,000 mm/min Table rotation: 1 rpm Power connection: 30 kW Weight: 18,000 kg Control cabinet: 2,500 x 750 x 1,700 mm A large quantity of tooling can be purchased additionally. As a rule, the machine is sold without accessories. Nsdsxg Imiepfx Af Ejlh

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB Nledpfx Afsxdh Hqo Esh • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: good (used), Year of construction: 1954, Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev Nededi Smkopfx Af Eslh -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Nljdpenccx Hjfx Af Eeh

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Nlsdpeupxh Nefx Af Eoh Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Nodjxddwrspfx Af Eolh Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg Nsdpoupxkwjfx Af Ejlh dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. Nedjvn U Adjpfx Af Eelh comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"