Used Double Spindle Lathe for sale (25,195)

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on It is included barfeeder. Dodpfxjxz R Ilo Ab Tjcr

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: Dcjdpfx Aevutyheb Tsr MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: like new (used), Year of construction: 2024, – Distance between centers: 1000 mm – Swing over bed: 358 mm – Swing over cross slide: 502 mm – Swing over support: 179 mm – Spindle bore: 52 mm – 30/2300 rpm Dcsdpfjxz Rg Uex Ab Tsr – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes (2-axis DRO) – Brake – Cooling – Multifix with 4 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Dcedpfxexyh Ndj Ab Tsr Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle Dsdepq R Rdepfx Ab Tecr - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Dcodoxz Edzspfx Ab Ter

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007 with CE mark 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Compound slide length: 410 mm Compound slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance spindle centre – compound slide: 34 mm Compound slide (support) swivel range: 60 / 120° Main spindle: Dsdpfx Abexx S R As Tocr Spindle mount: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 - 3,000 rpm Infinitely variable speed adjustment Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible workpiece weight (between centers, unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer - Emergency stop button - Digital speed display on control panel next to digital readout - 3-jaw chuck - MULTIFIX tool post, size B - Electrically interlocked chuck guard - Quick-action collet chuck - MICROJET coolant spray unit - Chip guard rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility Available from March 2026

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Djdjxzu Ipepfx Ab Tocr

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Dodpew E D Rqsfx Ab Tocr

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works Dcedpfxoxzdlko Ab Tsr

Condition: good (used), Lead screw lathe Mondiale Galic 16 Year of manufacture 1974 Distance between centers: 1000 mm Height of centers: 200 mm 40 – 2000 rpm Geometrically revised 4 years ago 3-axis digital display Multifix B with 5 cassettes Dcedjvzx Hgjpfx Ab Ter Coolant device Steady rest

Condition: good (used), L+Z lathe ERNAULT-SOMUA Cholet 435 Dcjdpfxexy Uave Ab Tsr

Condition: good (used), WEILER Precision Lathe MADADOR with HEIDENHAIN 3-Axis Digital Readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 size 5 Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill travel: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data not binding! Robust lead and feed screw lathe for workshops and advanced DIY users Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN - Lever-operated quick-collet chuck system - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/rear splash guard - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: Dsdpfxexx S Hde Ab Tscr - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: good (used), Year of construction: 1998, functionality: fully functional, TOS Galanta SUIL 40A – Lead and feed screw lathe For sale is a well-maintained, mechanically overhauled (2009) lead and feed screw lathe, TOS Galanta SUIL 40A, year of manufacture 1998. Technical Data Manufacturer: TOS Model: Galanta SUIL 40A Dcsdpfoxy R Hxox Ab Tor Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1,620 kg Main drive: 5.5 kW Max. spindle speed: 3,150 rpm Spindle bore: 50.2 mm Distance between centers: 1,000 mm Center height: 200 mm Swing over bed: 400 mm Condition: ready for operation (used) Included accessories Three-jaw chuck Tailstock Steady rest Coolant system Change gear set Operating manual (German) The machine is fully functional. Inspection possible by appointment.

Condition: good (used), turning diameter over cross slide: 175 mm, turning diameter over bed slide: 310 mm, – Centre distance: 750 mm – Swing diameter over bed: 310 mm – Swing diameter over cross slide: 175 mm – Spindle bore: 32 mm – Speed range: 65–2200 rpm – Infinitely variable speed control – Digital speed display – Longitudinal and cross feed – Digital readout (DRO) – Brake – Coolant system – Tool equipment – Lighting – Safety cover – Emergency stop Dcedpexy Ry Ejfx Ab Ter – Documentation – 400V

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Dcsdpfxjxy N S Hs Ab Ter Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Machine Equipment / Highlights Heidenhain ND 780 digital position display Röhm 3-jaw chuck, Ø 250 mm Dcedoxqpwkjpfx Ab Tor Multifix quick-change tool holder Coolant system for efficient machining Chuck guard for increased safety Chip guard rear wall for a clean working environment Year of manufacture: 1981

Condition: new, Year of construction: 2023, functionality: fully functional, NEW PLANT / READY FOR OPERATION / IMMEDIATELY AVAILABLE HT 45 SM2 / SIEMENS - with driven tools CNC lathe for the complete machining of turned and milled parts with 2 spindles, 2 tool systems, 5 linear axes and 2 rotary axes, integrated spindle motors on main and counter and counter spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 - 7000min-1 Counter spindle 0 - 7000min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45mm) Counter spindle: KK5 Includes: - Hollow clamping cylinder on the main spindle - Draw tube for main and counter spindle - Mechanical spindle brake (main/counter spindle) - Part ejector and flushing through the counter spindle - Control Sinumerik 840D-sl / OPERATE o emcoNNECT/APP-based user interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN dialogue programming o USB interface o Network drive / Ethernet o 3D simulation o and much more - 2x 12-fold tool turret VDI 25 radial with directional logic for up to 2x 12 driven tool stations Swivel speed adjustable with feed switch! Performance data: -Max. 4kW at 2080 rpm -Torque constant 16 Nm -speed range 0-6000 rpm -C-axis for main and counter spindle -TRANSMIT software for simple C-axis programming - Chip conveyor with an ejection height of 1100mm programmable Type "hinged belt" ) - Coolant device integrated in the chip conveyor 2 pcs. High pressure pumps with 14 bar 2 pcs. flushing pumps with 3,7 bar Air gun with spiral hose Dcedpfjlxqf Nex Ab Tsr - LED machine room light - Hydraulic power unit - Documentation

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Dedpju Uh U Ijfx Ab Tjcr

Condition: used, Schütte multi-spindle automatic lathe Dcsdpfjrrgqwsx Ab Ter SF81 year of construction 1987 incl. thread cutting gear Tapping spindle Pick-up device Balluff cam switch unit

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Dcjdpfx Asxy N Sysb Ter Tool holder Coolant system Price: Euro 2,500.— plus VAT, ex-site.

Condition: excellent (used), Year of construction: 2012, CNC - 2 Spindle Horizontal Machining Centre, second-hand Immediately available / ready for operation Manufacturer: Schwäbische Werkzeugmaschinen - Schramberg, Germany Typ: SW BA 322 / Siemen 840 D sl: auf Windows basis und Power Line Servoantriebstechnik Year of construction: 12 / 2012 Dcsdpfx Aolxp Ufsb Tor Axes: X 300 mm; Y 450 mm; Z 375 mm Work spindle: HSK 63 1-10.000 rpm. 25kW at 4,200 rpm. internal coolant supply 40 bar Tool magazine: Pick-up system; capacity 40 (2x20) tool places Workpiece holder; swivel carrier system Q - axis; Two independent swivel axes A - and U - axes Workpiece clamping hydraulics, workpiece support control Coolant system: 1,200 l; paper belt filter, cartridge filter, heat exchanger, high-pressure pump Chip conveyor: Scraper belt conveyor with lifting pump, ejection height 1,100 mm Automatic loading door Automatic rinsing cycle, manual spray gun Machine condition: cleaned, filled with necessary medium in clean condition and is in working order The machine has been checked by SW Maschinen-Service and can be inspected at any time by appointment. Delivery: by arrangement, free loaded ex works, subject to prior sale

Condition: not inspected (used), Year of construction: 1991, Schütte multi-spindle automatic lathe SF 32-6 DNT Project No.: Year: 1991 6-spindle bar automatic lathe DNT version (with servo drive for cycle time and speed) max. bar passage 32.0 mm for bars up to 3.30 m Dcodorrgqzspfx Ab Tjr incl. bar guide and stand - 1 set of cams for cross slides - 1 set of cams for longitudinal slides - part pick-off device - additional feed on stations 2 and 4 - thread cutting gearbox - thread rolling unit with Fette T 27 thread rolling head - rotating drilling unit for off-center drilling - quick drilling, reaming, and thread cutting spindle - drive for polygon turning and thread milling unit - Balluff cam switchgear - Woerle plain text display - Siemens PLC with plain text display - 2 swivelling control panels - chip flushing box

Condition: good (used), Year of construction: 1989, Schuette multi-spindle automatic lathe Schuette SF 20-6 Cam-controlled Number of spindles: 6 with mechanical gearbox Max. bar diameter: round 20 mm SW 17 mm AK 18 mm VK 14 mm Dcsdpfxsrrgqde Ab Ter max. bar feed: 80 /(160) mm Number of independent longitudinal slides: 6 Total / working travel (standard): 63/40 mm " " (special) up to: 100/63 mm Number of independent cross slides: 6 Total / working travel Middle and top slide up to: 32/20 mm Bottom slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max: 0.36/150 sec. Secondary times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd range: 355-2000 rpm Rated power of the drive motor: 15 KW Connected load: 50 kVA Speed of the drive motor: 1500 rpm Length * Width (in standard version) 3705 * 1320 mm incl. rod guide (in standard version) 6335 mm weight without bar guide and accessories approx.: 4.6 to. of the rod guide approx.: 0.5 to. total without accessories approx. 5.1 to. (all data according to manufacturer) Equipment: Pick-up device with backward processing Thread cutting gear with electric clutch thread cutting spindle additional longitudinal slides on position: 1,2+4,5 cutter chute hydraulic parts catcher in Pos 6 Kraft and Bauer C02 snow blower (out of operation) electric: Siemens S 5 control cam switch unit: Balluf Separate control panel on the operating side and rear side Woerle plain text display electrically prepared for bar loader ( n) other: prepared for decentralized oil mist separator Machine is under power in our sales room !

Condition: good (used), Year of construction: 1991, Schuette multi-spindle automatic lathe 6-spindle lathe Dcjdpfxsrrgpys Ab Ter with mechanical gearbox - Thread cutting gear - pick-up device - Back machining - Bar feeder - bar guide etc. can be viewed under power !!!