Used Double Side Tenonner for sale (25,631)

Year of construction: 2026, condition: new, planing width 405 mm Hedeyk Ibpopfx Amyer total power requirement 15 kW Weight 1900 kg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Weight 2500 kg Total power requirement 45,8 kw Hedpjvz Evhefx Amyor

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2650x950x1850 mm Hodpfx Aovz Ewromyer Weight 2100 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x900x1700 mm Weight 1900 kg Total power requirement 15 kw Hsdpfx Amevz Ezqoysr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x1100x1720 mm Hjdpjvz El Aefx Amyer Weight 2500 kg Total power requirement 19,5 kw

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW Hedpod Ixbcsfx Amyer space needed: 530 x 400 x 1180 mm weight:

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Hedpfx Aeyvz U Iomyjr Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Hodpjyvz Stefx Amysr Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Hjdpjyvkukjfx Amyer Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561 Hsdpfx Aoyttrxemyjr

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Hjdpsu Ekbnofx Amysr Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hsdpfx Ameunrwnjysr Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Hodpfxelikydj Amysr Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Hsdpfx Amoifnxxoysr Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Hedpfsyq Avhox Amyer Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Hjdpfx Aeyyxc Rjmyjr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Hedpfxetut Dxe Amyer Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Condition: good (used), Year of construction: 2000, Offer 25521 Double-sided long goods – cantilever racking without contents Technical specifications: - 2 pieces of double-sided cantilever racking, each consisting of Hodpfsx R Si Eex Amysr - 5 uprights with boltless system, height-adjustable storage arms - Length per rack approx. 4150 mm - Total length approx. 9300 mm - 130 storage arms - Upright height each approx. 6000 mm - Width of upright + support arms approx. 1700 mm - Max. arm load approx. 400 kg - Max. load per upright approx. 5000 kg - Axle distance between rack sections connected with diagonals approx. 1.0 m - Increment for arm height adjustment 125 mm - Arm dimensions L 700 x W 90 x H 70 mm - Upright dimensions W 250 x H 100 mm - Weight per upright approx. 400 kg - Weight per arm approx. 10 kg

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Hjdjyt Hkuspfx Amyjr

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Hedsxf Ut Hspfx Amyer Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Hodpfx Asx Upt Aomyor Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 200 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Hjdpfx Aoxxavtomyor Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Hedeuggpzspfx Amyor Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Hjdpfxjx Ig Hme Amyjr Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: not inspected (used), Maximum working length: 1500 mm Tilting capacity of heads: from −10∘ to +45∘ Hsdpfx Aexz Um Semyjr Swivelling capacity of heads: from −10∘ to +90∘ Motor power, machining unit: 2×2.25 kW (3 HP) Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Saw/drill rotational speed: approx. 3000 rpm CONDITION UNKNOWN – NOT TESTED