Used Double Shaft Shredder for sale (16,262)

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Lrodpfx Afex Uz N Asajk Technical Data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of manufacture: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper volume: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Material: Wood, cardboard, plastic Accessories: Hopper Note: The shredder is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video is available on our website or YouTube channel. Viewing, including powered demonstrations, is possible by prior arrangement at any time. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing by appointment only. Sale is ex works with prepayment, without warranty or guarantee.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Lodpfox Uz Npex Afajrk Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm screen 15 mm container with opening sensor Lrodpfx Aoyhdm Ajfask CE marking technical documentation year of manufacture 1996

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Lsdpfx Aexwdiujfajrk Motor output 90 kW Throughput capacity approx. 5 tons per hour (depending on material) System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: refurbished (used), Year of construction: 1997, operating hours: 33,328 h, functionality: fully functional, machine/vehicle number: W12599 Nr.563, overall weight: 9,500 kg, number of blades: 104, total length: 4,520 mm, total height: 2,400 mm, rotor length: 1,500 mm, power: 75 kW (101.97 HP), input voltage: 400 V, We offer this refurbished LINDNER Micromat MS 2000 single shaft shredder, year of construction 1997. manufacturer: LINDNER model: Micromat MS 2000 Ljdpfx Afeygvc Toaork year of construction: 1997 condition: refurbished category ID: 2097 type ID: 2590 type: single shaft shredder If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 Lrjdoygnk Aspfx Afask - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: like new (used), Maximum unit spacing: 340 cm Two motors, each 1.1 kW Ljdpfx Afevtpqgjaerk Cutting angle adjustment: -45 to +45 degrees Saw blade diameter: 300 mm Pneumatic clamps Option to cut with a single blade Control panel Year of manufacture: 2001

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor. Cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm. Subframe/base frame divided for transport purposes. Dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run available by appointment. Lredsv Hr Nxspfx Afaek

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The unit was dismantled from the production line and operated until the end. Regularly serviced, ready for operation. Ledpfx Afoya Uubjajrk

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Lrsdoya Hmiepfx Afaek Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: new, Year of construction: 2023, Vecoplan V-ECO 900, a plastic shredding machine with a capacity of up to 1,000 kg/h. The machine is brand new and in its original packaging. New, originally packaged Brand and model: Vecoplan V-ECO 900 Processable materials: All polymers Type: Shredder Brand: VECOPLAN V-ECO 900 Year of manufacture: 2023 Technical data: Rotor working width: 900 mm Rotor diameter: 370 mm Number of rotor knives: 42 (in standard configuration) Rotor speed: approx. 130 – 160 rpm Capacity: 400 to 1,200 kg/h – depending on material type, blower, and feed rate Drive power (ESC motor): Standard: 30 kW / 37 kW / 45 kW Feed opening: approx. 900 x 1,100 mm Machine weight: 5,200 kg Lodex U T Ahspfx Afaerk

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Lrodpfsx Urucox Afaek Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: used, Year of construction: 2006, Plastic Cutting Mill – Sales Offer High-performance industrial cutting mill designed for shredding plastics and plastic films. Front feeding system combined with a hinged feed hopper ensures comfortable and safe operation. A heavy-duty rotor with a precision knife system and screen provides efficient and uniform cutting. Ideal for recycling and production lines. Technical specifications: Lrsdpfx Afox Itzdeask Motor power: 35 kW Throughput: up to 600 kg/h Rotor diameter: 420 mm Rotor speed: 430 rpm Feed opening: 915 × 502 mm Max. input film width: 915 mm Rotary knives: 3 + 3 Fixed knives: 2 + 2 Screen hole diameter: 8 mm Drive system: 5 V-belts Material feeding: front feeding Feed hopper: hinged, manual tilt control Total machine weight: 1900 kg Robust design, high efficiency, ready for industrial operation.

Year of construction: 1984, condition: excellent (used), • Year 1984 • 2x55kW main engines • Max saw blade diameter 300 mm • Max cutting height 200 mm • Track width 350 mm Lrodelrxfqepfx Afask • Shaft length 430 mm • Shaft diameter 60 mm • Inverter feed

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Lsdpfx Afox Td Npsajrk Please feel free to contact us – we are happy to advise you.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Ledpfx Afswk Egweajrk Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. Ledpfxex Nkhqj Afajrk • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Lodjxrtt Eopfx Afasrk Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller Ljdpfx Aox I A Akjfasrk - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip for limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Condition: new, We would like to present you with an offer for Protechnika shafts dedicated to MRW 2.85 and MRW 2.10.10 machines: MRW 2.10.10: - 6-10-10 - 8-10-10 - 10-10-10 - Steel shafts - Side combs - Breaking bar MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 - Side combs - Breaking bars PROTECHNIKA is a company with 21 years of experience, actively engaged in the manufacture of spare parts and complete recycling lines from the very beginning of its operations. Lodpfx Aox Hx Hpefaerk In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. Through the implementation of automatic welding processes and our own proprietary production technology, we have been able to minimise production times while maintaining consistent, high quality. Grinding shafts are produced in series, which, among other benefits, enables us to partner with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welding personnel - ISO 9001:2015 - ISO 14001 - Independent design department able to meet any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are our top priority, because their satisfaction is our success!

Condition: new, We would like to offer you shafts designed for machines such as PRO.S1, MRW 2.65, MRW 2.75. - Paddle shafts - Concrete shafts - Star shafts - Trapezoidal shafts - Cassette shafts PROTECHNIKA is a company with 21 years of history that has specialized in the production of spare parts and complete recycling lines since its inception. In recent years, we have expanded our portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technology, we have minimized production times while ensuring consistent, high quality. Grinding shafts are a serial product, which, among other benefits, allows us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding processes / ISO 15613 / ISO 15614 - ISO 9606-1 qualified welders - ISO 9001:2015 - ISO 14001 Lredpfx Asx Hx Ersfaok - An independent design department capable of meeting any customer requirement - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of utmost importance to us, because their satisfaction is our success!

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 Lsdpfxsx Hhwde Afaork - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: new, Shredding Shafts for Hammel VB 950, Arjes VZ 950, Lindner U95, Pronar MRW 2.10.10, Olnova 95DK Available in all configurations with side combs and breaker bars: Lrodox Hhq Rspfx Afajk - 6-8-8 - 8-8-8 - 6-10-10 - 8-10-10 - 10-10-10 - 12-10-10 PROTECHNIKA is a company with a 21-year history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and our proprietary production technology, we have minimized production times while ensuring consistently high quality. Cutting shafts are a serial product, which allows us to collaborate with machine manufacturers as an OEM supplier. What sets PROTECHNIKA apart from the competition? It’s simple! - Certified 3.1 materials - TUV SUD Rheinland certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department able to meet all customer requirements - Our own Research and Development Center Customer relations are of paramount importance to us, as their satisfaction is our greatest success!

Condition: new, Shafts dedicated for IMPACTOR 250/850, COMPACTOR 300, EKOMAXX 800. Option to place orders including cassette and screen basket. - BETONWELLE - PADDLE - STAR (4-KNIFE, 6-KNIFE) - TRAPEZOIDAL PROTECHNIKA is a company with 21 years of experience, specializing from the outset in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and utilizing proprietary production technology, we have minimized production times while maintaining consistent, high quality. The production of cutting shafts is carried out serially, which among other benefits, enables us to collaborate with machinery manufacturers as an OEM partner. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 compliance - Automated welding process / ISO 15613 / ISO 15614 Lredjx Hhkqopfx Afaok - Welders qualified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department capable of meeting all customer requirements - Proprietary RESEARCH AND DEVELOPMENT CENTRE Customer relations are of the highest importance to us, because their satisfaction is our success!

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 Ljdpfx Afex Hhfzjaork - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are of paramount importance to us, because their satisfaction is our success!