Used Doosan Dx 420 Lc for sale (311)

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Dwjdpex Agxcefx Ab Tof

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Dwedpfx Abex Ad Nls Tef Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Dwsdpfeuxua Isx Ab Tef Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm Dwjdpfxjq Nqkxs Ab Tsf MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2012, CNC lathe with 2 axes DMC Korea DL22 Dedpfx Abexyauls Tjwf Fanuc OiTD with Manual Guide and USB port Year 2012 8-inch chuck Spindle bore 65 mm Turning length 400 mm 12-position turret Tailstock Tray with coolant pump

Condition: used, Year of construction: 2018, As good as new DOOSAN DNM4500 Dwsdpfx Aoxuagqeb Tsf including tool holders Control: Heidenhain iTNC640 Travel: X-800 mm, Y-450 mm, Z-510 mm max. table load: 600 kg clamping surface: 1000 x 450 mm Spindle speed: max. 12,000 rpm tool holder: BT40 tool magazine: 30 seats chip conveyor: . electric handwheel: Heidenhain

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received. Dwsdjvri I Ajpfx Ab Tef

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment. Dwjdoxxpaujpfx Ab Tjf

Condition: used, Year of construction: 2013, Doosan Puma 480 Turning Centre with Fanuc Series 32i - Model A CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 10 Position Tool Turret, Tailstock, LNS Swarf Conveyor, Filtermist FX6002 Oil Mist Filter Extractor, Machine Weight 10100kg. S/No. ML0144-000404 (2013) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dsdpfx Abjxztl Ho Tswf

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; Dwodpfx Asw Dkfleb Tof PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, Year of construction: 2009, turning length: 1,300 mm, turning diameter: 400 mm, spindle bore: 76 mm, 2-axis CNC lathe DOOSAN PUMA 300LB year of manufacture 2009 Fanuc 21iTB with Manual Guide Chuck 250mm maximum turning diameter 400mm maximum turning length 1300mm Z-axis: 1330mm Dwodpfexxzzqox Ab Tof Axis: 282 (82+200) mm Turret for 10 tools Spindle bore 76 mm Steady rest Swm Autoblok Chip conveyor Probe Tailstock Documentation

Condition: used, power: 127 kW (172.67 HP), color: orange, Year of construction: 2017, operating hours: 6,552 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dsdexxkf Sepfx Ab Tjwf Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan DOOSN DL06 STAGE IV 6 CILINDROS

Condition: excellent (used), Year of construction: 2020, operating hours: 1,688 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,120 mm, power: 34 kW (46.23 HP), Vehicle Description Diesel Forklift DOOSAN D25GP Year of manufacture: 2020 According to hour meter: 1,688 hours 2.5 ton lifting capacity 2.12 m overall height 4.70 m lift height 34 kW - Triplex full free lift mast - Sideshift - Load guard - Work lights - Good tires - Original paint - Simple mechanical machine for such a recent year! Dwjdoxxgpmspfx Ab Tef Sale price: €11,900 net Affordable delivery available!

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 765 mm z-travel 520 mm Dwodpexzk Npefx Ab Tsf weight of the machine ca. 10000 kg

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Dodoxzq Ufjpfx Ab Tjwf Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,437 h, load capacity: 3,000 kg, lifting height: 5,560 mm, free lift: 1,650 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, power: 343 kW (466.35 HP), motor manufacturer: Doosan, fork carriage width: 1,040 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 45 mm, turning radius (inner): 1,900 mm, turning radius (outer): 2,450 mm, tire condition: 40 %, front tire size: 28x9–15, rear tire size: 6.50–10, overall weight: 4,175 kg, Equipment: CE marking, front guard, full service history, head guard, lighting, pallet forks, === KEY SPECIFICATIONS === Year of manufacture: 2017 Hours: 2437 h Maximum lifting capacity: 3000 kg Maximum lifting height: 5560 mm Mast type: Triplex (FFT) Dwsdpexzgydefx Ab Tsf Fork length: 1200 mm Side shift: No Drive: Diesel Transmission: Automatic Cabin: Enclosed cabin Heated cabin: No Tyres: Pneumatic tyres Stabilizers: No Engine manufacturer: Doosan Emission class: Stage IIIA Weight: 4175 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and complete documentation included Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced, and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €13,875 (EXW, excl. VAT) Reliable machines from first owner with full maintenance history and professional technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are fully inspected, CE-approved, and ready for immediate operation. Spare parts and expert assistance available upon request. === SHIPPING === Crane loading available on request for smooth handling during dispatch. Flexible shipping options tailored to your destination and logistics requirements. All transports professionally arranged by the Collé Rental & Sales logistics team.

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Dwedpfx Ajxxdmieb Tsf Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: MV0092-002171, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, table width: 1,500 mm, table length: 670 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, For sale a used CNC milling machine DOOSAN DNM6700 in very good condition. The machine is only 4 years old and still looks and works great. The reason for sale is unifying all the company machines DOOSAN DNM 6700 – Technical Specifications X-axis travel: 1300 mm Y-axis travel: 670 mm Z-axis travel: 625 mm Rapid Traverse Rates X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Servo Motors Dwsdpoxzgcrefx Ab Tjf X / Y / Z: 3 kW each Table Table size: 1500 × 670 mm Max table load: 1300 kg T-slots: 4 × 125 mm, 18 H8 Spindle Motor (continuous / 10 min): 11 / 18.5 kW Spindle speed: 12,000 rpm Max spindle torque: 118 Nm Taper: ISO 40, 7/24 (BIG-PLUS BT40 in equipment list) Tool Changer Tool magazine type: CAM-type Capacity: 30 tools Tool holder: BIG PLUS BT40 Max tool Ø: 80 mm (125 mm with adjacent pockets empty) Max tool length: 300 mm Max tool weight: 8 kg Tool-to-tool change: 1.3 s Chip-to-chip: 3.9 s Coolant System Tank capacity: 325 L Pump: 0.25 kW, 0.04 MPa, 150 L/min LUBRICATION: Tank capacity: 1.4 L Pump output: 1.67 MPa × 0.15 L/min (60 Hz) Air & Power Requirements Air: 0.54 MPa × 250 NL/min Power: 3-phase, AC 220 V, 60 Hz, 42.55 kVA DIMENSIONS: Footprint: 2597 × 3350 mm Height: 3100 mm Weight: 8500 kg CONTROL: -FANUC STANDARD EQUIPMENT: Hydraulic unit Cooling system Work light Door interlock Leveling pads Operator 3-color signal lamp Screw-type chip evacuation system Parameter manual & operation manual Chip conveyor + coolant tank & chip tray (from expanded equipment list) EXTRA OPTIONS: 15" screen Preparation for 4th axis Through-spindle coolant 20 bar (3.7 kW, 2.0 MPa) Spindle head cooling system Oil skimmer Absolute position encoder Spindle 12,000 rpm CAM-type 30-tool magazine

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Dwsdpfothb Icex Ab Tef Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition; inspection during operation is possible by arrangement. Bar feeder length: 1,500 mm. Equipped with Fanuc control system, new linear guides and covers installed in 2024. Runs without issues, accuracy within 0.02 mm. Djdpjxy N Ihofx Ab Tjwf

Condition: used, Year of construction: 2010, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model A CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Coolant Filtration System, Spindle Chiller, Machine Weight 31,000kg. S/No. HM12500058 (2010) - CE Mark Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Djdpfx Ajxzgcxsb Towf

Condition: excellent (used), machine/vehicle number: FRAOF-1380-00038, Year of construction: 2014, operating hours: 5,170 h, lifting height: 8,720 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: TAB, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, Battery: 750 Ah, 48 V, Year of manufacture 2017, Brand of battery TAB Lifting capacity: 1.600 kg Djdpfxjwdvz Ej Ab Tjwf Maximum passing height: 345 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-04-09 Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA Dwsdpfxexzaqio Ab Tof CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Dwjdpfxjxzga De Ab Tsf

Condition: excellent (used), machine/vehicle number: FBA17-1390-00801, Year of construction: 2020, operating hours: 1,191 h, free lift: 2,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Espex, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,600 mm, Weights Empty weight: 4.875 kg Dwedpfxorpgvye Ab Tef Battery Battery: 620 Ah, 80 V, Year of manufacture 2020, Brand of battery Espex Functional Lifting capacity: 2.500 kg Maximum passing height: 220 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Fork carriage: Sideshifter Latest inspection: 2024-02-22 Additional information Please contact Johanny Hendrikse for more information