Used Door Lite Cut Out Machine for sale (76,072)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components Credey Au Alepfx Ailod • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Codpfx Aey D A Ifoiljrd Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: new, Partial sales possible. Codpfjyw Rv Rex Ailerd Quantity discount only applies when purchasing the entire lot.

Condition: new, functionality: fully functional, Year of construction: 2026, FIELD: Machine type Fiber Laser Cutting Machine FIELD: Manufacturer HawkTech/Dardontech FIELD: Model HTL Series (HTL3015 / HTL4020 / HTL6020 / HTL6025 / HTL8025 / DHTL12025) FIELD: Condition New FIELD: Year of construction 2025 Crsdpfsymc Ucjx Ailjd FIELD: Technical data / Description (copy the entire text below) NEW – DS Series Fiber Laser Cutting Machine | Available in 6 models | Immediate delivery from stock Condition: new, Year of construction: 2025, functionality: fully functional TECHNICAL SPECIFICATIONS: Max. processing sheet: 3,000 x 1,500 mm (DS3015) up to 12,000 x 2,500 mm (DS12025) X axis stroke: 1,530 mm (DS3015) – 2,530 mm (DS12025) Y axis stroke: 3,030 mm (DS3015) – 12,030 mm (DS12025) Z axis stroke: ≤150 mm (smaller models) / ≤200 mm (DS8025, DS12025) Max. XY speed: 120 m/min Max. XY acceleration: 1.2 g (DS3015) – 2.5 g (DS12025) X/Y positioning accuracy: ±0.03 mm (DS3015/DS4020) / ±0.05 mm (larger models) X/Y re-positioning accuracy: ±0.02 mm (all models) AVAILABLE LASER POWER OPTIONS: 1 kW / 1.5 kW / 2 kW / 3 kW / 4 kW / 6 kW / 8 kW / 12 kW / 15 kW / 20 kW MACHINE FEATURES: Welded steel frame with high-temperature aging treatment for long-term rigidity Gantry dual-drive structure for stable high-speed motion Aviation-grade aluminum beam and Z-axis High-precision rack and bilateral gear system Concave-convex follow-up cutting head for adaptive surface tracking Universal steel ball support table Multiple limit protection: induction limit, hard limit, origin limit AVAILABLE OPTIONS: Dust collector: 4 filters (5.5 kW) / 6 filters (7.5 kW) / 8 filters (11 kW) Stabilizer: SWF-30KVA up to SBW-150KVA INCLUDED SERVICES: 12-month warranty Spare parts availability Technical support and commissioning assistance CE documentation available upon request Sold by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK and EU. Price upon request.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force Crsdpfxev T True Ailjd - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, functionality: fully functional, Year of construction: 2016, degree of automation: automatic, laser power: 3,600 W, sheet thickness (max.): 10 mm, pipe diameter (max.): 254 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 4,500 kg, We are offering this used TRUMPF TruLaser Tube 7000 laser cutting machine, year of manufacture 2016. Resonator 3.6 kW 6.5 m loading + 6.5 m unloading, two conveyor tables for workpiece sorting Automatic profile magazine 4.5 tons + manual loading Bevel cutting up to 45 degrees Increased profile/pipe diameter up to 254 mm Max cutting thickness 10 mm Internal weld seam sensor External sensor (detects seamless pipes) Csdpfx Asylvd Isilord If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm Credpfx Aisym Unzeled - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle Crjdpfey Nmycjx Ailod – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request. Cjdpfozhkmuox Ailjrd

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Cedpezhi Taofx Ailsrd

Condition: excellent (used), Year of construction: 2021, Thorwesten MPZ for standard profiles, as well as lift-and-slide door frames and sills, consisting of: Cutting center Thorwesten ASZ 4.2M in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Infinitely adjustable cutting angles from 22.5° to 157.5°. Automatic optimization and processing of leftover pieces. Saw blade diameter 500 mm. Including dust extraction system and waste conveyor belt. Set up for Veka profile system, including widening and special profiles. Full HD panel with Windows 10 operating system. Thorwesten VT joining machine in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Automatic profile transfer from the ASZ cutting center. Steel insert compartments. Chain compartments for automatic transfer to the PBZ machining center. Thorwesten PBZ 4.2M profile machining center in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of reinforced lift-and-slide door frames. Dynamic reinforcement screwing unit, as well as a second screwing unit from below on a separate servo axis. Set up for Veka profile system, including widening and special profiles, as well as Roto hardware system. Full HD panel with Windows 10 operating system. Codpfxjzhi Nhj Ailerd

Condition: good (used), functionality: fully functional, total width: 1,790 mm, total length: 850 mm, total height: 1,800 mm, empty load weight: 650 kg, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, DGUV certified until: 08/2027, overall weight: 650 kg, Weighing scale, Kemper Imperator II Crsdpjzfxzhjfx Ailsd Capacity: approx. max. 1,500 pieces per hour with manual control with central lubrication with industrial-grade plastic hopper for approx. 160 kg of dough Machine in stainless steel design and mobile Connection: 400V, 16A-CEE plug Dimensions: 1790 x 850 x 1800 mm, W x D x H Used machine Visit our large showroom!

Condition: good (used), Year of construction: 2002, Oxy-fuel cutting machine ESAB Suprarex SXE-P1 4500, no. 20.203.217, year of manufacture 2002, 2 kVA/230V, with controller, table size approx. 300 x 150 cm Cedpfxsy N Trls Ailjrd

Condition: ready for operation (used), Year of construction: 2002, cutting width (max.): 92 mm, Equipment: safety light barrier, Year 2002 Spare blade Shims Credpfx Aszhirpjiljd Number of cuts: 1.5 million

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Cjdpfx Aszfwxxoilsrd Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available. Codpoyryzdjfx Ailord

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m Cedpfx Aex E Eihjilord SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, functionality: fully functional, working width: 2,100 mm, working length: 3,100 mm, Ziener oxy-fuel cutting system with Kemper extraction table 2100x3100mm and Kemper extraction unit type 810700090. The system has 3 cutting torches, is fully operational, and can be inspected under power. Cjdpfx Aioyryrioljrd

Condition: like new (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser power: 1,500 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, table length: 2,000 mm, table width: 1,300 mm, working length: 1,300 mm, working width: 1,300 mm, total length: 2,985 mm, total width: 2,160 mm, total height: 2,000 mm, Sengfeng 1313G Fiber Laser – 1.5 kW – Precise and High-Performance Laser Cutting System For sale is a powerful Sengfeng 1313G fiber laser with 1.5 kW laser power, ideal for precise and efficient cutting of metals. This machine is perfectly suited for metalworking shops, workshops, or manufacturing companies that value high cutting quality, speed, and reliability. Technical Data & Highlights: Model: Sengfeng 1313G Laser power: 1.5 kW fiber laser Working area: 1300 × 1300 mm Suitable for materials such as stainless steel, steel, aluminum, brass, and copper Cjdpfxsyrthke Ailord High cutting speed with very clean cut edges Energy-efficient fiber laser technology with low maintenance requirements Precise CNC control for accurate results Compact design – also ideal for smaller production areas

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Credpfjzd Ur Tjx Ailjd Type: GV 60 20 Table dimensions: 6000 x 2000 mm Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. Crsdpfxozd Td Ij Ailod These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Credowyb S Iepfx Ailjd Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Circuit Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Cjdpfxszhby Ss Ailjrd

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Laser power: 4.4 kW Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Table length and width: 3000/1500 mm Credpeyztchofx Ailed Cutting area -x/-y: 3000/1500 mm Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!

Condition: used, Year of construction: 2009, from a well-known manufacturing plant in Bulgaria. Crodszd Ry Tepfx Ailed