Used Dmu 40 Monoblock for sale (249)

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 B-axis -10 - +180 ° c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed B-axis 1 - 10.800 °/min rapid traverse B-axis 30,00 U/min size of pallet 800 x 630 mm max. workpiece diameter 800 mm workpiece height max. 1.330 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück Njdewiii Hjpfx Abweld tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg total power requirement 57,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Nlsdpfx Aozg Nmkjbwod Chip conveyor Paper band filter

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) Nledpfx Aswglnysbwsd 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Nlsdpfx Aozfx T Dobwod Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a 24-position tool magazine and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63V vertical machining center we have for sale. Contact us for further details. • Table size: 800 x 500 mm • Network connection: Interface available for file transfer from computer network • Tool measurement: Tool probe installed • Workpiece measurement: Workpiece probing Technical Specification Nedpfx Abjzdt Akewsld Taper Size SK 40

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 12,700 kg, spindle motor power: 18,000 W, DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h Spindle performance: 18 kW Control: Heidenhain iTNC 530 ShopMill Travel Y-axis: 700 - mm Nsdpfx Aey Tkdgjbweld Tool Changer: Yes Dimensions (LxWxH) approx.: 5000 x 3000 x 3000 mm Tool holder type: SK 40 Travel Z-axis: 700 - mm Weight approx.: 12,700 kg Travel X-axis: 1800 - mm Grinding spindle speed: 14000 - rpm Year of construction: 2,011 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. Nlodpfxszcqlue Abwod • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Nljdozcqa Sopfx Abwod Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: ready for operation (used), Year of construction: 1994, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1994. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Number of tools: 120 (o "Tool capacity: 120") Nledozcp Alspfx Abwod • High-pressure coolant: 40 bar • Coolant tank: 1,000 liters • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC Control: HEIDENHAIN MillPlus X mm: 600 Y mm: 700 Z mm: 550 B mm: -30 / +180 C degrees: 360 Number of pallets: 5 Table dimensions mm: 630 x 500 Table load capacity kg: 600 Cutting feed rate mm/min X, Y, Z: 10,000 Maximum rapid traverse rate m/min X, Y, Z: 30, 30, 30 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: 40 Torque Nm: - Tool changer type: Chain Positions in tool changer: 60 Maximum tool diameter: mm: 100 Maximum tool diameter with adjacent positions empty: 160 Maximum tool length mm: 350 Maximum tool weight kg: 10 Coolant tank capacity l: 750 Coolant through spindle: Yes Equipment: Nsdpfjzbcy Isx Abweld Chip extractor included 5-position automatic tool changer included Coolant through spindle included New spindle, 2024

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Nljdpotdcfhofx Abwsd Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Nledpfx Aozdcb Rsbwed than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: X-axis travel: 300 mm Y-axis travel: 160 mm Nodpfx Aezamw Ijbwjld Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit- Chip Conveyor Not Included Technical Specification Nlsdpoy Uvnyofx Abwed Through-spindle Coolant No

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper Nodsy Ty A Sspfx Abwsld - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm Nlodpotumqvefx Abwsd max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min Nedpfjv Dxxnex Abwsld feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm Nsdpfx Absyaci Howjld max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) Nlsdpetqmr Rsfx Abwed - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. Nlsdpox R Em Dsfx Abwjd max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Njdpjx S Rxnsfx Abwjld Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Nledoylw D Aepfx Abwsd Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min Nledpfxey S Azhj Abwod • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: good (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 5,000 rpm, !!!LOCATION SALE D-74219 MÖCKMÜHL!!! Universal machining center DECKEL MAHO MC 800C with manual 5-axis table and 30-position tool changer Control system: PHILIPS 432 Spindle speed: 1-5,000 rpm Nlsdpfxjzbhc Uj Abwed Tool holder: SK 40 Number of magazine positions: 30 X-axis: 800 mm Y-axis: 500 mm Z-axis: 600 mm A-axis: manual, stepless B-axis: manual, stepless Accessories: Coolant system SK 40 tool holders The machine is fully functional and can be inspected while powered on.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Njdpfx Abjzaq Ecjweld Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach