Used Dmg Mori Milltap 700 for sale (186)

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Ljdpjyha R Rsfx Ahvshd Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: used, Year of construction: 2008, x-travel 500 mm Lhjdpfoycxiuox Ahvod y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC530 total power requirement --- kW weight of the machine ca. ca. 5,0 t dimensions of the machine ca. 5,10 x 6,10 m

Condition: like new (used), Year of construction: 2018, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 1,100 mm, table length: 3,200 mm, number of slots in tool magazine: 60, DMG MORI DMF 260/11 LINEAR 5 AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC: Heidenhain iTNC 530 Table size: 3,200 x 1,100 mm Travel X / Y / Z: 2,600 x 1,100 x 900 mm Table load capacity: 4,000 kg Rotary table capacity: 1,200 kg Machine weight: 27,750 kg Taper: DIN 2080 A-50 (ISO 50) Tool magazine capacity: 60 positions Spindle speed: 10,000 rpm Blum tool probe Additional machine equipment and maintenance carried out - Internal and external air and coolant supply, through the spindle via M function (40/80 bar) - Upper external air cooling (evacuation for higher chip volume via M function) - Headstock vibration control module - Preventive maintenance up to date: oil changes, filters, coolant, performed as per manufacturer’s schedule or operational needs Lhsdpfx Aoytrzxohvjd - Y-axis spindle replaced at 9,256 hours - Belleville washers replaced at 13,903 hours - Mechanical tool probe with option for Blum laser installation (laser included) - DMG probe - 3D QuickSET - Coolant gun - X-axis linear drive - Basic machine dimensions: Length: 8,600 mm; Width: 5,800 mm; Height: 3,200 mm - Chip conveyor

Condition: reconditioned (used), Year of construction: 2016, CNC Lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline control system Year of manufacture: 2016 Maximum turning diameter: 315 mm Center distance: 685 mm X-axis travel: 224 mm Z-axis travel: 600 mm Spindle bore: 91 mm Lhedpfxoyn Np No Ahvsd Maximum spindle speed: 4,000 rpm Includes the following accessories: Sliding guard with interior lighting 12-station turret with 12 driven stations C axis, Y axis +/- 50 mm 5 driven tools VDI 40 60 tool holders VDI 40 HAINBUCH hydraulic collet chuck with foot switch On-machine tool measuring system Workpiece pick-up device Tailstock with quill 4-color signal light Chip conveyor Blow gun Coolant system with reinforced pump, 20 bar Operating manuals

Condition: excellent (used), Year of construction: 2014, CNC controller: M730BM Capacity Y-axis travel mm: ±50 Turning length mm: 510 Max. turning diameter mm: ø 356 Upper turret Number of tool slots St .: 12 Lhsdpsyn Iatjfx Ahvsd Speed ​​driven tools RPM: 10.000 Main spindle Speed ​​spindle rpm: 5.000 Counter spindle Speed ​​spindle rpm: 6.000 Automation (Gantry Loader System GX-05 AI) GX-05 AI Gantry Loader package (left-side installation, double gripper hand). 14-station integrated workpiece storage. 20-pallet expanded workpiece storage. Custom gripper jaws for the loader hand. Modified lifting device with sensor and storage mounting device.

Condition: excellent (used), Year of construction: 2012, operating hours: 4,961 h, functionality: fully functional, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 4,961 h, spindle nose: HSK-E32, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Including plenty of tool holders and clamping fixtures for dental manufacturing Lhjdpfsyr Difex Ahvsd

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC machining center DMG DECKEL MAHO DMF 260-11 with travelling column, suitable for machining large and heavy components in the energy, engineering, or automotive sectors. The machine is equipped with a modern DMG ERGOline control panel and a robust design for high precision and stability during machining. Technical specifications Axis travels X: 2600 mm Y: 1100 mm Z: 900 mm Table Table size: 3200 × 1100 mm Max. table load: approx. 4000 kg Spindle Max. speed: 10,000 rpm Taper: SK40 / SK50 (depending on configuration) Lsdpfx Aeyrrcyjhvshd Control system Siemens / Heidenhain (ERGOLINE panel) Tool magazine Up to 60 positions Machine weight Approx. 25,800 kg Power supply 400 V / 50 Hz Connected load approx. 77 kVA (according to nameplate) Equipment Fully enclosed working cabin Automatic tool magazine Cooling system Chip conveyor DMG ERGOline control panel Paper filtration of coolant

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Ljdpfx Aox Hqh Sshvshd

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Lsdpfx Ajyq H Arehvehd Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Condition: good (used), Year of construction: 2012, Universal Machining Center Machine type: DMG DMU 60 evo Control: Heidenhain iTNC 530 Year of manufacture: 2012 TECHNICAL DATA: Lhodpfsyq Hx Hjx Ahved Travel paths: Number of controlled axes: 5 X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis: -5° / +110° C-axis: 360° Rapid traverse (X/Y/Z): 10 m/min Max. spindle speed: 24,000 rpm Tool holder: HSK 63 Tool changer Number of tool stations: 60 NC rotary tilt table Table size: 600 x 500 mm Max. workpiece weight: 400 kg Equipment features: Chip conveyor Tool breakage monitoring: Blum Laser Electronic handwheel Roto Clear Internal coolant supply (IKZ): 40 bar - 23 L/min Coolant tank: 600 l Paper band filter Oil mist extraction Measuring probe Operating mode: 4 Air through spindle center Chip rinsing gun 3D quickSet

Condition: ready for operation (used), Year of construction: 1999, operating hours: 23,576 h, functionality: fully functional, machine/vehicle number: 10980001683, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain, workpiece length (max.): 300 mm, workpiece width (max.): 160 mm, rotational speed (max.): 18,000 rpm, overall weight: 13,000 kg, spindle speed (min.): 20 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, I am selling here a DMG 125 P 5-axis machine Simultaneous 60 tool slots, the tools are included in the total price Lhodpfxswqpnlj Ahvod Inspection possible at any time The machine was running until recently and is fully functional.

Condition: excellent (used), Year of construction: 2011, operating hours: 59,234 h, functionality: fully functional, Manufacturer: Deckel Maho Pfronten Type: DMC 210 FD Machine type / Typology: 5-axis portal machining center with milling/turning table (FD table) and pallet changer Alternative designation: 5-sided / 5-axis portal milling and turning machining center Year of manufacture: 2011 Condition: Very well maintained, in working condition Operating hours: According to hour meter Control: Siemens 840D Solutionline Control type: Fully automatic Number of axes: 5 Ledox Sylkepfx Ahvshd Tool taper: HSK 100 Travel X: 1,800 mm Travel Y: 2,100 mm Travel Z: 1,250 mm B-axis: 210° C-axis: 360° Table length: 1,850 mm Table width: 1,850 mm Max. workpiece length: 1,500 mm Max. workpiece weight: 5,000 kg Max. spindle speed: 6,300 rpm Max. feed rate: 60 m/min Distance table to spindle: 1,500 mm Tool magazine: 180 positions Total installed power: 163 kW Power supply: 400 V / 3N / PE / 50 Hz Connected load: 167 kVA Max. current: 241 A Max. fuse protection: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Machine weight: 50,000 kg Equipment: Platform, coolant unit, chip extractor, Renishaw MP10 probe, operating manual / documentation Inspection: Possible under power by appointment Description: This machine is a 5-axis portal machining center with milling/turning table (FD table) and pallet changer. The Deckel Maho DMC 210 FD is designed for 5-sided and 5-axis complete machining of large and heavy workpieces in a single setup, combining milling and turning operations in one machine. Thanks to its rigid portal design, the machine offers high precision, stiffness and dynamic performance. The FD table enables turning operations in addition to milling, reducing setup times and allowing efficient complete machining. The machine is in very well maintained condition, fully operational, and can be inspected under power by prior appointment.

Condition: used, Year of construction: 2015, operating hours: 37,735 h, functionality: fully functional, machine/vehicle number: 14595607194, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, feed length X-axis: 42 mm, feed length Y-axis: 42 mm, feed length Z-axis: 42 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, nominal power (apparent): 33 kVA, torque: 130 Nm, controller manufacturer: Siemens, controller model: 840D, total height: 2,910 mm, total length: 4,383 mm, total width: 3,395 mm, table load: 2,000 kg, rotary table diameter: 9,900 mm, rotational speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, NO DEALER ENQUIRIES – Dealer enquiries will not be answered! We are offering a DMG MORI DMC 1450 V (vertical machining centre) from our inventory for sale. Condition Fully functional, in ongoing production Demonstration/inspection under power possible Details Operating hours: 37,735 h Machine No.: 14595607194 (nameplate: 4595607194) Factory ID: 3044578 Spindle: up to 10,000 rpm Power supply: 400 V (±10%), 50 Hz, 33 kVA, max. 48 A, fuse protection 50 A Total weight: approx. 9,900 kg Year of manufacture: according to nameplate 2015 (delivery/installation possibly 2017 – refer to documentation) Disassembly/Collection Disassembly/loading and collection by arrangement If you have any questions, require further technical details (control system, tool magazine, ICS, etc.), or would like to arrange a viewing, please send a message. _____ Inventory List – DMG MORI DMC 1450 V Basic Machine Manufacturer: DMG MORI Machine type: Vertical machining centre Model: DMC 1450 V Technical Basic Data X-axis: 1450 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 36 m/min Lhedpfx Asypi Dcehvsd Spindle speed range: 20 – 14,000 rpm Spindle: Inline spindle Power: 14.5 kW / 11.5 kW (40/100% duty cycle) Tool holder: SK40 DIN 69871 Tool clamping: DIN 69872 Tool changer: 20 positions (drum magazine) Table size: 1700 x 750 mm Measuring system: indirect X / Y / Z Control Control: Siemens SINUMERIK 840D solutionline User interface: Sinumerik Operate Control panel: ERGOline control Monitor: 19 inch Options / Equipment Tool magazine extension Chain magazine SK40 Capacity: 60 tool positions including double gripper and mechanical setup aid Touch probe Heidenhain TS 649 DMG Infrared measurement system Direct measuring system for X / Y / Z axes including air purge Coolant/air blow-off switching External via M function Air blow through spindle centre Selectable via M function Filtered air with low oil content Internal coolant supply – Basic Package 3 Rotary union spindle Internal coolant supply Paper band filter 40 bar / 600 l Chip conveyor Bed flushing Enclosure roof Rinsing gun For chip rinsing Oil and emulsion mist separator Mechanical (only with enclosure roof option) Operating mode 4 Process monitoring in production Documentation Machine documentation in German User interface Screen text German/English DMG Netservice Client Remote service Installation on external PC

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW Lhedpjx Icyvjfx Ahved -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Lathe DMG MORI NLX 2000 SY/500 Equipped with DMG MORI M730 UM MAPPS CELOS control system Year of manufacture: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: ± 50 mm Spindle bore: 65 mm Main spindle speed range: 4,000 rpm Counter spindle speed range: 6,000 rpm Driven tool speed range: 10,000 rpm Including the following accessories: Lhedpfx Aeylnq Hehvod Working area door with interior lighting 20-position turret with 20 driven stations C axis, Y axis Touch probe (Marposs) Counter spindle, parts catcher Manual tool presetter (HS) Hydraulic collet chuck with foot pedal (HS) Hydraulic collet chuck with foot pedal (GS) Bar feeder LNS Move S2 30 tool holders Various driven tools Direct linear measuring system on X, Y, Z axes 4-color signal lamp Chip conveyor Coolant system Operating manuals

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Control: Siemens SL Tool stations: 240 Tool holder: SK 50 Lhedpfxjylikzo Ahvod Number of pallets: 2 High-pressure internal coolant (IKZ) Chip conveyor Measuring probe X-axis: 1600 mm Y-axis: 1100 mm Z-axis: 1400 mm Table length: 1250 mm Table width: 1000 mm

Condition: excellent (used), Year of construction: 2016, 5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of manufacture: 2016 Ljdsyk T Inspfx Ahvshd Travels: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: °-5/+110 C-axis: °360 Clamping surface rotary axis: Ø 630 x 500 mm Spindle interface: SK 40 Tool magazine: 32 slots Speed: 12,000 rpm Internal coolant – 12 bar high-pressure pump Accessories: Chip conveyor 3D infrared measuring probe Table probe

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret Lhodpfxsyk Hrge Ahved - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Ledpjykxmisfx Ahvohd Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale is a 3+2 axis machining center from DMG, model DMU 35 M. This machine comes from a technical training institute and was used mainly for training purposes, including CNC control and setup. Special attention should be paid to its very low spindle hours. Technical data: Year of manufacture: 2009 Ljdpfxox Aiiqs Ahvjhd Spindle hours: 625 Machine no.: 18065358844 X axis: 350 mm Y axis: 240 mm Z axis: 340 mm Max. spindle speed: 6,300 rpm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors in X, Y & Z axis Clamping surface: Ø 400 x 280 mm Swivel range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: manual change Tool holder: SK 40 Tool clamp: pneumatic/mechanical Space requirements: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Upon request, transport and loading can be organized Europe-wide at additional cost. All prices are plus VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Lhedpfx Aswbhq Hohvsd Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, total width: 510 mm, total length: 1,300 mm, total height: 1,800 mm, For sale is a presetting device of the DMG brand and type UNO 20/40 The device is in good condition, fully functional and ready for immediate use Technical data: Year of manufacture: 2015 Travel Z: 400 mm Lsdpfx Ajuy Sf Rohvohd Travel X: 50-200 mm Measuring range: 400 mm Diameter: 400 mm Max. tool weight: 200 kg Overall dimensions: 1300*510*1800 mm Total weight: 240 kg Tool holder: SK50-SK 40 On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Ljdpfxoyi Am Dj Ahvshd Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Ljdpjxwxc Aofx Ahvohd Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Lodpfx Asxpg H Hjhvshd Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40