Used Dmc104V Linear for sale (2,362)

Condition: used, HFA-L-440 S, fimotec-fischer, linear oscillating drives and fork light barrier Model: 08-6073-02 Type: HFA-L-440 S Cgjdpeutag Ijfx Afmjw Condition: Used

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min Cgodpfxszdk Evs Afmsw rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm Cgjdpfx Aszdkhkofmjw MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Manufacturer: JBT - Stein Model: JSO-IV-40-22TF Year: 2006 Condition: Used Serial Number: 0372PO183 Stock Number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal fluid, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated Clean In Place (CIP) Continuous hot water, single pass, belt washer With Stein Humitroll moisture monitor and control Cgsdpsy Icgisfx Afmsw

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m Cgjdpspvu Absfx Afmow 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Codjpvuyrepfx Afmegw Your specialist and contact for intralogistics

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Cgodpfx Aot Hw Trofmew Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Cgjdpfx Ajzdd Tnjfmow Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Lathe Manufacturer: Gildemeister Model: CTX 420 linear V3 Year of Manufacture: 2003 Control Unit: Heidenhain Plus IT Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Cross travel: 260 mm Longitudinal travel: 635 mm Drive power (40/100%): 25/37 kW Speed range: 20 – 5000 rpm Weight approx.: 6500 kg Equipment: Driven tools: 12 stations Tool turret: 12-position Sauter turret VDI 30 Partly hollow clamping chuck Tailstock Automatic quill travel Quill taper: Mk 5 Chip conveyor Cgodpsxc Uq Tofx Afmew Measuring arm Oil mist extraction unit Subject to prior sale and errors.

Condition: used, 10 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 9 x pre-assembled frames / approx. 250 cm high / 60 cm deep / new • 32 x shelves / 122 cm long (special size) / 60 cm deep / 150 kg load capacity / used • 3 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €770,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P1115 Csdeq Abnvspfx Afmogw We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: excellent (used), Year of construction: 2015, operating hours: 16,927 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, Manufacturer: DMG MORI Type: DMF 260-11 linear Year of manufacture: 2015 Control system: Heidenhain 530 Main spindle renewed in 2026 Technical data: Travel distances: Cgjdpfszfzbksx Afmew - x-axis: 2,600 mm - y-axis: 1,100 mm - z-axis: 900 mm - b-axis: +/-100 degrees - c-axis: nx 360 degrees Main spindle: - Speed range: 20 - 10,000 rpm - Drive power (40/100%): 44 / 32 kW - Torque (40/100%): 303 / 275 Nm - Tool holder: SK 50 Work table: - Fixed table with integrated rotary table - Table clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool positions: 60 - Chip-to-chip change time: 7.5 s - Operating hours: approx. 16,927 h Technical features: - Internal cooling system 40 bar - Spray gun for chip extraction - Rotating viewing window Accessories: - Paper band filter 600 l - Chip conveyor - 2x oil and emulsion mist separators - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW Cjdpfoyz Tkfox Afmjgw • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg Cgsdpfx Afoy Skmrjmew • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Codpfx Ajyq H Arjfmjgw Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 6,000 mm, Krauss Maffei linear robot Year of manufacture: 2014 X-axis: 1500 mm Y-axis: 2400 mm Z-axis: 6000 mm Cgedjyk S Ndjpfx Afmow

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143984 Serial number: 143984 Cedpjvzr Svsfx Afmegw The KUKA KRC4 linear axis is a high-quality axis that is ideal for industrial applications. It offers precise motion control and is particularly important for automation processes and robotic systems in manufacturing. With its robust design, it guarantees reliable performance in demanding applications.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Cgedpjzcqncjfx Afmew Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,097 h, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools Cgjdpfx Aex D R Hgefmsw • Preparation bar loader • Operating hours: 69246 h • Spindle hours: 23097 h • Tool holder: VDI 40 Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 Cjdpfx Aeytd E Nofmjgw power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details x-travel 2500 mm y-travel 920 mm Control Heidenhain iTNC 530 total power requirement 92 kVA weight of the machine ca. 25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m Additional information Operating hours: 113475 Spindle hours: 58183 (June 2026) Heidenhain iTNC 530 CNC control Equipment: Tool changer Cgjdszclwlopfx Afmow Chip conveyor Tool measuring device Electronic handwheel Control cabinet with air conditioning Machine is sold without clamping devices, vise, and tools.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 08/2028, overall weight: 49 kg, total width: 400 mm, total length: 560 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 10 A, NEW +++ Twino Double-Arm Dough Mixer +++ NEW Advantages: less dough heating, gentler kneading process TOP table-top model Simple digital control Timer with 5 speeds for 3 - 12 kg of dough / 2 - 8 kg of flour simple, robust technology Csdpfsu A Hicsx Afmogw DGUV V3 tested – available only from us 230V connection NEW machine, SAB tested 24 months warranty + spare parts service Options: Maintenance contract E-Box Delivery service Service package Leasing & rental service Visit our large bakery machine exhibition!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 940 kg, total width: 1,200 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Lift kneader ++++ TOP model Diosna lift kneader ++++ Cgsdpfx Aou A Hhrjfmew Dough machine with simple, robust technology for a maximum of 200 kg of dough Stainless steel bowl and kneading arm 2 bowl carriages, 2 speeds Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Option: Delivery service Leasing & rental service Maintenance contract Service package Delivery with floor anchoring Instruction and commissioning We have a large selection of lift kneaders in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 540 kg, total width: 1,100 mm, total length: 800 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, TOP Spiral Mixer Diosna S 120 A for a maximum of 120 kg of dough Dough machine with flour dust hood, NEW 2 bowl carriages 2 speeds, with timer robust technology DGUV V3 tested – available only from us Connection 400V, 16A-CEE plug Used machine, refurbished Cgedpjxwytpsfx Afmjw with warranty + service Optional: Maintenance contract Additional bowl carriage E-Box Service package Delivery & floor anchoring Instruction & commissioning We have other TOP spiral mixers in stock!

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE. This offer concerns a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. In 2025, the machine underwent a comprehensive overhaul and technical refurbishment, with various components being replaced. This overhaul, performed by DMG Used Machine, cost 60,000 euros alone. Here is a brief overview of the work carried out during the overhaul: - Restrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy guide chain (Z-axis) - Replacement of all components in the energy guide chains X and Z (cables, hoses, fittings, etc.) - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 series (KH400) chuck. Control system: Heidenhain. The machine is still used for occasional production. Cedpey I U Uljfx Afmegw Inspection is possible at any time; the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE.

Condition: good (used), Year of construction: 2013, functionality: fully functional, 5-axis CNC grinding machine - Solution Line control system - Direct drive on all linear axes - Direct drive in all rotary axes Cedpfxszcch Is Afmegw - Direct path measuring systems in the X, Y, and Z axes - Automatic 5-position grinding wheel changer with its own NC drive for grinding wheels and coolant distributor, with collision monitoring - Central lubrication Further details available upon request.