Used Deflector Hood for sale (1,394)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Kedszc Agkjpfx Abfolu Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: ready for operation (used), A semi-automatic shrink wrapping machine Minipack-Torre with L-sealing system and shrink hood is available. Sealing frame dimensions X/Y: 840mm/600mm, max. product dimensions X/Y/Z: 800mm/550mm/200mm, max. film width: 800mm, max. film roll diameter: 300mm, packaging capacity: approx. 900/h. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1250mm, weight: approx. 300kg. An on-site inspection is possible. Klsdpfx Abozfaa Eefsu

Condition: good (used), Offered is a used screening plant Powerscreen Commander 1800. Kledpennz Tkofx Abfeu Screen deck, screen box, two piece conveyor belts, hood belt, 80 belt width, 4-cylinder Deutz engine, new hydraulic lines and connections, new electrical wiring. Fully functional.

Condition: used, functionality: fully functional, mileage: 359,669 km, power: 338 kW (459.55 HP), first registration: 04/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Kjdpfxszcvtds Abfolu Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: used, functionality: fully functional, mileage: 395,719 km, power: 331 kW (450.03 HP), first registration: 05/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Klodpfxjzcuqno Abfsu Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: used, functionality: fully functional, mileage: 418,680 km, power: 338 kW (459.55 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Drive Axle Ratio 2.31 Fuel volume left side 825 dm3. Klodpfx Abjzcuqhefou Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector

Condition: used, mileage: 3,500 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment Double deep fryer Double sink 3-burner gas griddle 2-burner gas stove Refrigerator-freezer combination Beverage refrigerator Box body with snack kitchen Extractor hood * On-board computer * ESP (Electronic Stability Program) * Automatic climate control * Fog lights * Radio * Rain sensor * Power steering (CV) * Cruise control * Central locking with remote control Kledpfx Abjy Rwypefeu Standard equipment Passenger airbag deactivatable, Drive type: front-wheel drive, Electrically adjustable exterior mirrors, Brake assist, Electronic Stability Program, Cruise control system, 6-speed gearbox, Automatic climate control, Light and rain sensor, Fog lights, Pollen filter, Radio USB, Gear shift indicator, Power steering, Start/stop system, Central locking

Condition: used, mileage: 298,950 km, power: 260 kW (353.50 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 46 m³, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,480 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, ANTOS 2535 L refrigerated box body, 7.40 m, with roll-up shutter + folding tail lift, 2 tons. * CARRIER ICELAND 18, cooling system for driving and stationary operation, 380 V, electric * 18 pallet spaces * adjustable and folding partition * Vehicle number for customer inquiries: 4749 * Engine version Euro VI, version 2 * Tag axle, 7.5 t, steered, with load relief, liftable * Distance monitoring assistant * Differential lock, rear axle * Air conditioning * Lane keeping assist * Environmental badge (green) * Tail lift * Active Brake Assist 3 * Trailer coupling, standard, D40, Rockinger * Driver alertness assistant * High Performance Engine Brake * Air suspension, rear axle * Air deflector, lockable * Axle configuration 6x2 ENA * Electronic Stability Program (ESP) * Airbag, driver * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver's air suspension seat, comfort * Gearbox G 211-12/14.93-1.0 * Weight variant 26.0 t (8.0/11.5/7.5) * Mercedes PowerShift 3 * Safety Pack Classic without roll stability control * Locking system, with central locking * Tank 290 l, right, 650 x 565 x 950 mm, aluminum * Cruise control * Two-seater * Storage compartment, high, on the engine tunnel * AdBlue tank 60 l, left * Start-up assistance, speed limitation 30 km/h * Roof hatch/ventilation flap, roof * Heater, electronic compressed air supply unit * Engine OM936, R6, 7.7 l, 260 kW (354 hp), 1400 Nm * Wheelbase 5200 mm * Tires, tubeless, 315/70 R 22.5, rear axle * Tires, tubeless, 315/70 R 22.5, front axle/front lift axle/rear lift axle * S cab ClassicSpace, 2.30 m, tunnel 320 mm * Stabilizer bar, front axle * Engine PTO, rear, hydraulic pump ISO 7653D * Digital tachograph, EC, speed, ADR No liability for printing and typographical errors. Sale only to business customers. Errors and prior sale reserved.* Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Warranty insurance possible upon request from the insurer * TÜV / UVV tail lift inspection / tachograph check and installation of an OBU device by our local partners * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * Kjdpszd H U Tjfx Abfslu ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Kodpfoxpn Tzjx Abfjlu Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: new, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Kljdpfx Asxmk Ddsbfsu Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: ready for operation (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: Klodpfx Aboxa Hi Nofeu - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW Klsdpfx Abevu Hgbsfeu - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, Kljdpfx Ajzd Hdnjbfeu tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Klodpezd Hc Refx Abfju Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used Kodpfezd Hcqex Abfelu in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: new, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Ksdjtg Ailepfx Abfolu Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: like new (used), Code: 0406 Brand: SCM MINIMAX Model: T55 ES - CE Standard Spindle moulder with long table for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics, composite materials and various – CE Standard – Year 2023 Technical specifications: Shaft diameter 35 mm Shaft length 125 mm Shaft rotation speed rpm 3500/6000/8000/10000 Max tool diameter 240 mm Motor power 6,6 Hp Spindle unit adjustment handwheels positioned on the front of the machine Gravity indicator on the spindle lifting handwheel Side extensions and telescopic front roller extension for a support of 2500 mm Spindle rotation reversal Spindle speed display by LED lights Kledpfezcqrnjx Abfju Adjustable spindle guide Electrical installation for automatic feed Extraction hood inlet diameter 120 mm Overall dimensions mm 2550 x 900 x 1150 h Weight kg 348

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, Minipack-Torre Pratika 56 MPE — Fully Automatic L-Bar Sealer. Year of manufacture: 2018, Serial No.: 1800603. Direct from end user, no dealer involved. Fully automatic L-bar sealer for shrink and film packaging. Schneider Electric Magelis touchscreen with 256 programmable recipes (settings for format, temperature, and speed per program). KEY SPECIFICATIONS - Output: up to 3,600 units/hour Ksdpjy Stuxsfx Abfslu - Usable sealing bar area: 600 × 400 mm, packaging height 0–240 mm - Film: polyolefin/PVC/OPP 7–80 µm; film roll up to Ø 300 × 700 mm - 230 V single phase, 3 kW — no three-phase power, no compressed air required - Dimensions (L × W × H): 2,485 × 1,245 × 1,715 mm, weight 763 kg - Schneider brushless servo drive, PLC logic, emergency stop, safety exclusion key switch CONDITION Very good visual condition, maintained by an authorized service partner — full service history documented. Lifespan counter: 36,415 packs — moderate usage. In May 2025: sealing wire, upper and lower rubber strips, and Teflon tape will be renewed. KNOWN REPAIR REQUIREMENTS (transparent) One conveyor belt (infeed/outfeed belt, part no. 400201) is worn. Authorized service partner quote available: material €357.59 + labor €522 = €879.59 net. Replacement is also possible to perform yourself. PDF of repair quote available on request. SCOPE OF DELIVERY Machine fully operational (glass hood, Magelis touchscreen, all safety features), connection cable, roll of film (remaining stock), mobile on four swivel castors. Original documents (data sheet, order confirmation, maintenance correspondence available on request). LOCATION & HANDOVER 18239 Satow (Mecklenburg-Vorpommern). Self-collection is preferred — free inspection with functional test possible by appointment. Transport can be organized for an additional fee (special pallet + crating required due to 763 kg weight). TERMS - Asking price: €14,500 net (plus VAT) - Commercial sale: Marko Strehk Sole Proprietorship - Sale “as is”, with all liability for material defects excluded in accordance with §§ 437 ff. BGB; disclosed defects transparently listed above - Buyer has the option for pre-inspection and functional testing — complaints after handover are excluded - For intra-community delivery to buyers with VAT ID: tax-exempt delivery possible If interested, please inquire with a brief description of intended use — response within 24 hours.

Condition: new, color: grey, Year of construction: 2025, Container Description Our offer includes a complete package of high quality, making it unbeatable. We source the gas appliances exclusively from qualified manufacturers of high standards. The construction and the entire kitchen with all equipment are NEW! Container Details Availability: Ready for immediate delivery Color: Anthracite Delivery is included in the price, delivery to the curbside. Structure is made from isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees optimal interior temperature year-round. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal standing height: 2,385 mm Two new containers are for sale: Kljdsy R S Ubjpfx Abfsu Container 1: Empty – ideal for individual use or custom conversion The water system opening, circuit breaker box, two serving hatches, and ceiling lighting are already installed (see final images in the gallery). Price: €25,000 net Warranty: 1 year warranty on body and electrical system. This price applies to the standard configuration shown. Changes or additions will incur additional costs. Container 2: Fully equipped with professional foodservice equipment – ready to use, perfect for street food Price with equipment listed below: €39,500 net. Gastronomy Equipment; Kitchen made of stainless steel Gas Appliances: • Bertos gas cooker with 2 burners, dimensions (W x D x H) 300 x 600 x 290 mm, output: 6.2 kW, made of stainless steel, G6F2B • Bertos gas grill, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B • Bertos gas fryer, 2 x 8-litre basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11-litre propane gas cylinders Refrigeration • Under counter refrigerator ‘Liebherr’ • Combination refrigerator Liebherr Water System • Water system with canisters, 30-litre capacity with fresh and waste water containers • Two stainless steel sinks with fittings • Hygiene package with paper towel dispenser and soap dispenser • 10-litre hot water boiler • Pump Lighting • LED ceiling lighting • LED lighting with color effects around the serving hatch, remote-controlled • Emergency light Additional fittings • Serving and work surfaces made of brushed stainless steel • Two serving hatches • Insulated partition at the cooking area (fire-resistant) • Extractor hood with labyrinth filters • Anti-slip flooring for commercial kitchens • Sneeze guard (optional) • Side door entry • Generator cabinet Warranty: 1-year warranty on body and kitchen This price applies to the standard configuration shown. Changes or additions will incur additional costs. We can also build this model to your custom specifications. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? Many vehicle details can be customized to your specifications!

Condition: used, machine/vehicle number: -0910-, mileage: 76,385 km, power: 70 kW (95.17 HP), first registration: 08/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, Fully equipped food truck with a used kitchen We offer flexible rent-to-own and leasing options. Please contact us. Vehicle description: Used vehicle with a kitchen that has been in use for four months! The kitchen was built with great attention to detail. We have made it our mission to convert new and used vehicles into food trucks in accordance with standards. Today, we can proudly say that our years of expertise have convinced our customers of the quality of our work. Visit us, and we will convince you of the quality of our vehicles! Technical data: Engine displacement: 2,143 cm³ Emission class: Euro 5, environmental badge 4 (green) Kjdpfx Aezd Di Ijbfolu Permissible total weight: 3,500 kg Rear parking assist Color: Matte gray Gastronomic equipment, wooden kitchen Gas appliances Gas fryer "Bertos", 2 x 8 liter capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Cooling options Refrigerator with glass front, also suitable for beverages Small refrigerator "Liebherr" Water system Water system with water canisters, 30-liter capacity with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package with folding towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color change around the serving hatch with remote control Emergency light Other equipment Serving counter and work surfaces made of brushed stainless steel Insulated wall at the cooking area (fireproof) Exhaust hood with labyrinth filters Non-slip floor for gastronomy Splash guard optional Built-in insulated generator cabinet Entry through step We will take care of the required paperwork (TÜV inspection and expert opinion). Warranty: 1 year warranty on the kitchen Of course, we can also build this model differently! Do you need a shorter or longer version of this model? Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? You can determine many vehicle details yourself!

Condition: used, Year of construction: 2014, operating hours: 8,150 h, functionality: fully functional, machine/vehicle number: 600-687 und 610-352, overall weight: 1,000 kg, rotor diameter: 252 mm, number of blades: 14, total length: 5,100 mm, total height: 810 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, control cabinet height: 215 mm, total width: 1,100 mm, power: 16 kW (21.75 HP), type of input current: three-phase, rotational speed (max.): 590 rpm, filling opening width: 300 mm, filling opening length: 3,000 mm, sieve perforation: 10 mm, extraction nozzle diameter: 200 mm, input current: 45 A, infeed height: 450 mm, Equipment: CE marking, documentation/manual, Horizontal shredder with vibrating chute Weima WLH 300 and WRR 300; manufactured in 08/2014 Ksdpfx Abjzd Dhdofslu - Ideal for shredding long and short pieces of wood - Automatic start-up via photoelectric sensor - Noise protection hood in the infeed area to reduce noise emissions

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault Kledpfxszd Db Rj Abfsu This model can of course be customized! Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? You can determine many vehicle features yourself!

Condition: used, Year of construction: 2016, functionality: fully functional, We are selling a MIWE multi-deck oven system, ideally combined with an automatic loader (athlet). It consists of a MIWE ideal 6.1820 T oil-gas oven, manufactured in 2016, with a 220mm oven interior height, designed to be loaded with a MIWE athlet. It features 6 ovens, 180cm wide x 200cm deep (22m²), with a MIWE Touch Control system, including a Weishaupt oil burner (gas option available), exhaust hood, and athlet connection. Also included is a MIWE loader athlet L 1820, manufactured in 2016, for loading up to 18 ovens, suitable for the aforementioned MIWE ideal, with a motorized transverse travel axis for moving up, down, and in/out automatically. Additionally, there are 3 stainless steel transport trolleys, each with 10 stainless steel transverse pull-out racks. A mounting console for the transverse pull-out racks is attached to the athlet table. Everything is fully functional and stored in our warehouse in D-74626 Bretzfeld. Inspection is possible by appointment. Installation or, upon request, an overhaul can be arranged. Please contact us. In addition, a MIWE ideal 2200 FO with 220mm high ovens from 1998 is also available. It is fully functional and has a new combustion chamber. Furthermore, we have a suitable stainless steel conveyor belt in stock. This conveyor belt was previously installed on a Daub multi-deck oven. Klodpfx Aezd Damobfou Both items are available for an additional price upon request.

Condition: good (used), 415 USED FN Aerotherm rotary rack oven. EXTERNAL DIMENSIONS (in cm): -W: 150, -D: 283 (with hood 350), -H: 241. Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN. Kljdpozd Ay Esfx Abfsu

Condition: used, operating hours: 7,098 h, functionality: fully functional, power: 38 kW (51.67 HP), first registration: 07/2018, fuel type: diesel, color: white, fuel: diesel, driver cabin: day cab, gearing type: automatic, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, New version, 38 km/h, 2-speed gearbox City Ranger 3500, 38 kW 4-cylinder Perkins 404D-22 38 kW (51 hp) at 3,000 rpm (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65-liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for use on sidewalks! Kljdozd Aniopfx Abfou Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system Air-sprung Grammer comfort driver's seat 2 x work spotlights in the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-release plate Mechanical implement relief Quick-Shift quick-change system for attachments for summer and winter services Preparation for hydraulics and electrical system for optional equipment High-pressure valves (360 bar) – only on BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated reversing camera incl. 7" color screen - Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with the reversing camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed control 0-150 rpm Dust reduction through spray nozzles for each disc brush Automatic start-up protection (For sweeping and collecting) With hydraulic adjustment of the right brush Sweeper material container with suction fan Color: container in stainless steel look, panel in white RAL 9003 High-dumping height 1600 mm 250-liter fresh water tank 300 liters recycled water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change (For sweeping and collecting) Dirt container deflector plate Jump starter cable / auxiliary start device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance PRICE SURCHARGE: Handheld suction hose 4m € 1,300 plus VAT Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.