Used Decoiler for sale (299)

Condition: good (used), Year of construction: 1998, Manufacture: LIV Load capacity: 2x2t Psdei D D Eujpfx Ah Hegg max plate width: 310 coil inner diameter: 380-460mm Max roll outer diameter: 1200mm

Condition: good (used), Manufacturer: LIV load capacity: 2x2t maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm Pedpfx Ahoi Azy Hs Hsgg

Condition: good (used), load capacity: 200 kg material width: 200 mm Podsihvdropfx Ah Hogg coil inner diameter: 240-500mm Coil outer diameter: 1200mm

Condition: good (used), Year of construction: 1998, Manufacturer: LIV Pgodpfxoi D Dxye Ah Hsg load capacity: 2x2t maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Pjdjhhyzcspfx Ah Hogg Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Podpexx R Utjfx Ah Hjgg

Condition: good (used), load capacity: 200 kg material width: 300mm coil inner diameter: 240-580mm Pgsdpfx Aoh Rfhheh Heg Coil outer diameter: 1200mm

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Pjdpfx Aowvv Rqjh Hegg Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) Pgodpslil Ewofx Ah Hog yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² Pgjdobicz Hjpfx Ah Hsg coil weight max. 4 t coil-dia max. 1.500 mm

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd Pgedpfsxqh Sajx Ah Hsg 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm Pjdpfxjwirz Ej Ah Hjgg 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 4000 600 M D1300) € 21.800,--

Condition: new, Year of construction: 2024, neu 2024 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm Pgedpfxowirrko Ah Hsg 1550 mm 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder

Condition: used, Year of construction: 1988, gebraucht Pedowirq Tspfx Ah Hogg 1988 070009 prompt, Zwischenverkauf v Deutschland 1600 € 400 mm 700 mm 1500 mm 2050 mm 820 mm 1000 mm with brake with 2 spare mandrels

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € Pedpfx Ahewirqae Hjgg 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 600 M D1300) € 14.800,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

Condition: new, neu ca. 12 Wochen ab Auftrags Pedpswirp Asfx Ah Hjgg Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,--

Condition: new, neu Pgodowirp Nopfx Ah Hjg ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Pgsdpfx Ahjxiyx Ns Hog

Condition: used, carrying force: ca. 50 kg tape width: bis ca. 50 mm tape exterior-Ø: 750 mm engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm Pgsdpfjc Rf Slox Ah Hjg weight: ca. 100 kg

Condition: ready for operation (used), De uitrusting bestaat uit: - 3 afwikkelaars Elba 5 ton capaciteit - 1500 mm - Richtunit RAS 26.45 - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen RAS 82.16 - Ras vouwmachine snelheid: 15 m/min Vermogen: 16 kW Pgsdpfx Ahewwbf Nj Hsg

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Strip witdh: max. 100mm Pgsdpfx Ash T Ducoh Hjg Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Pjdpoq A Tw Rsfx Ah Hegg Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Pgsdpfxetgvgpo Ah Hog Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Pedpfx Ajpvlf Ssh Hsgg Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Year of construction: 2008, condition: ready for operation (used), A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible. Pgsdpfxsxgucwe Ah Heg