Used Deckel Maho Dmc 60 H for sale (344)

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm Dusdpfsw A I Uusx Aaaop z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/500mm, Speed: 8000rpm, Tool holder: SK40, Feed rate: 10m/min, Rapid traverse: 20m/min, Table dimensions X/Y: 1000mm/600mm, max. table load: 500kg. Machine dimensions X/Y/Z: approx. 3560mm/2700mm/2250mm, Weight: approx. 6500kg, Operating hours: approx. 66000h, Spindle hours: approx. 18000h. Including approx. 30 SK40 holders and 2x Allmatic hydraulic vices. Documentation available. An inspection on site is possible. Without IKZ and tool changer. Dujdpfxjyn Nzrj Aaasp

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,440 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,440 mm, feed length Y-axis: 600 mm, feed length Z-axis: 510 mm, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: 530, workpiece height (max.): 500 mm, table width: 600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 100 mm, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Deckel Maho DMC 144 V linear vertical machining center, year of manufacture 2003. Transformer power: 39 kVA Maximum current: 53 A Current: 63 A Supply voltage: 400 V Frequency: 50 Hz Auxiliary voltage: 230 V Control voltage: 24 V Year of manufacture: 2003 Dusdpfx Ajyn Eqvoaaop If you have any questions or require further information, please contact us by message or phone.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" Djdpfx Aeuqmvkeaaoup With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Dujdpfx Aoylmdfoaaep Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Dedpfx Ajw I R I Hsaasup Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Djdpfxewxd Ags Aaaeup Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1994, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a Deckel Mori 70 V gantry machining center. The machining center is ready for immediate use and fully functional. Technical specifications: Year of manufacture: 1994 Grundig Dialog 112 control system X travel 700 mm Y travel 550 mm Z travel 500 mm SK 40 chuck mount Brushless AC servo motor Drive type: Continuously variable 0-8000 rpm Feed speed: Continuously variable 10000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Knoll scraper conveyor belt Internal cooling system Rapid traverse x/y 30000 mm/min Rapid traverse z 20000 mm/min Dedpfxov T U Udj Aaaoup Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT. Viewings available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: good (used), Year of construction: 1994, Deckel Maho DMC 103 V Control: Heidenhain Working area: 1,000 x 600 x 600 mm Spindle speed: max. 8,000 rpm Torque: 83 Nm Tool holder: SK 40 Table clamping surface: 1,200 x 600 mm Max. table load: 800 kg Required space, approx.: 3.7 x 3.6 m Dusdpfx Aeykbiyjaaep

Condition: used, Year of construction: 2016, operating hours: 12,618 h, machine/vehicle number: 14585615844, Travel (X/Y/Z): 1,150x700x550 mm, 120-position SK40 tool changer, weight: 9,650 kg, control: HEIDENHAIN, 1 chip conveyor, 1 belt filter system Djdpjyidlfsfx Aaasup

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 180, controller manufacturer: Siemens, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, overall weight: 14,000 kg, table length: 630 mm, table width: 800 mm, controller model: 840D-Powerline, torque: 980 Nm, coolant supply: 40 bar, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 32,000 W, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 8,000 rpm, spindle speed (max.): 10,000 rpm, table load: 1,000 kg, operating hours of spindle: 22,963 h, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Dodoui Np Rspfx Aaajup Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: excellent (used), Year of construction: 2007, CNC Machining Centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D Technical specifications: X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm Table size: 1000 x 560 mm Spindle speed range: 20 to 10,000 rpm 3D path control Tool holder: SK40 Tool changer with 30 positions Dodpoyhbx Ajfx Aaajup

Condition: good (used), Year of construction: 2007, Machine designation: DMU60T2-1976 Year of manufacture: 2007 Control: Heidenhain iTNC 530 Working area: X630 Y560 Z560 Duodpjyiz Nksfx Aaajp Spindle speed: 20 - 12,000 rpm Tool holder: SK40 incl. chip conveyor & cooling system Operating hours: 52,290 h Spindle hours: 16,850 h

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible. Dodpfsw Dut Hsx Aaasup

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Dedpfx Aaov H Dgceaeup

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Dusdpfx Aev H Dgpsaajp

Year of construction: 2006, condition: ready for operation (used), Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. Dodpfeta H S Sjx Aaasup

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible. Duedpsyg Nuijfx Aaajp

Year of construction: 2008, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Dodpfov H Dgisx Aaasup

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm Dodpfxsx A H Rls Aaaoup z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead

Condition: excellent (used), Year of construction: 2004, CNC Machining Center DECKEL MAHO DMC 64 V 2004 Heidenhain iTNC 530 Technical data: Duedpfx Ajydl Hpeaaep X-axis: 640 mm Y-axis: 600 mm Z-axis: 500 mm Table size: 800 x 600 mm Workpiece weight: max. 600 kg Spindle: SK 40 12000 rpm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1540501589A, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table width: 540 mm, table length: 850 mm, spindle speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 3, Equipment: documentation/manual, High Speed Spindle (18,000 RPM), Tool Standard is CAT-40, Dusdjyg Dt Tepfx Aaasp Attached Accessories: 30 pieces of tool holders, Tool Presetter

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 2881-0469, Machine is running. Axes are moving. Spindle is rotating. Dujdpfx Aex Azqmsaaep

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Duodpfx Aasyay D Uoasp Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Dodpjyaywbjfx Aaaeup Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t