Used Deckel Fp4At for sale (679)

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: Heidenhain, controller model: 426-430, 5-axis area with X-axis travel: 1800 mm, Y-axis travel: 2000 mm, Z-axis travel: 2000 mm, and C-axis: 360 x 0.001 degrees. The spindle speed is 8000 rpm with an SK 50 tool holder. Tool changer with 60 positions, table size of 1700 x 1400 mm, and a maximum table load of 5000 kg. Podpfx Aexzil Aednsrd

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA and 2 Accessory Cabinets from University Ownership, Excellent Condition Technical Data: Prsdpfjxxzl Nox Adnjd >> Machine No.: 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting, and rotating table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Drawbar system S20x2 >> Weight approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Central lubrication system 2 accessory cabinets with tooling: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, vise, tailstock, faceplate, additional small swiveling, tilting and rotating table, rotary table, tailstock, vise, and much more About the Machine: Offered here is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets filled with accessories. Previously owned by a university. An oil change has been carried out. Mechanically and electrically tested. The digital display makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP3 under power on site.

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Prsdpfx Adexxyd Donod Operating manuals

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex CH toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 Prjdpfsxzdkaex Adned CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load capacity up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servo motors for X/Y/Z axis Swivel range: 360 degrees Table clamping: plus 105 / minus 150 degrees Weight: 2 t Tool holders, hydraulic vice Price: EUR 5,750 plus VAT, ex location

Condition: excellent (used), Year of construction: 2022, operating hours: 46,259 h, functionality: fully functional, machine/vehicle number: 11210001263, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 10,000 rpm, Control: Heidenhein Mill plus Clamping Table 1000 x 800 mm Taper HSK 100 Toolchanger 120 position Exchange of tables : 2 tables Coolant tank: 2000l Machine is in running condition, machine has spindle coolig Predoxzddtjpfx Adnod

Condition: used, Year of construction: 2007, Suitable for regrinding and remaking all types of woodworking and metalworking tools Accessories: Full enclosure, Pickup loader, disc magazine Ø approx. 350 mm, workpiece Ø max. 50 mm 8-position grinding wheel changer Direct measuring system with glass scales on all linear axes A-axis with torque drive for cylindrical grinding NUMROTO 3D simulation NUMROTO 3D collision monitoring NUMROTOplus simple milling cutters NUMROTOplus extension for complex milling cutters NUMROTOplus standard drills, step drills NUMROTOplus extension for complex drills, step drills NUMROTOplus extension for differential helix NUMROTOplus form milling cutters NUMROTOplus extension for cylindrical grinding Fast TCP/IP data interface Electrostatic fume separator LTA, Automatic fire extinguishing system Fixed coolant ring on the grinding head with up to 12 adjustable nozzles Additional Coolant supply at the dividing head Oil drip tray 2 grinding wheel holders X-axis grinding stroke: 400 mm Y-axis grinding stroke: 310 mm Z-axis grinding stroke: 305 mm C-axis swivel range: 224° A-axis speed: max. 850 rpm Maximum workpiece diameter: about 250 mm workpiece length max.: approx. 900 mm Maximum workpiece length during face grinding.: about 400 mm grinding length max.: 400 mm Workpiece holder: ISO 50 Grinding spindle speed infinitely variable: 1000 to 8000 rpm Prsdpoxxquysfx Adnod Drive power grinding spindle: 15 kW Connected load approx.: 400 V / 50 Hz / 22 kVA Dimensions W x D x H approx.: 2350 x 3300 x 2150 mm Weight approx: 4000 kg colour: Gray

Condition: good (used), Year of construction: 1984, Ref. -No.: 10594 Manufacturer: DECKEL GILDEMEISTER Type: MD 3S Year of construction: 1984 Pjdpfexxpcijx Adnsrd Type of control: CNC Control: ELTRO MPULS Storage location: Halberstadt Country of origin: Germany Turning Diameter: 400 mm Turning Length: 600 mm Swing Diameter: 600 mm Spindle Bore: 73 mm

Condition: good (used), DMU 60P hi-dyn, power-on 37,732 h, spindle 22,802 Prodpoxy T Uljfx Adnjd

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 mm Machine weight 3400 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Prodjxxnfpspfx Adnjd Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Pallet Sequential Operation Enclosed Work Area Enclosure Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1997, Immediately available from training workshop: Predpfoxy Ralsx Adnsd CNC 5-axis milling machine Deckel Maho Model: DMU 50 T Year of manufacture: 1997 Control: MillPluss SK 40 Spindle speeds: 20 – 9,000 rpm Travel X/Y/Z: 500/400/400 mm Table: tilting rotary table 700 x 500 mm Manual tilt B axis 105° (-10/+95°) Manual rotation 360° Table load max 200 kg Tool changer: 16 positions Feed rates max 10,000 mm/min Rapid traverse: 12 m/min Drive: 17 kW Weight: 3 t Extensive accessories: hydraulic vice, tool holders, milling cutters Price: €6,500.— plus VAT ex location

Condition: good (used), Internal item no.: 25094 Universal milling machine Deckel FP1 + Accessories (machine vice / dividing head / SK40 tool holders / tailstock) The milling head is equipped with an M16 drawbar Psdpfxsxxkwnj Adnerd + Additionally, S20x2 drawbar The machine can be inspected under power.

Condition: reconditioned (used), Year of construction: 2004, With MILL PLUS iT CNC control Year of manufacture: 2004 Travel distances: X 1000 Y 1000 Z 1000 mm Speed range: 0 – 8,000 rpm stepless (SK 50) Pjdpfsxn Aibex Adnjrd Including the following accessories: - NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine slots, double gripper (SK 50) - Fully enclosed safety cabin with sliding doors and interior lighting - Coolant high-pressure system – 40 bar - Chip conveyor - Rotoclear - 3D probing system Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - Chip-blowing pistol - 50 tool holders SK 50 - 3 height-adjustable machine mounts - Transport device - Operating manuals

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. Pjdpfx Ajwwwqhjdnsrd The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Year of construction: 2005, DMC 80U duoblock, year of manufacture 2005, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, 60-position automatic tool changer (ATC), coolant through spindle, serial no. 1147 000022 3, power-on hours: 42,344, spindle hours: 23,544 Pjdpjxy T Hnofx Adnerd

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 15000 RPM Spindle motor power 46 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 2600 mm Z-Axis Movement 900 mm Y-Axis Movement 1100 mm Predpfx Aexxdtvodned This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Pedew Eyhfjpfx Adnord NC-rotary table ø 900 x 630 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Predexyymbepfx Adnjd Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel Pjdpfx Aoxn Aczsdnjrd - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Psdpedr E Apjfx Adnsrd Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2004, DMC 80 U, year of manufacture 2004, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, coolant through spindle, ATC 60 positions, machine number 1120 000170 3, power-on 41,449 h, spindle hours 21,015 h. Pedexy Tybspfx Adnerd

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Pjdoxywb Nopfx Adnerd Travels in X, Y, Z axes: 750X500X560 mm Max. table load: 600 kg Max. spindle speed: 18000 rpm.

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm Prodotqqmhopfx Adnsd spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: ready for operation (used), Deckel SOE Cutter Grinder Maximum grinding length: 90 mm Maximum grindable angle: 180° Prsdpfx Asxyv Axodnod Maximum grindable radius: 10 mm Coarse traverse: 100 mm Fine adjustment: 15 mm Swiveling range of the indexing head carrier: 90° Coarse adjustment of indexing slide: 40 mm Fine adjustment of indexing slide: 12 mm Height from center of tube guide to center of grinding spindle: 140 mm Wheel size: 100 x 50 x 20 mm You are welcome to arrange a viewing. A proper invoice will be issued. For foreign customers, a net invoice can also be provided. A valid VAT identification number is required. Subject to prior sale. Should you have any questions, please feel free to contact us by phone. The telephone number can be found at the very bottom of the item page in the imprint/legal information of the seller. Visit our shop and take a look at our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine/device must be carried out or inspected by a qualified professional. Technical data deviations and errors in the description may occur and are subject to change. Shipping is carried out exclusively to commercial customers – private consumers can only collect in person.

Condition: good (used), Year of construction: 1988, Lid SOE graver-grinding machine year 1988 . Accessories : Collets , Good working condition. Prjdeuqv Naopfx Adned

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, controller model: Dialog 11, overall weight: 4,500 kg, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Due to the acquisition of a new 5-axis machine, we unfortunately have to part with our Deckel. It is in very good condition, with no faults whatsoever. There is no play, and it mills fits impressively well. We have operated it via a CAD/CAM system, and therefore had it upgraded to the largest possible memory. For viewing or if you have any questions about the machine, please feel free to write to me or call me. Pjdpfoxyufrox Adnsrd