Used Cutting for sale (14,271)

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Fsdozikcfepfx Ad Iepi Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Fedpfjzikb Uox Ad Ispi Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, punching force: 20 t, sheet thickness steel (max.): 6 mm, punching diameter: 105 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fodpfx Ajzkvpajd Iopi Punching force: 20 t Sheet metal thickness (steel, max.): 6 mm Max. sheet metal dimensions: 1,000 mm x 2,500 mm Punching force: 200 kN Max. punching diameter: 105 mm Max. sheet metal thickness: 6 mm Max. stroke rate: 180 strokes/min MACHINE DETAILS Mains voltage: 3 x 400 V / 50 Hz Connected load: 10 kVA Control voltage: 24 / 230 V Required fuse rating: 3 x 20 A

Year of construction: 1994, condition: ready for operation (used), Operating wire diameter: approx. 0.05-4 mm, max. feed stroke: 100 mm, cut length: 5-4000 mm, minimum cut length: 5 mm, max. output: 500 parts/min, max. wire speed: 50 m/min. An on site inspection is possible. Fpjdpszkvmxjfx Ad Iji

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, KAMPF (LONGITUDINAL SLITTER) Fpsdpfxszktycj Ad Ioi Desscription:: Year 1979, width 1600 mm, speed 600 m/min Machine is in very good condition and can be seen in production!

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 55 h, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller manufacturer: HyperTherm, controller model: HYPERTHERM EDGE CONNECT, laser type: CO₂ laser, laser source manufacturer: Hypertherm XPR 170 (USA), sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, table length: 8,100 mm, table width: 3,500 mm, table height: 750 mm, working length: 6,000 mm, working width: 2,000 mm, working height: 750 mm, power: 50 kW (67.98 HP), input voltage: 400 V, compressed air connection: 8.5 bar, overall weight: 7,000 kg, total length: 8,200 mm, total width: 4,100 mm, total height: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Baykal BPS 2006 CNC Plasma Cutting Machine – Hypertherm XPR170 High-Definition + True Bevel + True Hole CNC plasma cutting machine in very good working condition - Like NEW, year of manufacture 02/2021 (serial no. 27804), low operating hours - approx. 55h, one owner. Plasma source: Hypertherm XPR170 X-Definition (made in USA) with automatic gas console — cutting capacity 0.5–60 mm, accuracy ±0.1 mm. True Hole technology for superior hole quality on mild steel. Bevel cutting: True Bevel technology — automatic bevel head up to +/- 45° (weld-prep cuts without secondary operations). CNC control: Hypertherm EDGE Connect TC, Windows-based, touch screen. Software: Hypertherm ProNest CAD/CAM with automatic nesting (DXF, DWG, IGES import). Fpedpfx Aszktiqsd Iei Main specifications: Cutting table: 2000 x 6000 mm, sectional fume extraction with CNC-operated electropneumatic dampers Positioning speed: up to 30 m/min, positioning accuracy ±0.01 mm Dual synchronized AC servo drive on longitudinal axis, rack & pinion Automatic torch height control (capacitive initial height sensing + arc voltage THC), torch collision protection Nominal power: 50 kW, 380/400 V Air pressure: 8.5 bar Machine dimensions: 8100 x 4100 x 2500 mm, weight approx. 7000 kg Includes filter/extraction unit and XPR170 consumables starter kit (mild steel) Machine is ready for inspection. Dismantling and loading can be arranged. Price negotiable, export possible worldwide.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, cutting width (max.): 720 mm, stack height: 80 mm, Equipment: safety light barrier, IDEAL 7260 stack cutter, year of manufacture 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic clamping, programmable back gauge, light curtain, air table, made in Germany. Professional stack cutter with hydraulic clamping and 720 mm cutting length EASY-CUT two-stage cutting release for safe, ergonomic operation Fpodszktaiepfx Ad Isi IR safety light curtain in the work area for maximum personal protection Electrically controlled back gauge with touchpad and digital dimension display 99 programs with up to 99 steps and chain dimension function can be stored Electronic handwheel for manual fine adjustment in 1/10 mm steps Infinitely adjustable clamping pressure (250–2000 daN) with optical display Optical LED cutting indicator and three-stage LED table lighting Automatic set function for reference dimension and integrated EJECT function Tool-free blade change with covered cutting edge for increased safety Air table for front and rear table – standard for easy paper handling Robust all-metal construction – durable, repairable, sustainably manufactured

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Co., Ltd, controller model: FSCUT 2000C, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 3 mm, table length: 6,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 6,000 mm, working width: 1,500 mm, working height: 120 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 128 m/min, feed rate Y-axis: 128 m/min, feed rate Z-axis: 30 m/min, cutting speed: 120,000 mm/min, positioning speed: 128 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 4,500 kg, total length: 7,500 mm, total width: 2,500 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, CNC Fiber Laser Cutting Machine 6000 × 1500 mm 3000 W – Metal Technics Polska Professional Fiber Laser Cutting Machine The Metal Technics Polska F6000×1500 3000W CNC Fiber Laser Cutting Machine is designed for precision cutting of carbon steel, stainless steel, aluminum, brass, and copper sheets. Equipped with a Raycus 3000 W fiber laser source, WSX auto-focus cutting head, and BOCHU FSCUT 2000C CNC controller with CypCut software, the machine delivers excellent cutting quality, outstanding repeatability, and low operating costs. Its 6000 × 1500 mm working area allows efficient processing of large metal sheets, making it an ideal solution for manufacturers, fabrication workshops, and industrial production facilities. Key Features 6000 × 1500 mm working area Raycus 3000 W Fiber Laser Source WSX Auto-Focus Cutting Head BOCHU FSCUT 2000C Control System with CypCut Software Maximum positioning speed: 128 m/min Positioning accuracy: ±0.03 mm Repeatability: ±0.02 mm Schneider Electric servo drives Japanese THK linear guide rails S&A industrial water chiller Automatic centralized lubrication system Heavy-duty stress-relieved steel frame Designed for continuous 24/7 operation Fpodpfjzkq S Nox Ad Isi Machine available from stock Technical Specifications Model: F6000×1500 3000W Laser Type: Fiber Laser Laser Source: Raycus RFL-C3000 Laser Power: 3000 W Working Area: 6000 × 1500 mm Laser Wavelength: 1080 nm Cooling Method: Water Cooling Power Supply: 380 V / 50–60 Hz Machine Dimensions: 7500 × 2500 × 1950 mm Maximum Cutting Capacity Material Maximum Recommended Carbon Steel 22 mm 16–18 mm Stainless Steel 10 mm 8–10 mm Aluminum 8 mm 6–8 mm Brass 6 mm 4–6 mm Copper 3 mm 2–3 mm Maximum cutting thickness depends on the material grade, surface quality, and assist gas used. For continuous industrial production, we recommend operating within the suggested thickness range to achieve the highest cutting quality, maximum productivity, and excellent edge finish. Equipment The machine is equipped with a WSX Auto-Focus Cutting Head, Raycus Fiber Laser Source, BOCHU FSCUT 2000C CNC Controller with CypCut Software, THK linear guide rails, Schneider Electric servo drives, S&A industrial chiller, and an automatic lubrication system. Every machine includes installation, operator training, technical support, warranty service, and after-sales assistance provided by Metal Technics Polska specialists. Transport & Contact We organize machine transportation throughout Europe and to countries outside the European Union. Each transport quotation is prepared individually based on the delivery destination and machine configuration. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. If you would like to receive a quotation or learn more about this machine, please contact our sales department. Visit the Metal Technics Polska website to explore our complete range of CNC machines, watch demonstration videos, and discover our latest offers and promotions.

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation Fpjdpfx Aotvm Hded Ioi -electrical diagram

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Fpsdpfswf H Avex Ad Isi Camera-monitored laser work area with transmission to screen

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Fpedpfx Adjyly R Eo Ioi Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Fodpfx Adox Dlwmj Ijpi Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä2726

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Fjdsx Eh Dropfx Ad Ispi Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Cutting table for Laminated Glas Glas Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Fedpfxjwd If Ns Ad Iopi Min. Glas Thickness: 2+2 mm

Condition: used, functionality: fully functional, Year of construction: 2018, With Slat Conveyor, Riedel Chiller Unit, Trumpf Dust Extraction Unit, Sick Safety Light Curtains, Signal Tower & Manuals. Overall Machine Dimensions L9,300 x W5,100 x H2,400mm. Working Range 'X'=3,000mm, 'Y'=1,500mm, 'Z'=116mm. Maximum Table Load 1,100kg. Maximum Simultaneous Table Feed 140m/min. Maximum Laser Power 6,000W. Wavelength 1,080nm. Mean Bidirectional Positioning Accuracy ±0.05mm, Bidirectional Positioning Error A (ISO 230–2:2014) ±0.06mm. Maximum Sheet Thickness Mild Steel 20mm. Maximum Sheet Thickness Structural Steel 25mm, Maximum Sheet Thickness Stainless Steel 25mm, Maximum Sheet Thickness Aluminium 25mm, Maximum Sheet Thickness Titanium 4mm. Maximum Sheet Thickness Copper 10mm, Maximum Sheet Thickness Brass 10mm. S/No. A0221E1080 (2018) Fjdpsyx Hm Iefx Ad Ijpi

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Fedpfx Adszkldye Ispi

Condition: ready for operation (used), Year of construction: 2023, A custom-built slitting and straightening machine Grossmann/BFW for aluminum strip is available. Strip width: 35mm, Straightening unit: multi-roll, Knife type: rotary knives, Strip guidance: roller guidance, Tension control: KTC800A. Documentation available. An on-site inspection is possible. Fjdpfxszklfdo Ad Ijpi

Year of construction: 1979, condition: ready for operation (used), A planer cutting machine in need of repair is offered. Cutting width: 1150mm, insertion depth: 1150mm, max. stack height: 165mm, max. cutting height: 165mm, table height: approx. 900mm, max. back gauge speed: approx. 300mm/s, back gauge positioning accuracy: 0.01mm. Smallest cut without false plate: approx. 25mm, smallest cut with false plate: approx. 90mm, clamping pressure range: approx. 150daN-4500daN, safety clamping pressure: 30daN, max. knife strokes: approx. 45strokes/min. Machine dimensions X/Y/Z: approx. 2600mm/2500mm/1650mm, weight: approx. 3200kg. The measuring system is defective. Inspection by appointment possible. Fsdozklfkjpfx Ad Iopi

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Fpedpfx Adjzklgbs Ioi

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bochu (FSCUT), controller model: FSCUT 2000 + Tube system, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus RFL-C6000 (6 kW), laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 120 m/min, workpiece weight (max.): 900 kg, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 8,500 kg, total length: 9,000 mm, total width: 4,500 mm, total height: 2,300 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, Description Fiber laser cutting machine FT62 with 6 kW power designed for cutting sheet metal as well as tubes and profiles. The machine is equipped with a 1500 × 3000 mm working table and a tube cutting module for tubes up to 6000 mm in length. Tube diameter range is Ø20–Ø220 mm and square profiles from 20 × 20 to 220 × 220 mm. The machine uses a Raycus 6 kW laser source, WSX cutting head and FSCUT CNC control system (Bochu). Thanks to Inovance servo drives, precision linear guides and rack drive, the machine ensures positioning accuracy of ±0.03 mm and repeatability of ±0.02 mm. The machine features a full protective enclosure, exchange working table, smoke extraction system, Tongfei 6 kW water chiller and 80 kVA voltage stabilizer. Maximum positioning speed is 120,000 mm/min. Technical specification Parameter Value Model FT62 Laser power 6 kW Laser type Fiber laser Laser source Raycus Cutting head WSX Control system FSCUT (Bochu) Working area 1500 × 3000 mm Max tube length 6000 mm Tube diameter Ø20 – Ø220 mm Square profiles 20 × 20 – 220 × 220 mm X axis travel 3000 mm Y axis travel 1500 mm Positioning speed 120,000 mm/min Positioning accuracy ±0.03 mm Repeatability ±0.02 mm Cooling Tongfei 6 kW chiller Fpsdpfx Aoyvhm Rsd Iji Power supply 380 V / 50 Hz Construction full enclosure + exchange table Dust extraction smoke extraction system Voltage stabilizer 80 kVA Certification CE Optional equipment Option Price Industrial dust collector 7.5 kW approx. 39,000 PLN Tubest software (tube cutting) approx. 12,200 PLN Cypnest software (nesting) approx. 4,600 PLN Rotary unit left/right change approx. 1500 USD The machine can be configured according to the customer’s requirements. Laser power can be adjusted to individual needs: 3 kW, 6 kW, 12 kW.

Condition: used, Year of construction: 1999, Hello, I am selling a cutting and planing line. The line includes: - Infeed table for a multi-blade saw - Multi-blade saw MAKA V350, 22KW motor, year 1996, cutting width 350 mm, feed length 800 mm - Outfeed table - Cross conveyor - Longitudinal conveyor to the planer - Additional feed mechanisms on the planer table - Weinig Unimat 23 EL planer, year 1999, 59 KW motor, grooved table, 5 cutterblocks, electrically adjustable cutting width and height - Outfeed conveyors from the planer - Cross outfeed conveyor - Pallet truck with mast The line operates automatically. I can send videos of the line in operation via WhatsApp. I will provide more information by phone. Fodpfx Ajzkkrisd Iepi Price: 320 thousand PLN net VAT invoice available.

Condition: used, Year of construction: 2011, Undercut cross-cut saw with continuously adjustable pneumatic cutting feed located at the front of the machine. Pneumatically controlled workpiece clamping device (also serves as a safety guard). Well-protected pneumatic units mounted within the compact machine body, with the maintenance unit mounted externally on the machine base frame. Extra-flat special circular saw motor for increased cutting height. Cut initiation via two-hand control with safety shield. The saw kerf is positioned on the right side with an inclined opening to allow cut-offs and waste pieces to fall freely. Safety Standards: CE compliant (in combination with roller tables), BG dust-tested, Type-tested, Electrical control cabinet integrated into the machine stand, Emergency stop device Processable Timber Dimensions Saw Unit • Saw blade diameter: Ø 550 mm • Carbide saw blade, Z = 60 teeth, WZ20° • Saw blade bore: 80 mm Nominal Cross-Sections (without board curvature) • Max. 750 × 50 mm • Or 710 × 75 mm • Or 660 × 100 mm • Or 570 × 125 mm • Or 450 × 150 mm • Or 260 × 175 mm Permissible timber curvature in all directions: max. 3 mm per meter of length, or max. 10 mm over the entire length. • Minimum end length: approx. 10 mm • Wood species: softwood / hardwood / wood-based materials • Working height: approx. 850 mm Equipment and Technical Data • Powerful saw motor: 5.5 kW • Saw kerf on the right-hand side • Pneumatically lowered safety shield, pivoting away for easier access to the cutting area • Operating voltage: 400 V / 50 Hz Pneumatic and Extraction Requirements • Minimum air pressure: 6 bar • Extraction air velocity: approx. 30 m/s Extraction Connections • Lower housing outlet: 120 mm • Upper guard outlet: 120 mm • Extraction volume: approx. 2,600 m³/h • Weight: approx. 500 kg Specifications are provided for information only. Fpedpjzki Uisfx Ad Isi This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2008, operating hours: 17,410 h, functionality: fully functional, machine/vehicle number: 400149, pump pressure: 6,000 bar, power: 75 kW (101.97 HP), FLOW Waterjet Machine with INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, and sand/abrasive feeding system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been with us since 2008 and has not been in operation since July 2, 2026. The machine will be replaced by a new acquisition. The machine is disassembled and ready for transport. The machine is in very good condition. It is fully functional and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING Bridge Serial No.: 400149 Transport dimensions: Overall height: 220 cm Overall width: 480 cm Overall length: 450 cm Tank size: Length: 425 cm Width: 255 cm Cutting area: Length: 365 cm Fsdpoza A Ayjfx Ad Iopi Width: 182 cm Data sheets for the machine, pump, and software are available (PDF upon request). Inspection before purchase is possible and desirable. Delivery available upon request. Sold in its current condition, as shown in the pictures.

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Fpodpfx Aszkim Sjd Isi Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Fpjdpsyx Svbsfx Ad Iei Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.