Used Cutting Saw for sale (15,537)

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Bdedpfx Asbubukjdred Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Weight 890 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4360x900x1450 mm Weight 560 kg Bodpfx Adoyk H Uhsrodd Total power requirement 10 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1070x1200 mm Weight 1150 kg Bsdpfovz Hzxex Adrjdd Total power requirement 10 kw

Condition: new, Year of construction: 2026, Cutting height 125x220 mm Bdedpfx Aoyk Idwsdrsd machine weight ab. 450 kg Motor output 5,5 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x850x1350 mm Weight 410 kg Bjdjvz Eytopfx Adrsdd Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Bdodpfxevz E Nuj Adrod Total power requirement 16 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Total power requirement 8 kw Bsdevz Hz Eopfx Adrodd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Bdedpfxewt Ua Ej Adred

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 900 kg Total power requirement 5 kw Bdedpfx Adsv A Hr Tjrjd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Bdedpsv A Htksfx Adrjd Weight 1500 kg Total power requirement 10,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 8,5 kw Bdjdpfxov A Htde Adrjd

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm Bdjdsxln Ukopfx Adrsd at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: excellent (used), Year of construction: 2016, For sale is a PRINZ ECOSTAR industrial chainsaw in very good condition. The machine has been used only very little and is technically and visually well maintained. 📋 Technical data: Manufacturer: PRINZ Kettensägetechnik Model: ECOSTAR Year of manufacture: 2016 Power: 7.5 kW Voltage: 3x 400 Volt Speed: 2,910 rpm Weight: approx. 172 kg ✅ Description: Ideal for wood processing, joinery workshops, or industrial applications Perfect for cutting timber packages, boards, or stacks of panels Very low hours – therefore minimal wear Robust and durable industrial quality by PRINZ Immediately ready for operation Bodpfoy Atpwsx Adrodd

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 43153, heavy duty circular saw ..more information following soon.. Bsdpfod N Uw Rex Adrodd

Year of construction: 1995, condition: excellent (used), Very well-maintained vertical panel saw for cutting sheet material. Equipped with a hydraulic unit and accumulator, and double hydraulic clamping. Attachment kit with measuring roller for the splitting wedge. Electrical control cabinet with control system. Bedeh Eyqvopfx Adrodd Control panel with digital measurement input and operation. Photos show the original condition.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Bdedjw Smz Dspfx Adrod

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Bsdpeyymhusfx Adrodd Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Bodpoyyliksfx Adrjdd Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox Bdjdjdzp T Dspfx Adred (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450 Bjdex A Ar Sopfx Adrodd

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds Bdjdpfsx Hw Sqsx Adrjd

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 08 92 00, PIPE SAW KUAG CUT 400 Year of construction: 2005 Bjdpstqpavofx Adrsdd Max. Diameter 400 mm Min. diameter 110 mm With central clamp Application Cutting and chamfering For PE, PP and PVC pipes Also suitable for short lengths from 20 mm length The pipe saw is in very good condition, ready for use

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards Bdsdpfx Adsyu Uriered - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial timber processing Condition: good Bjdpfoyu Uq Esx Adrsdd Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: Bdodjwq N Swepfx Adrod - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg