Used Cup Brush for sale (2,954)

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 centrally electrically adjustable brush units with fine offset adjustment 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: Duodpfx Aexwnifjc Nen Machine width: Weight:

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel Dedjw Axi Aopfx Ac Neun - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Year of construction: 1995, condition: like new (used), The bucket drainer is the perfect machine for the recovery of 0-4 sand, with low energy consumption and little maintenance. Dujdpfxeu Avrtj Ac Nsn - Flow rate: 50 cubic meters/h - Motor 5.5 Kw.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, Brush sanding machine Manufacturer: Cosma Model: 300 H4 C Year of manufacture: 2023 (demonstration machine with warranty!) Duodpfewkqmpox Ac Njn Brush machine for four-sided sanding of mouldings, scaffold boards, profile timbers, etc. Working height: 900 mm Working width for four-sided sanding: 300 mm 2 cylindrical brush units (top and bottom), each 2.2 kW, 1000 rpm. 2 lateral disc brush units, each 0.37 kW, 750 rpm, swiveling Manual height adjustment of the units Feed speed adjustable, approx. 2 - 10 m/min. Control panel: - Brush on/off - Feed speed control Product dimensions: Minimum product length: 800 mm Maximum product width: 300 mm Height: 20 - 100 mm

Condition: repair required (used), functionality: limited functionality, Cup filling machine from Hugart. It was packing 400g cups. Two line machine with an efficiency of 3600 cups per hour. I needs mechanical and electrical repairs. I can sell it as it is, but I can also recondition it and fit with a desired cup format. Details to be discussed. Djdpfx Acexz Uiao Nsun

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Brush Deburring Machine RE 500 Brush diameter: 250 mm Revolutions: 1500/3000 rpm Dedpfxjxzrd Ue Ac Njun Operating manual

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Djdpfx Aceupy Spo Neun Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 900 mm, pass-through height: 300 mm, Brush Machine R 900/2 CE Technical Data: Working width: 900–1,800 mm Max. working height: 300 mm Individual height adjustment of the brushes via handwheel with analogue digital display 2 x 6.2 kW (8.5 HP) motors Infinitely variable feed speed Extraction nozzles: 2 x 140 mm Weight: approx. 900 kg CE-compliant Dimensions: 150 x 170 x H170 cm Suitable for processing wood panels, beams, tongue-and-groove boards, parquet flooring, window frames, etc., to bring out wood grains, or for surface sanding or polishing. Various versions available on request: Different working widths (300, 400, 600, 800, 900, or 1300 mm) and units (1, 2, or 4) as well as options for saw-effect or side brushes. Additional equipment available such as: Oscillation, stepless speed adjustment, more powerful motors, electric height adjustment, extendable supports, Djdpfx Acegf Ii Aj Neun various brushes (steel, Tynex, Scotch-Brite, cotton, horsehair) Please do not hesitate to contact us—we are happy to provide a customised offer. Ascot Griggio Griwood

Year of construction: 1999, condition: used, The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. Cup Diameter: 95 mm Outside diameter Filling Range: 50-500 grams Duedpfoxyh R Ujx Ac Non Capacity: 4800 cups/Hour Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor Guarding: Fully Enclosed Cabin Control Panle: Simple Push button Controls Air Requirements: 6 Bar Pressure Electrical Requirements: 400 v / 3 phase / 50 -60 hz Filling Type: Piston Volumetric Filling Hopper: Included Condition: Good Condition Serviced

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Dedpjt Dpxbjfx Ac Noun Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Dodpoxrgupefx Ac Nsun Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm Dsdpfxoxrb Rfe Ac Noun - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: new, MINK Strip Brushes Dodov Tp Ixepfx Ac Noun Length: 900mm Width: 38mm Height: 75mm Brush Length: 50mm Condition: New

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Dedpfexpqy Rsx Ac Nsun Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: excellent (used), Year of construction: 2004, grinding width: 250 mm, working width: 250 mm, grinding height: 100 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Dujdpfx Ajxvz Uljc Njn Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, type of input current: three-phase, For sale is the bevel gear cutting machine shown in the pictures. The price includes the set of cutters belonging to the machine. The machine is in working condition, ready for use, and does not require any servicing. The machine manual is available. Dodpfxjxur Adj Ac Njun

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 560, working width: 1,200 mm, working height: 800 mm, workpiece height (max.): 100 mm, empty load weight: 1,700 kg, throughput speed: 166 mm/s, TECHNICAL DETAILS Working height (carousel): 800 mm Working width: 1,200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min Dodpfx Acexuqr Dj Neun Spindles length: 6 x 100 x 350 mm Extraction: 2,500 m³/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,210 mm Net weight: 1,700 kg Electrical Data Voltage: 3 x 400/500 V - 50/60 Hz Max./Min. fuse: 32 A Max. power consumption: 15 kW EQUIPMENT lock-itTM spindles

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs Djdpfxsgb D Afs Ac Njun rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS Duedjf Rth Tjpfx Ac Nsn

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. 2 pcs. Surface brushes from top 2 pcs. Side brushes Working width 1300mm Vacuum underpressure table with ventilator. Djdpevylmqefx Ac Njun Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.

Condition: excellent (used), Year of construction: 2011, I sell the widebelt sanding machine COSTA B FFFF 1350, year 2011. Dedpovxfahsfx Ac Njun Configuration: 4 pcs. brushing aggregate with tool included Cleaning unit combined brush and air blow in the outfeed. Working width 1350mm Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 32kW Condition very good ! Available immediately.

Condition: ready for operation (used), Year of construction: 2005, I sell the brushing machine Prochera DSB. Year 2005. 2-side spindle fi.30 x max. 220mm. Motor 1,1 kW. Brush included. Weight 90 kg. Dodovyllmepfx Ac Neun Available immediately.

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Compressed pneumatic air Dodpfx Aoxtal Dec Njun Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Stock no.: 2002709BXA

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Brush sanding and finishing machine / Universal brushing machine Manufacturer: Leif Lorentz / Universal Finishing Systems Model: B 4 1000 Dujdpfexrlgqox Ac Njn Universally applicable as a finishing unit, for dust removal and workpiece cleaning, or for sanding Year of manufacture: 2005 Working width: 800 mm Belt width: approx. 850 mm Pass-through height: approx. 60 mm 2 brush units from above, each 1.1 kW, infinitely variable speed, 350–900 rpm Brush configuration as currently installed. Machine dimensions approx. 2400 x 1300 x 1700 mm

Condition: excellent (used), Year of construction: 2007, Automatic fender polisher 5 brush groups Dusdpfx Acotp Nclo Nen