Used Crosscutting Saw for sale (5,714)

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Bwjdpfx Anen Hwl Ajmor Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Year of construction: 2025, condition: new, functionality: fully functional, new mobile package cutting saw, Holtec Piccolo Bodpfsh Imuvsx Anmowr ideal for making initial, final, and cross cuts on packages of lumber chain set with STIHL chain, type Rapid Super 0.404", for extremely fine surfaces and double-sided, adjustable guide rails (four-way reversible) electric motor, 5.5 kW high cutting capacity for packages up to 1.10 m x 1.10 m and roundwood diameter up to 1.30 m bar length: 1.60 m 400V, 50 Hz 1 year warranty immediately available from stock

Condition: used, Year of construction: 2000, with automatic stop Bodpfx Ajx Srrvsnmowr The stop slides the material to be cut to the cutting position according to the entered measurement Saw blade: rising from below Maximum saw blade diameter (mm): 300 right long table: with automatically adjustable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length – 3550 mm, roller conveyor width – 310 mm Roller width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without extraction system as shown

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke Bwedpfx Asw Slgfsnmer - 150 mm cutting height - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long

Condition: used, - 2250 mm cutting width - 80 mm cutting height - 2 x 3.7 kW saw motors Bjdehkm A Nspfx Anmowr

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, Bsdpfx Ajb Nrg Usnmowr easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Bwedpfxeb Rnv Se Anmsr Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Bwjdpfx Answxmhljmsr Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V Bwedpfob A N Akox Anmsr -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Bjdpfxob A N Ale Anmjwr -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Bedpfx Asyh Hc Rjnmjwr

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Bsdpfsd H Hmhex Anmewr Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Vesto saw with two discs for sale Bwsdpfxstqt T Ie Anmjr - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Bwsdpfx Asfv Hphonmjr Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Bwodpfxoznbkks Anmsr Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

Condition: good (used), Year of construction: 2002, machine/vehicle number: 122668, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 600 mm, saw band length: 7,470 mm, saw band width: 54 mm, section length (max.): 760 mm, section length (min.): 8 mm, TECHNICAL DETAILS Saw Blade Dimensions: 7,470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1:7) Working Area Material diameter - round material: max. Ø 460 mm Material dimensions - square material (w x h): max. 600 x 460 mm Cut-off length - single stroke: min. 8 mm, max. 760 mm Cut-off length - multiple strokes: min. 8 mm, max. 9,999.9 mm Minimum part length in automatic mode: 90 mm Working Height Working height: 720 mm MACHINE DETAILS Bwedpfjzmdrnex Anmor Dimensions & Weight Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm Width with chip conveyor (option): 4,650 mm Weight: approx. 6,000 kg Electrical Data Main motor: 7.5 or 9.2 kW Hydraulic motor: 2.2 kW Saw drive motor: 0.18 kW Coolant pump: 0.19 kW Chip conveyor (option): 0.18 kW Roller conveyor drive (option): 0.8 kW NC positioning drives (option): 0.37 kW

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Bwjdpfx Anezrpl Demjr Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, power: 4 kW (5.44 HP), cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,000 mm, total width: 1,300 mm, total height: 1,500 mm, overall weight: 800 kg, Equipment: saw blade guard, No. 3276 Sliding table saw Kölle K 45 Used Max. saw blade diameter 400 mm Max. cutting height 145 mm Cutting width 1250 mm Motor power 4 kW Speeds 2800 / 3600 rpm Manual saw blade tilt 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Cross-cut table length 800 mm, extendable to approx. 1200 mm Stop rail 2000 mm long, with 1 stop Adjustable overhead saw blade guard Transport dimensions approx. 2000 x 1300 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Bjdpfx Anszbu Evemewr Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES Bwsdpfozrnt Hox Anmor – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport packages [pcs.]: 8 Bwedpfjx R A Ufox Anmjr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, total length: 1,850 mm, total width: 1,050 mm, total height: 1,400 mm, Colour: Grey Weight: 500 kg Pulp saw Harwi 130 45 degrees  5,5kW - Documentation available: No - CE certificate present: No - Serial number: 130 S - Main motor power [kW]: 5.5 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 400 Bwedjzrm S Iepfx Anmor - Max. saw blade diameter [mm]: 450 - Table length [mm]: 1500 - Table width [mm]: 1050 - Min. adjustable angle [°]: 0 - Max. adjustable angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Power [kW]: 7.3 - Transport dimensions: 1850mm x 1050mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2019, CATALOGUE NUMBER 8030 TECHNICAL DATA - Track width 495mm Bjdezrmvmepfx Anmewr - Working width of the saw blade shaft 500mm - Max. blade diameter 500mm - Max. cutting height 170mm - Blade arbor diameter 80mm - Table dimensions 2170x950mm - Min. material length 740mm * Top: - Pneumatic pressure roller - Feed rollers/pawls, 2 rows - 2 smooth, metal feed rollers - Saw blade shaft - 3 smooth, metal feed rollers * Bottom: - Guide rail - Feed roller - Feed rollers/pawls - Track - Toothed feed roller, metal - Central lubrication, electric - Infinitely variable feed speed adjustment 2.5 – 24 m/min - Electric lifting of the machine body up/down, 0.55kW - Feed motor 5.5kW - Main motor 75kW - Dust extraction nozzle diameter 290mm - Overall dimensions L/W/H 2800x2100x2000mm - Weight 4250kg ADVANTAGES – Made in Germany – Control panel at eye level – Max. cutting height 170 mm – Multi-blade saw, used – Very good condition Net price: 78900 PLN Net price: 18786 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: Bwedpfezrmtlsx Anmer - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm Bsdpozrmrusfx Anmowr - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades Bodpfx Aszrmqwsnmowr - sliding pressure arbor, metal 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, output - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - blade cleaning - diameter of dust extraction nozzle 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German made – Floating blade – Laser 3 pcs – Blade cleaning – Additional sleeve for multi-blade saw – Pneumatically adjustable guide rail – Stepless speed adjustment – Used multi-blade saw, very good condition Net price: 136900 PLN Net price: 32595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations)