Used Crane Arm for sale (15,438)

Condition: used, Year of construction: 2017, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 21245 Specifications: Manufactured in 2017 Gjdpfx Agexai S Tebsil Høglunds X-Cab Epsilon M12 crane Work lights and rotating beacon In good working condition Ready for delivery Description:For sale: 2017 Høglunds X-Cab with Epsilon M12 crane.Equipped with work lights and rotating beacon.Reported to be in proper working order and ready for delivery. Model: 2017 Epsilon M12 Tømmerkran

Condition: used, Year of construction: 2016, Field of application: Freight transport Serial number: BJ1088S0xxxx Giedpfsxai T Rsx Agbsl Please contact ATS Norway for more information Please provide reference number upon request: 21246 Specifications: Certified until 05/2026 Manufactured in 2016 Jonsered J1088S crane Work lights and rotating beacon In good working condition Ready for delivery Description:For sale: 2016 model equipped with Jonsered J1088S crane.Certified until May 2026. Comes with work lights and a rotating beacon.Reported to be in proper working condition. Ready for delivery. Model: 2016 Jonsered J1088S Tømmerkran

Condition: used, Please contact ATS Norway for more information Gjdpevyf Uzofx Agboil Please provide reference number upon request: 19552 Specifications: Lifting capacity: 2.5 tons Span: 18 meters Remote control Ready for delivery Description:Munck overhead crane for sale.According to the owner, it has seen very little use since it was purchased in 2018.Equipped with remote control and a 2.5-ton capacity.Available for prompt delivery. Own weight: 4000 Model: Traverskran

Condition: used, machine/vehicle number: YS2R6X4000208xxxx, mileage: 570,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21884 Specifications: Delivered with valid EU approval Mileage: 570,000 km Gjdpfxjxy Et He Agboil Transmission: Automatic Retarder Euro 5, 620 hp Good tires JOAB hook system 20T hook Tow hitch VBG 6x4 Beacon bar Toolbox Bed Radio/CD Climate control/AC Maintenance performed by owner Ready for delivery Description:2013 Scania R620 hook truck.6x4 with JOAB equipment.Engine is leaking coolant.Ready for delivery and will be delivered with valid EU approval. Km: 570000 HK: 620 Technical approved: no EU-approved until: 25.09.2025 Own weight: 13080 Total Weight: 28000 Payload: 14845 Width: 255 Length: 850 Euro: 5 Model: R620 6x4 Krokbil. Leveres EU-godkjent Gearbox: Automatic

Condition: used, machine/vehicle number: YV2R0P0D5NA88xxxx, mileage: 330,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22080 Specifications: EU-approved until 18.11.2026 Model year: 2021 Mileage: 330,000 km (may increase slightly) Automatic transmission Crawler gear Euro 6 Bergfegen body from 2016, ExTe A9 2.8 m Aluminum rims Length: 1,070 cm Width: 255 cm Wheelbase: 460 cm Curb weight: 15,960 kg Drivetrain: 6x4 Power: 751 hp Gjdpjx Izq Tefx Agbjil LED light bar Sleeper cab Radio/CD Climate control / A/C Crane specifications: Model year: 2019 Epsilon M12 Electric control with mini joysticks Water heater Reach: 8.3 meters Description: 2021 Volvo FH16 750 timber truck.The truck is recently EU-approved and currently in daily operation, so mileage may increase slightly.Equipped with a Bergfegen body from 2016 and an Epsilon M12 crane from 2019.Available for delivery on short notice. Km: 330000 HK: 750 Technical approved: Yes EU-approved until: 18.11.2026 Own weight: 15960 Total Weight: 32000 Payload: 15965 Width: 255 Length: 1070 Euro: 6 Model: FH16 750 6x4 Tømmerbil m/ Epsilon M12 kran Gearbox: Automatic

Condition: used, machine/vehicle number: YV2J4DAC72A54xxxx, mileage: 540,000 km, Year of construction: 2001, Please contact ATS Norway for more information Please provide reference number upon request: 21881 Specifications: EU-approved until 06.06.2026 Mileage: 540,000 km Transmission: Manual Engine brake 6x2 Good tyres Full air suspension Rear support legs Platform length: approx. 6 m Palfinger PK 23002 (2006 model) Remote control Front and rear support legs Euro 3 Side boards included Sleeper bunk Radio/CD Climate control/AC Service done by owner Video available Ready for delivery Description:Volvo FM12 crane truck from 2001, equipped with a 23 t/m Palfinger crane from 2006.The truck is EU-approved and ready for delivery. Gijdpfx Agjxy Etaobel Service and maintenance have been performed by the owner. Km: 540000 HK: 420 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 9540 Total Weight: 27000 Payload: 17385 Width: 255 Length: 960 Euro: 3 Model: FM12 6x2 Kranbil m/ 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, mileage: 825,000 km, Year of construction: 2008, Please contact ATS Norway for more information Giodpfx Asx S Urfegbel Please provide reference number upon request: 22123 Specifications: Not EU approved Mileage: approx. 825,000 km Transmission: Automatic Retarder Full air suspension JOAB body Sand spreader Tires (see photos) Trailer hitch VBG coupling 6x2 Euro 4, 560 hp Wheelbase: 450 cm Extra lights 2 bunks Services performed by owner Ready for delivery Description: Scania R560 6x2 hook truck.The vehicle is not EU approved and will not be approved prior to sale.Services have been performed by the owner.According to the owner, there is an air leak. Km: 825000 HK: 560 Technical approved: no EU-approved until: 05.05.2023 Own weight: 12740 Total Weight: 27000 Payload: 14185 Width: 250 Length: 850 Euro: 4 Model: 2008 Scania R560 6x2 krokbil

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 401,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Gedpowi Ryaofx Agboil Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: used, machine/vehicle number: YV2ASW0C88A65xxxx, mileage: 652,000 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 20301 Specifications: Km: Approx. 652,000 Transmission: Automatic Air suspension Engine brake JOAB on construction 20T hook Trailer hitch VBG Euro 4 Tires (see pictures) Hydraulic underrun barrier Grill Godpfewi R D Eex Agbeil Extra light Rotor beam 2 years Radio/CD Air conditioning/AC Maintenance done by owner Ready for delivery Description:Volvo FH480 Hook truck from 2008.Ready for delivery.Sold without box. Km: 652000 HK: 480 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 12960 Total Weight: 27000 Payload: 13965 Width: 255 Length: 880 Euro: 4 Model: FH480 Krokbil Gearbox: Automatic

Condition: used, machine/vehicle number: YS2R6X2000122xxxx, mileage: 600,000 km, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 20740 Specifications: Giodpfx Aowvy Itsgbol Km: Approx. 600,000, printer has been replaced Manual transmission Suspension: Steel - Air Tires (see pictures) 20T hook w/knuckle Multilift superstructure Trailer hitch Bed Ready for delivery Notes: Driveable on the surface, doesn't pull uphill as it should Some costs must be calculated here. Km: 600000 Technical approved: no EU-approved until: 10.06.2022 Own weight: 11500 Total Weight: 29000 Payload: 17425 Width: 250 Length: 820 Euro: 2 Gearbox: Manual

Condition: used, machine/vehicle number: YS2G8X2000571xxxx, mileage: 24,226 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21494 Godpfx Aexlbb Dogbsil Car specifications: 2024 model 24,226 km First registered: 06.12.24 560 hp Automatic transmission Euro 6 8x2 2 hydraulic boat supports L ft on 2 and 4 axle Suspension: Full air Onspot Heating in the house Hydraulic extension of 1 meter on level Tool cabinet Air conditioning/ac Radio Light Extra light Ready for delivery   Crane specifications: 2023 HMF crane Certified to: 07/25 50 hours/month 6 Hydraulic extensions on main crane 5 Hydraulic jibs Extra hydraulics all the way forward 4 support legs 20 t front leg 100% Load 360 Remote control Range of 21.4 meters Ready for delivery   Description: We have a powerful and well-maintained crane truck for sale - a 2024 Scania G560 8x2 pusher crane truck w/ onspot, 2023 50t/m HMF crane w/ extra hydraulics and jib. Both the truck and the crane function as they should, according to the owner. This is a rough skin of a crane truck. The vehicle is well maintained and is fully equipped for demanding missions. The car can be delivered by arrangement. Km: 24226 HK: 560 Technical approved: Yes EU-approved until: 06.12.2026 Own weight: 21300 Euro: 6 Model: G560 Gearbox: Automatic

Condition: used, machine/vehicle number: XLRAE45GF0L41xxxx, mileage: 180,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Godpfxoxu Aw Ej Agbsil Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic

Condition: used, machine/vehicle number: YV2XTY0C3JA83xxxx, mileage: 201,689 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21480 Car specifications: Gisdpfx Agjxkt Iyjbjl 2018 model 201,689 km PTO Hours: 1862 I-shift 469 hp Euro 6 6x2 Lift and swing on 3 axles Tires (see pictures) Internal length plan: 6,368 m Internal width plan: 2.491 m Stakes not included Pallet forks not included New towbar (2024) Chassis treatment Services taken in-house at your own workshop Air conditioning/ac Radio Light Ready for delivery   Crane specifications: 2018 model 2620K-RC HMF crane 26 hours/month Certified to: 03/26 6 hydraulic extensions 1 Manual Remote control 17 m range Ready for delivery   Description: We have a 2018 Volvo FM460 6x2 Crane truck w/ 2018 26t/m HMF crane for sale. The car is in daily use and the mileage will increase slightly. Everything works as it should according to the owner. However, errors and defects may occur as the car is from 2018. All services have been carried out at the owner's own workshop. The car has little rust and has been underbody treated. The trailer in the picture can be included if desired for an additional price. Ready for delivery. Km: 201689 HK: 469 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 14400 Euro: 6 Model: FM460 6x2 Kranbil m/ 2018 26t/m HMF kran

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. Gjdpfjwphixsx Agbeil - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: used, machine/vehicle number: YY9PV20KT7P01xxxx, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 20843 2017 Nor-Slep 2-axle hooklift trailer with tipping function Currently banned from use (not EU-approved) Extendable drawbar Various extra lights Air suspension BP axles Total length: 910.4 cm Godpfx Ajwvzaksgbeil Width: 255 cm Axle distance: 182 cm Tires in acceptable condition   One CMT hooklift container from 2016, each 13.5 m³ Technical approved: no EU-approved until: 27.04.2025 Own weight: 4350 Model: 2 akslet krokhenger med tipp

Condition: used, machine/vehicle number: YV2RT60GXLA85xxxx, mileage: 151,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 21593 Specifications – truck: Gijdexp Amcepfx Agbsl Mileage: Approx. 151,000 km Transmission: Automatic Full air suspension Engine brake / retarder 8x4 with steering on 4th axle Euro 6, 551 hp 100% front outrigger Flatbed length: approx. 5.8 meters Extension: 50 cm Total length with extension: 6.3 m Boat supports Combo truck – flatbed and fifth wheel included Webasto heater in top cabinet Tow hitch Post rack VBG coupling Remote control for both crane and truck Truck is remote-controlled Includes 2 short sideboards Metalized superstructure Rear support legs Toolboxes Microwave in external cabinet Lightbar (rotating) Camera system License plate box in front Bed Fridge Radio/CD Climate control / AC Full service contract (Gold agreement) Specifications – crane: Fassi F545RA from 2020 Certified until 08.2026 Support legs Remote control Reach: 28.2 meters Jib Winch Load chart 6 + 6 + 1 extensions Description:Volvo FH540 Tridem combo truck from 2022.The vehicle has been under a full (Gold) service contract since new.Sold with flatbed and fifth wheel.Equipped...

Condition: used, machine/vehicle number: ZN3D070D70904xxxx, mileage: 150,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21965 Specifications: - Eu-approved until 06.05.2026 - Km: Approx. 150,000 (may increase) - Transmission: Automatic - 4x4 - Engine brake - Length plan: 4.26 m - Trailer hitch Gijdpfox A R Nrjx Agbjl - Palfinger PK7.501 SLD C crane - Remote control - Crane diagram - Crane reach: 11 meters hydraulic - Approved until 07.26 - Tool cabinet - Euro 6, 180 hp - Good tires - Radio/CD - Air conditioning/AC - Service agreement with Iveco - Delivery by agreement Description: Iveco Crane truck with four-wheel drive. The truck is equipped with a 7.5 t/m Palfinger crane. Both truck and crane are approved. delivery by agreement. Km: 150000 HK: 180 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 5130 Total Weight: 7000 Payload: 1795 Width: 230 Length: 750 Euro: 6 Model: 70W 4x4 Kranbil m/ Palfinger PK7.501 Gearbox: Automatic

Condition: used, mileage: 196,000 km, Year of construction: 2018, Serial number: YV2XZX0C9JA82xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Gearbox: I-Shift Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Rotating beacon bar Extra lights Sleeper bunk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Gsdpfsxr Tvmsx Agbeil Km: 196000 HK: 459 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Condition: used, machine/vehicle number: YV2RT60G3JA83xxxx, mileage: 136,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 - Okay tires Gjdpfx Aox Izrkjgbeil - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2026 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Model: 2019 Volvo FH540 8x4 Tridem Kranbil m/ 50 t/m HMF kran m/ Jibb. Lite km og krantimer! Gearbox: Automatic

Condition: used, machine/vehicle number: VF611J160GD00xxxx, mileage: 450,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21660 Specifications:• Km: 450,000• Transmission: Automatic• Suspension: Steel front, air rear• Euro 6, 388 hp• Engine brake• Platform length: Approx. 6 meters• 4x2• Tow hitch• Clutch and catalytic converter replaced around July 2024• Palfinger PK 19.001 SLD• Delivered fully certified• Reach: 14.5 meters• Crane hours: 1,150• Crane diagram• Remote control• Support legs• Rotating beacon bar• Tires (see pictures)• Bed• Serviced twice a year• Radio/CD• Climate control / AC• Ready for delivery Gijdpjxq Dbqefx Agbel Description:Renault T380 6x2 crane truck from 2016.Both truck and crane are delivered with new approval.Equipped with a 19 t/m Palfinger crane.Serviced twice a year. Km: 450000 HK: 387 Technical approved: Yes EU-approved until: 11.08.2026 Own weight: 11890 Total Weight: 22000 Payload: 10035 Width: 255 Length: 952 Euro: 6 Model: Renault T380 6x2 Kranbil m/ 19 t/m Palfinger Gearbox: Automatic

Condition: used, operating hours: 4,500 h, Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Giodpfx Aexvlc Togbol Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500

Condition: used, Year of construction: 2019, operating hours: 2,000 h, Please contact ATS Norway for more information Please provide reference number upon request: 21753 Specifications: Model year: 2019 Hours: approx. 2000 Base ballast Remote control Counterweights: 3 × 3600 kg and 6 × 1100 kg Hook height: 30 m (3 × 10 m sections) Jib length: 55 m Giodpfx Agsxvlh Nebjl Undercarriage: stationary on ZD4230 Hoisting winch: 25LVF 15 Optima Trolley winch: 6 DVF 4 Optima Slewing mechanism: RVF 152 Optima+ Last assembled: 2022 Without cab Hours: 2000 Own weight: 111 Model: MDT 109 2C Tårnkran

Condition: used, Year of construction: 2019, operating hours: 340 h, Please contact ATS Norway for more information Please provide reference number upon request: 21806 Specifications: Delivered certified Model year: 2019 Hours: 340 Boom length: 30.7 metres Hook height: 29.8 metres Lifting capacity: 1500 kg 1 extension Crane diagram Remote control Description:Klaas trailer crane with a hook height of 30 metres.It has only 340 operating hours and will be delivered certified.Can be delivered at short notice. Gijdpexw Nlhsfx Agbsl Hours: 340 Own weight: 1 Model: K21-30 Byggekran. 340 timer!

Condition: used, mileage: 820,000 km, Year of construction: 2005, Serial number: YS2P6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: EU-approved until 30.07.2026 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Giedpfx Agexg Abnebel Rotating warning bar Tow hitch Rearview camera Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Krok/kranbil 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: YS2P6X2000556xxxx, mileage: 150,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21679 Specifications: EU approved until 21.11.2025 Model year: 2019 Mileage: approx. 150,000 km Opticruise Tires (see pictures) 2019 Joab body Remote control for body Autoline C50 sand spreaders Fuel type: Gas Euro 6 Length: 874 cm Width: 255 cm Wheelbase: 435/135 cm Curb weight: 14,200 kg Max payload: 13,725 kg 6x2 Gsdpfx Aoxr Tw Djgbeil 340 hp Rear-view camera LED bar Bed Radio/CD Climate control/AC Description:Scania P340 6x2 skip loader from 2019.Equipped with Joab body with space for two containers.Regularly serviced.Delivery by agreement.See video! Km: 150000 HK: 340 Technical approved: Yes EU-approved until: 21.11.2026 Own weight: 14200 Total Weight: 28000 Payload: 13725 Width: 255 Length: 874,2 Euro: 6 Model: P340 6x2 Liftdumper m/ Joab påbygg SE VIDEO Gearbox: Automatic