Used Corner Cutting Machine for sale (85,321)

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Hsdpfxex R U E Nj Ah Njng Cartridge pulse filter system User interface control works with Gleason Summary

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Hnjdshv U Tijpfx Ah Nog Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2011, functionality: fully functional, Perfecta SA 110 APK paper jogger year 2011 Hnedpfx Aox R R Rush Nog pneumatic flaps left and right air removal roller

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Control Unit Brand ESAB Model EPP-360 Vis 51 Main Drive Spindle speed range 50.8–25000 mm/min Hedpfox R E Smex Ah Nong Number of axis 3 This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 1982, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm Hsdpfjx Igxvjx Ah Neng wire feeding speed: 29 - 90 mtr./min

Condition: good (used), Year of construction: 1998, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 800051, The machine was used in our office environment to cut open multi-page, staple-bound questionnaires prior to scanning. The exact year of manufacture is unknown. We have been using the device since around 1998. In recent years, it has only been used occasionally. Since the device does not have a counter, the indicated figure is only a non-binding estimate. The device is located in our old building office on the first floor. The staircase is sufficiently large, but there is no elevator. Transport or collection must be arranged by the buyer. An additional newly-sharpened second blade is included with the device. Hnodpfjx Thlzex Ah Nsg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 339, type of input current: three-phase, sheet thickness (max.): 12 mm, working width: 1,500 mm, working length: 3,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: An excellent plasma cutting machine from the renowned manufacturer STIGAL, model DYNAMIC SPEED with a power of 5500W. Manufactured in 2014, powered by 400V. Serial number 339. CUTTING MACHINE IN CONTINUOUS OPERATION, REGULARLY SERVICED Fully operational! Technical parameters of the STIGAL DYNAMIC SPEED plasma cutter: Working area (L x W): 3000 x 1500 mm Positioning accuracy: +/- 0.05 mm Travelling speed: 22 m/min Maximum power consumption: 5500 W Inspection welcome Hnsdpjx Tg Smefx Ah Neg

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Hnodpfx Aog Dgbheh Njg Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: good (used), Year of construction: 2004, functionality: fully functional, Perfecta PT10P, pile turner, year 2004, size 800 x 1,290 mm, pile height 1,400 mm, standard equipment. Hnodpsx R R Rbjfx Ah Njg

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Hnjdpox R E Nljfx Ah Nog Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm Hodoc Ucxfspfx Ah Nong cutting length: max. 2.000 mm wire feeding speed: 5 - 120 mtr./min * machine is been complete new painted*

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Hnodpfx Ahev Hxbbj Neg

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Hsdsxwnxgjpfx Ah Nong Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 388 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Hnsdpfx Ajx Tft Ajh Neg

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Hnjdpfx Ajg N Nlvoh Nog Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Year of construction: 2006, condition: ready for operation (used), This TRUMPF TRUMATIC L3030 was manufactured in 2006. It features a 2700 kW CO2 laser and Siemens CNC control, handling board sizes up to 3000x1500 mm. Consider the opportunity to buy this TRUMPF TRUMATIC L3030 CO2 laser cutting machine. Contact us for more information. Application Types Cutting Hedpfjx R E Rpsx Ah Njng

Condition: excellent (used), Year of construction: 1983, wire diameter range: 2,5 - 7,0 mm cutting length: max. 4.000 mm wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000* Hedpfx Ajfkx Treh Nong

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 working area 2050 Rmax. Hjdpsu Ag Raefx Ah Neng working area 500 Rmin. table surface area 900 mm engine output 3,0 kW weight ca. 250 kg

Condition: excellent (used), Year of construction: 1985, wire diameter range: 1,5 - 7,0 mm cutting length: up to 8.000 mm wire feeding speed: 29 - 90 mtr./min Hnsdemt A Svopfx Ah Neg

Condition: used, Year of construction: 2017, table width 3000 mm Hjdpfxjucpnle Ah Njng table length 1500 mm burner heads 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38mm Maximum: 44mm Separating cut: 57mm Piercing: 25mm Output current: 30-125A Mains connection: 400v-36A Compressed air requirement: 260l/min Air pressure 5.9bar Dimensions: 592 x 274 x 508 mm Weight: 49kg

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage Hnjdpfx Ahsg N Nl Is Nsg - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables Hedpfxsgvq D Us Ah Neng - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Hnedpopm U U Nsfx Ah Nog Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: new, Year of construction: 2024, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 1500 kg traversing speed 200 m/min total power requirement 55 kW dimensions of the machine ca. 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 40 mm Hnedpfou Dpb Rjx Ah Nog STAINLESS STEEL 40 mm ALUMINUM 40 mm BRASS 16 mm

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head Hsdpfeg N Nl Dsx Ah Njng - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm