Used Copy Device for sale (11,885)

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Hsdpfx Aheyty E Eevoni Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out!

Condition: new, Year of construction: 2022, Suction nozzle diameter: 180mm Nominal volume flow: 4200 m³/h Scavenging bag volume: 2 x 175 l Filter cleaning: manual Motor power: 3.8 kW / 400V Machine height: 1700 x 600 x 2400 mm (L x W x H) Weight: 69 kg Hedpfod Txbljx Ahvsni

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Hnedpfx Ahjwhuufovoi Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Hjdpfxjya Hl Eo Ahvsni Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: good (used), Year of construction: 2018, Internal item no.: 25119 Mobile Surface Roughness Tester Mahr Marsurf PS10 Hodpfxsyqzwkj Ahvsni Year of manufacture: 2018 The measuring device is fully functional and can be inspected under power by appointment in a heated storage area of over 500 m².

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Hjdpfxeyqr Sxs Ahvsni

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Hodpfx Ahsytr Swevjni Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. Hjdpfx Asytn Hkshveni For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Hedeypw Hrepfx Ahvjni Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servo motor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm Hedpsv Hxw Ajfx Ahvoni -Shaft: Ø 20 mm -Number: 4x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece

Condition: new, functionality: fully functional, turning diameter: 370 mm, Device for copying original parts or according to a template Stepless spindle speed control enables optimal adjustment to the workpiece High spindle rotational accuracy Robust cast iron construction ensures vibration-free operation High-quality belt drive provides optimal power transmission to the spindle Quick-action lever enables easy locking of the tailstock on the bed Digital spindle speed display included in the delivery scope Technical Specifications Centre distance: 1100 mm Swing over bed: 370 mm Copying turning diameter*: 160 mm Spindle speed min.: 500 rpm Hjdpfx Asytc R Rshvsni Spindle speed max.: 2000 rpm Number of speed ranges: stepless Spindle thread: M33x3.5 Tailstock taper: MK 2 Tailstock quill travel: 50 mm Copying length: 850 mm Motor power: 1.1 kW Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions - width: 1650 mm Dimensions - depth: 750 mm Dimensions - height: 1150 mm Weight approx.: 92 kg Scope of delivery 300 mm tool rest 150 mm faceplate Rotating live centre Drive centre Copying device Basic tools Base

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Hnedpfx Ahevkdkiovji Year of manufacture: 2005 Power: 3.1 kW

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Hedpfjxzuxnox Ahvjni Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total length: 700 mm, total width: 450 mm, total height: 1,350 mm, machine/vehicle number: 101, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operating pressure: 6 to 7 bar MACHINE DETAILS Serial number: 101 Length: 700 mm Width: 450 mm Height: 1,350 mm Weight: 100 kg Hnodpfxeyn Epro Ahvoi EQUIPMENT Base frame

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 105, total height: 1,200 mm, total length: 900 mm, total width: 400 mm, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid requires timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Hnsdpeyn Epfefx Ahvsi Pressure: 6/7 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT Base frame External reference: Groven – Lot 15

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; Hjdpfx Asp Stgnohveni - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Hedpoh Aw Rnsfx Ahvsni Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 08649020, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Hedpeyn Eb Uefx Ahvjni MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Weight: 10 kg External reference: Lot 18 / L.Schaible

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 0500230, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Hodpsyn Aabofx Ahvoni TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 86

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 3820120600272, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 5.6 A Connected load: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg Hodpoynz T Hefx Ahvsni External reference: Pieper - Lot 87

Condition: ready for operation (used), Haimer Powerclamp Premium Shrinking Device Tool Shrinking Machine Haimer Powerclamp Premium Shrinking Device: Suitable for tools: Carbide (HM), Ø3 - 32mm, h6; HSS + extensions, 3 - 32mm, h6 Power consumption: 13 kVA Clamping/unclamping time: approx. 5 seconds Dimensions: approx. 1100mm x 860mm x 1300mm Weight: approx. 100 kg Year of manufacture: 2014 High-Performance Cooling Unit Speed COOLER: Hnodpoyr Ntvefx Ahvei Power consumption: 1 kVA Cooling time: 20 to 150 seconds Dimensions: 565mm x 440mm x 335mm Weight: approx. 45 kg Year of manufacture: 2014 Total dimensions with trolley: 860mm x 1100mm x 1900mm Weight with trolley: approx. 155 kg You are welcome to view the machine on site. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Prior sale reserved. Visit our shop for more offers and additional products. All company names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations in technical data and errors in the item description may occur and are subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 600 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,000 mm, total width: 1,900 mm, warranty duration: 12 months, tank capacity: 2,000 l, MIXER 2000L The mixing auger is driven by a three-phase, 4-pole electric motor with trapezoidal belt transmission. Hnodpfxjyrz Ewo Ahvji The range includes sizes from 500 to 20,000 liters.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) Hnedoyc Nzuspfx Ahvei • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Hnjdjxtwxuopfx Ahvoi

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany Hodpsxn Awxefx Ahveni • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.