Used Cooling Tower for sale (7,838)

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Iodpfx Aqjyvrvpeujic Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Iijdpfxeynkbmo Aqusc

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Iisdpfevzw H Ejx Aquoc Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward • infeed left at the top Iijdpfed Ert Ssx Aqujc

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Iedpfxev E Rage Aquoic

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Iodpfxeui R Sme Aqujic

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Iedpfxexz Ex Ss Aquoic Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: RAD 864/900 - AB49038, cooling capacity: 1,113 kW (1,513.26 HP), type of input current: three-phase, type of cooling: water, overall weight: 8,449 kg, input voltage: 400 V, pressure: 6 bar, temperature: 21 °C, volume flow: 192 m³/h, pump pressure: 3.27 bar, total width: 2,124 mm, total length: 6,600 mm, total height: 3,180 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Cooling Tower, air-cooled Type: Cooling Tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD units are complete compact water cooling towers suitable for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, and control and switch cabinet. Cooling capacity kW: 1113 Chilled water temperature outlet/inlet °C: 27 / 32 Flow rate m³/h: 192 Available pump pressure Bar: 3.27 Wet bulb temperature °C: 21 Iisdpfxjwmb T Es Aqusc Air flow rate m³/h: 97,200 Sound pressure at 10m (free field) dB(A): 64 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Length mm: 6,600, Width mm: 2,424, Height mm: 3,180 Weight (transport/operating) kg: 4,194 / 8,449 Connection DN 150 Reference: AB 9038 Year of manufacture: 2024 Condition: Visual 1, Technically OK & tested Test facility, as new Price: on request in Euro (plus VAT ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0430.020 / 21143, type of input current: three-phase, power: 22.3 kW (30.32 HP), input current: 42 A, We are offering a refrigeration unit from ef cooling. This unit was used to cool a Bystronic laser cutting machine. Regular maintenance was always performed. The unit can also be used as a source of spare parts, so individual parts can also be purchased. Isdpfxjzdytis Aqusic We have another identical unit in stock, so two of this type can be purchased.

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iiodeul In Ropfx Aquec

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Iodjyb Sdiepfx Aqueic

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Iisdjyb Rquopfx Aqujc Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Iisdpfx Aqjyf Hlisujc Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: used, functionality: unexamined, For sale: Area Cooling Solution unit Model: APTXN-12; Refrigerant receiver type AR-10l; Bristol compressor No. H79A723D8EA OC52; Isdpjyt I N Sjfx Aquoic Net price: 470 Euros, negotiable.

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Iodpfx Aoxlkg Ajqueic Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Iedpfowxlmajx Aqujic

Condition: new, Year of construction: 2024, mast type: telescopic, lifting height: 2,000 mm, color: orange, General information Year of manufacture: Jan 2024 Technical information Drive: Wheel GVW: 275 kg Dimensions (LxBxH): 118 x 74 x 167 cm Functional Lifting capacity: 125 kg Working height: 400 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Iijdpsraz N Defx Aquec Please contact Ernst van Hek for more information

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approx. 60 g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3 phases, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Isdpfxjzardto Aqueic Evaporator surface: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrosting interval: sequential Heating in the pan: hot gas Control and switchgear cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switchgear cabinet: Stainless steel on stainless steel base Temperature display: at least 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drain outlets Under-freezer protection heating with reserve circuit Base temperature sensor with reserve sensor 4 separate evaporator units with one fan each Evaporator tubes made of stainless steel Evaporator housings made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting in stainless steel block Sequential defrosting Inspection flap in the fan box Remote maintenance Ethernet

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a vertical metal sheet storage system, the STOREMASTER Rolly Tower, complete with an ABUS crane and a vacuum sheet lifting device. The equipment is used, in very good condition, and has seen limited use. It is currently disconnected, but the entire system is complete. The storage system is designed for efficient storage of sheet metal, as well as for fast and safe loading and unloading of sheets. The shelves are manually retractable, and the sheets are moved using a crane with a vacuum lifting device. Technical specifications: Manufacturer: Storemaster Model: Rolly Tower Year of manufacture: 2012 System dimensions (L × W × H): 4200 × 1700 × 4360 mm Sheet dimensions: up to 3000 × 1500 mm Maximum shelf load: 3000 kg Isdpfxjzfglns Aqueic Number of shelves: 13 retractable shelves Additional storage space at the top: 4 Crane: ABUS Crane lifting capacity: 500 kg Vacuum lifting device lifting capacity: 250 kg Jib length: 6000 mm Total system weight: approximately 10,000 kg Total electrical power: 4 kW Advantages: Compact vertical storage High storage density Fast sheet access Safe loading and unloading of sheets ABUS crane included Vacuum sheet lifting device included Robust industrial design Lightly used, very good condition Application: Ideal for metalworking, sheet metal production, ventilation, facades, roofing, metal structures, and other companies that require efficient sheet storage and fast material handling. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Here we offer an LDS cooling fan. LDS blower. Maximum speed: 2900 RPM. Power supply: 415V 3PH 50Hz. Iodpszfg Ntsfx Aquoic Type: V870 50Hz. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS cooling fan. LDS blower Maximum speed: 2855 RPM. Iijdpfx Aqezfg Nmouec Power supply: 415V 3PH 50Hz Type: V870 50Hz Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Active Cooling System We offer you an active cooling system here. Active Cooling System Type: EOL EMP 242 Condition: used Ijdpfxezd Uuzo Aqueic Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), mileage: 192,053 km, color: blue, lifting height: 30,400 mm, axle configuration: 4x4, Year of construction: 1998, operating hours: 25,341 h, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 35.850 kg Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Iiodpjzd T R Ijfx Aqujc Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Spierings SK365-AT3 * 1998 * 25,341 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 192,053 km * Includes documents and maintenance history

Condition: excellent (used), color: blue, lifting height: 20,300 mm, Year of construction: 2022, operating hours: 950 h, Drivetrain Drive: Wheel Weights Empty weight: 3.450 kg Functional Lifting capacity: 1.500 kg Dimensions of cargo space: 950 x 240 x 280 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: ES Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = MIDI LT 14.14 RD * 2022 * 950 operating hours * Electrically operated 230 VOLT * JIB horizontal or at 30 degrees * 14 meter hook height or 20.3 meter hook height * 14 meter horizontal reach or 12.3 meter horizontal reach * Maximum lifting capacity 1500 kg * Minimum lifting capacity 350 kg Iedpfx Ajzdr Avjqujic * Equipped with movers with Remote Control * Remote control * Hydraulic outriggers * 3440 kg own weight * Supplied with all documents

Condition: ready for operation (used), The machine can be used for connecting cooling channels using solid carbide (VHM) tools. Iijdoy Hcmyspfx Aqusc