Used Cooling Cell for sale (8,516)

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump Dodpfx Aioz Hckmelscn - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained cooling system from IKS Industrielle Kühlsysteme GmbH, year of manufacture 2016. The system operated without any issues until it was decommissioned in 05_2025 and received regular maintenance. If you have any questions or require further information, please send us a message or give us a call. Due to the size and complexity of the system, it is only offered for sale after a prior inspection. Dcjdpfxjyx Hb Ee Ailsn

Year of construction: 2014, condition: used, This listing is for a TTP Labtech Acumen ex3 Microplate Cytometer The unit is in full working condition and ready for immediate use This microplate cytometer is a high-quality lab instrument manufactured by TTP Labtech (Model: Cellista). A laser-scanning imaging system that offers rapid, high-throughput cellular analysis for drug discovery and life science research. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Dcsdpfxszugcxo Ailon Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example. Dcjdpfxjzhnrue Ailjn

Year of construction: 2018, condition: good (used), 2018-11-22 - Thermo Scientific HERAcell 150i CO₂ Incubator – Ref. 51026280 Dcjdpfx Aszhic Ujiljn Reliable 150 L CO₂ incubator for cell culture applications. 230 V version with an electropolished stainless steel chamber, providing a durable and controlled working environment. An excellent choice for laboratories seeking dependable incubation and the trusted quality of Thermo Scientific.

Condition: like new (used), mileage: 38,000 km, fuel type: gasoline, emission class: euro6, Year of construction: 2022, PIAGGIO PORTER NP6, year 2022, petrol/LPG, 38,000 km, refrigerated box with internal dimensions 2x1.50xH1.30 m, ATP FNA 0°, certificate valid until August 2028, single owner, national vehicle, financing or leasing available, 1-year warranty. Dcodox Dclhjpfx Ailen

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm Dsdpfx Aeh Nq E Seiljcn 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Dedpeh Txlcefx Ailscn Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: good (used), Year of construction: 1994, machine/vehicle number: 027/103, This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 Dcodsrgqnrspfx Ailen - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

Condition: used, functionality: fully functional, total length: 1,980 mm, total width: 1,890 mm, total height: 3,110 mm, The Fessmann Rotatherme roasting cell is an innovative piece of cooking equipment designed to meet the needs of professionals in the food industry. Thanks to its advanced technology, it offers both dry and moist cooking, enabling a wide variety of products to be prepared with exceptional quality. Indeed, this machine ensures uniform and precise cooking, guaranteeing optimal results with every use. What's more, the rotisserie cell incorporates a cart rotation system during cooking, enhancing the efficiency of the process and ensuring even heat distribution. What's more, its compact design makes it easy to integrate into even the most confined production environments. What's more, it keeps energy and water consumption under control, contributing to more economical and environmentally-friendly production. What's more, the rotisserie cell's ease of maintenance reduces downtime and increases the overall efficiency of your production line. When you choose the Fessmann Rotatherme rotisserie cell, you're opting for a reliable, high-performance solution that optimizes your cooking processes. As a result, you can increase productivity while maintaining high quality standards. In short, this equipment is a wise investment for any company wishing to improve its performance in the field of industrial cooking. Technical specifications: Type: Rotatherme Max. cooking temperature: 220°C Cart capacity: 1940 x 1040 x 1030 mm Dry and wet cooking Electrical heating power: 88 kW Total power : 92 kW Cooking water consumption: 70 L/h Humidification water consumption: 70 L/h Compressed air consumption: 80 L/h Dcodpfx Aieu Iagrelon Max. fresh air requirement from outside: 300 m3/h Dimensions: 1980 x 1890 x 3110 mm Cart rotation system during baking

Year of construction: 2017, operating hours: 500 h, condition: excellent (used), functionality: fully functional, Germany’s leading independent service provider offers: Newest model LPG Systems CelluM6 Alliance Beauty and therapy device Used device, few hours of operation; extremely well-maintained, all accessories included, including operating manual Newest world patent: for body and face Cabin device Like-new pump performance, see pictures List price: €45,900 net and immediately available Prices: net Optional delivery Optional training Leasing may be possible in Germany upon request. Dcodedgp Hxjpfx Ailsn

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. ⚙️ Technical Data Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Cooling capacity (L35 L35): 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Personal collection also possible We assist in organizing international transport Dedjyw Ndgepfx Ailocn

Condition: used, Alco twin shaft paddle mixer with cooling Model: AMP 1600 Dcsdpfx Aisy Algnelon Capacity: 1600 l Power: 15 kW Dimensions: 2800 mm x 1600 mm x 2100 mm

Condition: good (used), Year of construction: 2017, heating cooling device HB Therm 100 Z1 Serie 5 Wasser, 100°C 9 KW new Service ! (art.3179) year: 2017-2018 Dsdewhygyspfx Ailjcn price: 3.250 € contact: Mr. Rainer Eckerle

Condition: like new (used), mileage: 127,000 km, fuel type: gasoline, Year of construction: 2019, IVECO DAILY 50-14, year 2019, petrol/CNG, Category C licence, 127,000 km, refrigerated body 3.90 x 2.20 x H2 m (internal), movable partition wall, Thermo King refrigeration unit, ATP FRC -20°C valid until 11/2027, payload 1,300 kg, vehicle in like-new condition, 1-year warranty, financing or leasing available on site. Dsdsx Na Imspfx Ailecn

Condition: excellent (used), functionality: fully functional, Alco Twin-Shaft Paddle Mixer Manufacturer: Alco Power supply: 400 V Overall dimensions: 3500 × 1550 × 3000 mm Bowl dimensions: 1700 × 1050 × 900 mm Top inlet with pneumatic valve Bottom outlet with pneumatic discharge valves Digital parameter readout The Alco twin-shaft paddle mixer is a professional machine designed for intensive and uniform mixing of various food masses, especially in the meat industry. Its twin-shaft, paddle-based construction ensures high process efficiency and a homogeneous final product structure. Dsdpeyahw Aefx Ailscn The mixer is equipped with a pneumatically controlled top feed and a bottom discharge system, allowing for efficient operation and easy integration into production lines. Key advantages include a robust build and a large bowl capacity.

Condition: refurbished (used), functionality: fully functional, ACEA xCELLigence RTCA Cardio Parameter Value / Description Application / use Real-time monitoring of cardiomyocyte contractility and viability; cardiotoxicity assessment Well format 96-well (E-Plate Cardio 96) Sampling / temporal resolution Entire 96-well plate read in ≤ 12.9 ms (i.e. ~12.9 ms per full-plate sweep) Dcjdpfx Aisxiyfpolon Impedance measurement accuracy / Accuracy: ±1.5 % (at 1 Ω) (plus some offset) repeatability Repeatability: 0.8 % Impedance dynamic range 20 Ω to 2 kΩ Output test signal 22 mV rms ±20%, with a maximum 5 mV DC offset at 10 kHz (also stated for 10, 25, 50 kHz) Communication interface USB 2.0 (from analyzer to control unit) Power / electrical input (analyzer) 100–250 VAC, 50/60 Hz, 25 W max Physical dimensions / weight (analyzer) ~ 40.0 × 40.0 × 9.2 cm (W × D × H) weight:

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder Dcodpfx Aozu A Rxeilen * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Year of construction: 2017, condition: ready for operation (used), 2 units Thermo Scientific Heracell 150i CO2 incubators, No. 439 + 440 Internal dimensions: 450mm x 450mm x 600mm (W x D x H) External dimensions (per unit): 640mm x 820mm x 870mm (W x D x H) Year of manufacture: 2017 Temperature range: 3°C - 55°C Decontamination routine at 90°C. Dsdpfjywxqvox Ailecn You are welcome to arrange an inspection appointment. We can organise affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to view more of our listings. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the description of the item may occur; such errors and deviations are reserved.

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) Dsdpfjnr E Enjx Ailecn complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Dcedsyw N Irjpfx Ailen Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: used, mileage: 290,000 km, fuel type: diesel, Year of construction: 2019, IVECO EUROCARGO 180E32, YEAR 2019, EURO 6, 290,000 KM. IFAC refrigerated body, 6.30 x 2.60 x 2.45 m. Interior with rails and hooks for transporting hanging meat, with loading crane. Self-contained diesel THERMO KING T800 refrigeration unit with ATP FRC thermoregulator at -20°C. Valid until 2028, renewable. DHOLLANDIA tail lift with a capacity of 3,000 kg. Vehicle with 90% tire tread. Automatic transmission, air conditioning. Financing or leasing options available on site. Dcsdsz Dn Ncopfx Ailon

Condition: used, Year of construction: 2021, machine/vehicle number: 211014/8655, overall weight: 133 kg, total width: 697 mm, total length: 1,210 mm, total height: 1,350 mm, input voltage: 240 V, tank capacity: 200 l, input current: 12 A, input frequency: 60 Hz, Equipment: type plate available, Freddy ECOVAC 200 industrial coolant vacuum and recycling unit, manufactured in 2023 by Freddy Products Limited, United Kingdom. The Freddy ECOVAC is designed for vacuuming coolant from machine tool sumps, machine beds, drip trays, conveyors, and shop floors, while simultaneously separating metal chips and swarf and returning the cleaned coolant for reuse. Unlike a standard industrial vacuum cleaner, the ECOVAC is specifically designed for coolant recovery and recycling and uses an independent pump for coolant return. Technical data: Manufacturer: Freddy Products Limited Model: ECOVAC 200 Year of manufacture: 2023 Serial number: 230804/9440 Tank capacity: 200 liters Power: 3 kW Voltage: 240 V Power supply: single-phase Frequency: 50/60 Hz Input current: 13 A Empty weight: approx. 133 kg Dimensions: - Length: approx. 1,210 mm - Width: approx. 697 mm Dcsdpfxjz Dx Trj Ailsn - Height: approx. 1,350 mm Country of manufacture: United Kingdom CE marked UKCA marked Equipment and features: - 200-liter coolant tank - independent coolant return pump - 37-liter perforated steel basket - flexible suction hose - metal suction lance - wide floor suction nozzle - additional tools and hoses - mobile design with castor wheels - steel construction with oil- and acid-resistant powder coating Main applications: - CNC machining centers - lathes and milling machines - machine tool coolant sumps - production plants - maintenance departments - industrial workshops Advantages: - recovers and reuses coolant - helps reduce coolant consumption - removes chips and swarf from coolant - helps extend coolant life - reduces waste disposal costs - improves machine and workplace cleanliness - helps reduce bacterial growth and contamination in coolant systems Condition: Used machine in very good technical and visual condition. The unit is complete and ready for use. Inspection and functional test are possible before purchase. Sales information: VAT invoice available. Transport can be arranged throughout Poland and Europe after prior agreement. Additional photos, video, and transport quotation are available upon request.

Condition: used, functionality: fully functional, machine/vehicle number: 249, mileage: 99,080 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 2,930 kg, overall weight: 3,500 kg, tire size: 225/65 R 16 C, axle configuration: 4x2, wheelbase: 3,682 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2022, operating hours: 1,382 h, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, soot filter, start-stop system, traction control, trailer coupling, FIRST REGISTRATION: 03/25/2019 99,080 KMS ENGINE: 2.3 DCI 130 HP EURO 6 STANDARD AD BLUE PARTICLE FILTER 2-SEATER CABIN WHEELBASE: 3,682 MM ABS – ASR – ESP – BAS – AIRBAG 6-SPEED MANUAL GEARBOX CRUISE CONTROL ONBOARD COMPUTER AIR CONDITIONING RADIO MEDIA NAVIGATION ELECTRIC WINDOWS AND MIRRORS CENTRAL LOCKING TELESCOPIC PLATFORM, BRAND: KLUBB, TYPE: K32: CE STANDARD, YEAR 2019 BASKET: 1 PERSON, 120 KGS WORKING HEIGHT: 12.50 M FLOOR HEIGHT: 10.50 M MAXIMUM REACH: 6.80 M MAXIMUM WIND RESISTANCE: 12.50 M/S 1,382 HOURS OF USE Dcsdpfsz D U Aiex Ailjn TIRES: 225/65 R 16 C UNLADEN WEIGHT: 2,930 KGS GVWR: 3,500 KGS

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 Dcedpjz Enbbjfx Ailon :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side