Used Control for sale (47,082)

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Hsdozdd E Rspfx Agtsfl Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Year of construction: 2017, condition: excellent (used), functionality: fully functional, The four temperature control units are for sale; the price is per unit. All units have been in operation for less than 1000 hours, which we can document with a photo. Medium: Water Operating temperature: 140 degrees Heating capacity: 9 kW Hfodpfoznlffjx Agtjl Cooling capacity: 40 kW

Condition: like new (used), The RJG eDART® is a process monitoring and process control system for plastic injection molding machines. It captures machine, mold cavity pressure, and temperature signals, among others. This allows the injection molding process to be monitored, process variations to be detected, and defective parts to be automatically sorted out. The core eDART unit is the process controller, or the system's base hardware. Various RJG-Lynx sensors and input/output modules can be connected to it. Hfjdjyr Ec Topfx Agtsl Notably, RJG continues to support eDART software versions 9 and 10 and provides manuals for these versions. There are various expansion levels available, such as flx, conx, and apex, ranging from part monitoring to more extensive process control.

Condition: used, Year of construction: 1999, turning diameter 1010 mm turning length 6000 mm control Siemens type Sinumerik 840D turning diameter over slide rest 650 mm 3-jaw chuck Schunk Rota Plus 3-jaw-chuck diameter 500 mm bed width 750 mm steady 820 mm Rotating speeds 1100 U/min length of gap 500 mm steady 450 mm spindle passage 104 mm workpiece weight 7000 kg main drive 52 kW turning speeds 5-900 U/min total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Hfedpfx Agoyqu Uiotjl Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification Hfedpszzlhaefx Agtsl • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 2160 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Hfsdpjzpbcvofx Agtol Cutting area: approximately 5300 mm in length 2160 mm in height Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Location: arriving in week 33 at warehouse 54634 Bitburg.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Hjdjzx N Thspfx Agtjfl Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: like new (used), Siemens control, very complete set Shop Turn! System was installed on demo lathe, run only few hours. Complete as on pictures with cables and 2 motors (axis). Packing and loading not a problem. Hfoderlku Hspfx Agtsl

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg Hsdjzy Hx Dspfx Agtefl EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65086, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC530, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,900 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 700 mm Spindle speed: 6,000 rpm Tool interface: SK40 Number of tool magazine positions: 24 Hfedpfjz Apdnox Agtjl MACHINE DETAILS Control system model: Heidenhain TNC530

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 Hfodozgigdjpfx Agtsl -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: PXI-8108, controller model: PXI-8108, National Instruments PXI-8108 Embedded Controller, in fully functional condition. Hfsdpszh Hxgjfx Agtsl Manufacturer: National Instruments (NI) Model: PXI-8108 Condition: Used – MAX Tested and Functional Operating System: Windows 7 RAM: 1 GB Storage: 500 GB Samsung SSD Interface: PXI This high-performance PXI embedded controller has been thoroughly tested and inspected – maximum performance in all functions is confirmed. Windows 7 is pre-installed and fully functional, making it ideal for older industrial and laboratory systems that require Windows 7 compatibility. The 500 GB Samsung SSD provides expanded storage capacity. Removed from a working industrial environment; no faults or anomalies found. Shipping from Hungary. International shipping available. Carefully packaged for safe delivery. Please contact us if you have any questions!

Condition: used, MITSUBISHI MDS-B-SP-260 Servo Amplifier Servoverstärker CNC For sale is a Mitsubishi Electric MDS-B-SP-260 Servo Amplifier from a working CNC machine. The unit was removed from a working machine and is offered as a used replacement part. Technical Data: Manufacturer: Mitsubishi Electric Type: MDS-B-SP-260 Design: Servo Amplifier Application: CNC machines / servo drive systems Hjdpfx Agez Auqajtefl Connectors: CN1A, CN1B, CN4, CN5, CN6, CN7, CN8, CN9, CN20 Power terminals: U / V / W Additional terminals: L+, L-, L11, L21 Condition: Used condition with visible signs of use, dirt, scratches and age-related wear. Please carefully inspect the pictures, as they are part of the item description. Scope of delivery: 1 × Mitsubishi MDS-B-SP-260 Servo Amplifier, exactly as shown in the pictures. Suitable as a replacement part, exchange unit or for spare parts inventory for CNC machines.

Condition: like new (used), 5 units of safety light barriers Hodpjzrfp Sjfx Agtofl Light curtains Manufacturer: Datalogic Automation S.r.l. Series: SG4 Base Type: SG4-30-120-OO-X Protection class: IP65 Power supply: 24 V DC ±20% Range: up to 20 m Resolution: 30 mm Protective field height: approx. 1,200 mm (type designation “120”) Standards/Certifications: CE, UL

Condition: used, Year of construction: 2007, Maximum workpiece length: 4,200 mm Maximum workpiece thickness: 100 mm Number of slitting spindles: 2 Number of profiling spindles: 3 Horizontal spindles: 3 Horizontally controlled spindle Separate gear spindle Cut the flange Hfsdjz A Enmepfx Agtjl Slitting spindle length: 600 mm Profiling spindle length: 600 mm Synchronized spindle length: 600 mm Gear spindle length: 80 mm Constant stroke height: 40 mm Total spindle stroke: 540 mm Spindle diameter: 50 mm Tool orbit circle for profiling: 220 mm Tool orbit circle for slitting: 350 mm Continuous spindle stroke Radial spindle adjustment, pneumatic Electronically controlled longitudinal stop Angled window Adjustment to minimize miter gap Chip guard during folding, synchronized spindle Workpiece return: Longitudinal conveyor Main motor: 11 kW Maximum feed rate: 90 m/min Feed rate, continuously adjustable Control: Program control Control: PC control Compliance marking: CE mark

Condition: good (used), mileage: 1,164,442 km, power: 412 kW (560.16 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2013, Equipment: AdBlue, Bluetooth, EBS, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - EPS (Electronic Power Steering) - Low-noise - Air horn - Particle filter - Radio/CD player - Sunroof Hfedpfsz A Ii Tsx Agtol - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox = Further Information = Axle Configuration Suspension: Air suspension Front axle: Steerable; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Lift axle; Steerable; Tire tread depth left: 50%; Tire tread depth right: 80% Rear axle 2: Tire tread depth left: 80%; Tire tread depth right: 80% Weights Unladen weight: 9,111 kg Payload: 17,389 kg GVWR (Gross Vehicle Weight Rating): 26,500 kg Maintenance, History and Condition APK (Technical Main Inspection): Valid until 07.2027 Technical condition: good Optical condition: good Identification Reference number: 13 Vehicle number: 13 Scania R560 V8 / 6x2 / Steerable + Lift Axle / Euro5 .: YS2R6X20005314717 German vehicle TÜV (Technical Inspection): 07.2027 - Inspection Report Date: 01.2027 Transmission: Automatic Suspension: Air / Air (Full Air Suspension) Air conditioning Engine brake Cruise control Cooler box Auxiliary heater Steerable + Lift Axle Euro 5 No liability for printing and typographical errors, changes, prior sales and mistakes! = Company Information = No liability for printing and typographical errors, changes, prior sales and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA Options: 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve 1 x Videojet BX 6500 1 x Graftech server TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Hfsdpfx Agoz A Dmhjtsl Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: ready for operation (used), Fanuc T15/8000 spindle motor A06B-0857-B928 # 3441 SN C03YK0711, professionally completely overhauled and tested with 12 months warranty, good condition, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfodpfxerlw Nvs Agtel

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Hfodpfxoz Ag Abj Agtsl Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters Hedpfszzn I Ajx Agtefl MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: used, mileage: 17,025 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 55,000 mm, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (at the following telephone number). MAN LE 8.150 4x2 fire engine 2,500-liter foam tank Cruise control, engine brake, ABS/ESP/ASR, auxiliary drive, halogen headlights, additional roof-mounted headlights, rotating beacons, air horns, Rockinger trailer coupling (40 mm), tire tread: 1st axle 12-13 mm, 2nd axle 12-15 mm Permissible total weight: 7,800 kg, unladen weight: 4,610 kg, payload: 3,190 kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Hodszhzt Ejpfx Agtjfl You can find more information on our website. ... Errors, changes, and prior sale reserved!!! ESP Cab: For local transport = Further information = Engine displacement: 4,580 cc GVW: 7,800 kg Please contact Tobias Ebert for further information.

Condition: ready for operation (used), functionality: fully functional, Danfoss VLT5008 – Type 175Z0070. 1 unit in stock. We have a large selection of Danfoss frequency converters available, including this type: VLT5008 (175Z0070). Hfsdpfx Agszu Ixzstel We have added an overview with photos to this advertisement. Additionally, you can request extra photos of a specific component. Feel free to send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Do you have any questions or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn Motor ID: 388 244-16 SN: 24918144D, professionally overhauled and tested with a 12-month warranty, 100% functional, scope of delivery as per photos, used, in good condition, 100% functional, scope of delivery as per photos, agreed sales discounts do not apply to this item. Please inquire separately for the price! Hfodpfxsv Tr Egj Agtjl

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Hfodpfxju T Uvie Agtsl

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Hjdpfx Agjzul N Rstefl Interface 0-20 mA