Used Compressed Air Diaphragm Pump Almatec for sale (30,629)

Condition: used, GENERAL Remarks: Manufacturer: Crane Hsdpfxoxqc Ddo Ahvoi Type: 251301 Location: Bremen Condition: used

Condition: excellent (used), - Standard dimensions - Completely in stainless steel - Connections NW 50, DIN 11851, KM - Diaphragms in PTFE / Santoprene - Capacity : max. 465 l/min. (see photo - flow chart) Dimensions : Hodpfx Ajtndgwshvoi - Length : approx. 400 mm - Width : approx. 280 mm - Height : approx. 550 mm - Pump overhauled - In very good condition

Condition: refurbished (used), Various Crane / Depa pumps, various designs and sizes, cpl. refurbished and available at short notice Hjdefcy A Ijpfx Ahvji

Condition: refurbished (used), Various Almatec pumps, plastic version, all sizes of the A series, some also E series, cpl. reconditioned, immediately available Hedpfx Aofcy Anehvoi

Condition: refurbished (used), Various Almatec pumps, plastic and stainless steel versions, all sizes of the AH series, cpl. refurbished and available at short notice Hedpfx Ahjfcy A Hovji

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of cooling: air, overall weight: 2,899 kg, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 6 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Hedpfexxkfljx Ahvji Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 18.60 m3/min Year of manufacture: 2011 Hjdpfjym Ub Uox Ahvji

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 2,200 mm, total height: 1,500 mm, overpressure (max.): 10 bar, rotational speed (max.): 4,860 rpm, machine/vehicle number: 28838, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! The system consists of a screw compressor and a refrigerated dryer. TECHNICAL DETAILS Hodoym Rwfjpfx Ahvoi Motor pressure: 22 bar Overpressure: 10 bar Speed: 4,860 rpm Volume flow: 3.02 m³/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 860 x 1,500 mm Weight: 400 kg External reference: Pieper - Lot 56

Condition: good (used), Year of construction: 1999, Refrigeration Dryer Manufacturer: KAESER Hjdpfsttwzbjx Ahvei Model: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser.

Condition: new, Year of construction: 2026, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available Hedpfebuqn Hjx Ahvji

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 53 kg, Caffini Libellula 1-3 Diaphragm Pump – NEW | Equivalent to Wacker Neuson PDI 3A & AMT 337G-96B | Delivery head 7 m | Flow rate 333 l/min | Discharge port 80 mm | Honda GX 160 petrol engine | Weight 53.5 kg | Solids handling up to 6 cm | Includes chassis & accessories Technical Data: Manufacturer: Caffini Model: Libellula 1-3 Condition: NEW Weight: 53.5 kg Delivery head: 7 m Flow rate: 333 l/min Discharge port: 80 mm Engine: Honda GX 160 petrol engine Engine power: 4.0 kW Solids handling: up to 6 cm Accessories: chassis, connection kit, strainer basket Highlights & Equipment: - Diaphragm pump for demanding applications – ideal for sludge, contaminated water & solids - Equivalent to Wacker Neuson PDI 3A & AMT 337G-96B – compatible & proven - Powerful Honda engine – reliable & low-maintenance - Flow rate up to 333 l/min – powerful & efficient - Chassis & accessories included – ready to use - Made by Caffini – professional-grade quality Applications: ✓ Construction & civil engineering ✓ Sewer & pipeline construction ✓ Agriculture & drainage ✓ Municipal use ✓ Flooding & emergency response Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Hodoynwbajpfx Ahvji Delivery: Nationwide & international shipping upon request Pricing: Ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Subject to prior sale and errors. Prices excl. VAT Further models available! ➡️ New & used machines, accessories & spare parts Buy Caffini diaphragm pump | Libellula 1-3 NEW | Equivalent to PDI 3A & AMT 337G-96B | Trash pump with Honda GX 160 | Caffini quality Your reliable partner for pump technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! On request, we are happy to offer a virtual machine inspection via video call.

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Hjdsfmim Uspfx Ahvsi Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Hsdpfxeh U Dtuj Ahvei Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) Hedpfxowypqre Ahvoi - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch Hodpoiyu Ifjfx Ahvji - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Pamasol 2089 Series Diaphragm Pump for suspensions Type 2089/1 Device was removed from a pharma plant in Cork, IE. Excellent condition. Hjdpfx Ajymyrrohvji

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Hsdsymmbtepfx Ahvei Year of manufacture: 2010 The dryer is fully operational.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Kaeser compressor system good conditon we moved to another warehouse in 2019 and didn't use the compressor in Hedpfsvzhgiox Ahvei

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Hodpfxjyif I Uo Ahvoi Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Hedpemt Dcxefx Ahvji Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Hsdpjmt Dcqefx Ahvji Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: good (used), Year of construction: 1999, Screw compressor Airtower 19, year of manufacture 1999, 10 bar, 11 kW, in good condition. Hsdpfeyhzf Hox Ahvsi

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 Hjdpfx Aeykvphshvji CAPACITY (m3/min): 45 PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC MODEL: SD1800 SERIAL NO.: 3414MA12150 YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): Hjdpfoykvmtsx Ahvei FREQUENCY INVERTER: BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2011, PROD. BRAND MODEL MDX6500 S/N CAI492661 Hsdpfxoykvk Ej Ahvji YEAR 2011 POWER (kW) 1.64 CAPACITY (m3/min) 6.5 PRESSURE (bar) 13 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER yes R404a 1.35kg