Used Communication Processor for sale (1,718)

Condition: used, SPS control, communications processor Simatic S7 Pedshz Rf Tjpfx Ahcera -Manufacturer: Siemens, Simatic S7 communication processor ovp -Type: 6ES7 340-1BH02-OAEO -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg

Condition: used, PLC control Pedpfxeb Nkuaj Ahcera -Type: CP343 6GK7343-1CX21-0XE0 -Communication processor CP343-1 for connecting Simatic S7-300 to Ind. Ethernet -Number: 15x available -Price: per package -Weight: 0.4 kg

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase Prodpfxszuy Inj Ahcsa

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! Pjdpfxjzt Si Us Ahcjra For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor Pedpfjzd Ufasx Ahcora – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: good (used), Year of construction: 2012, Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor, digital interface balancer -Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2 -Terminal modules: Type 9SHVM2510NL000 (2 pieces) -Dimensions: 300/275/H130 mm Prjdpfoi Sdfxsx Ahcja -Weight: 5.3 kg

Condition: like new (used), Like-new industrial PC for automation, visualization, and SCADA applications. Rugged rack-mount PC with redundant power supply and RAID system. Manufacturer: Siemens Type: Industrial PC Series: SIMATIC IPC647D Article number: 6AG4112-2JP41-0DX6 Condition: Like new Serial number: VPM5954764 Supply voltage: 110/230 V AC Power supplies: Redundant RAM: 16 GB DDR3 SDRAM Dual Channel Processor: Intel Core i5-4570TE Processor cores: 4 Mass storage: RAID1 Hard drives: 2 × 1 TB HDD Hot Swap Operating system: Windows 10 IoT Enterprise 2016 LTSB 64 Bit Communication: PROFINET Ethernet interfaces: 2 Ethernet LAN 1 MAC address: D4:F5:27:29:90:32 Ethernet LAN 2 MAC address: 20:87:56:F4:C5:7A Slots: 4 Slot 1: PCIe x16 Slot 2: PCIe x16 Slot 3: PCI Slot 4: PCI USB ports (front): USB 2.0, USB 3.0 Drives: Hot-swap bays (front) Pedpfx Ahezduwcecera Country of manufacture: Germany

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Pjdpozdnnusfx Ahcsra Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: ready for operation (used), Year of construction: 2020, total height: 1,529 mm, total width: 776 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, overall weight: 324 kg, number of axes: 3, This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details. • Last calibration: 06 September 2022 • X-axis travel: 400 mm • Y-axis travel: 400 mm • Z-axis travel: 200 mm • Resolution: 0.1 µm (0.0001 mm) • Length measurement accuracy XY: (2 + 3L/1000) µm • Length measurement accuracy Z: (3 + 5L/1000) µm • Length measurement accuracy E2XY: (2.5 + 4L/1000) µm • Machine depth: 1303 mm • CNC control: Yes • Control software: QVPak V13.3 • Operating system: Windows 10 64-bit • Measurement display: 3D graphical measurement display Predjyvqqfjpfx Ahcoa • Programming interface: EasyEditor • Edge detection: Advanced recognition algorithms • Camera type: High-resolution CMOS color camera • Communication: USB 3.0 • Zoom system: 7-step zoom lens • Measurement methods: Video measurement; Touch probe measurement; Multi-sensor measurement; Automatic measurement sequences • Measurement capability: Micro and nano feature measurement Additional equipment • Touch probe type: TP20 • Probe modules: 2 standard force modules • Probe module type: TP20 standard force • Stylus holder: 5-way holder • Stylus length: 13 mm • Stylus diameter: 10 mm • Probe changer: MCR20 • Probe changer capacity: 3 ports • Calibration ring: Ø20 mm • Reference sphere: Ceramic master ball Ø15 mm • Machine stand: QVST-4L • Power cable: CH type 1.8 m • Computer type: Dell Precision workstation • Processor: Intel Xeon W-2223 3.6 GHz • Monitors: 2× Dell UltraSharp U2421E • Additional software: QV Partner Manager V3.1 • Statistical software: MeasLink Real-Time Professional V9

Condition: good (used), PLC control, Siemens Simatic Net CP Profibus, communication processor, Ethernet switch, Industrial Ethernet -Manufacturer: Siemens, Simatic Net CP Industrial Ethernet -Type: 6GK7343-1EX11-0XE0 -Number: 1x Profibus available -Price: per piece -Dimensions: 120/80/H125 mm Prsdpfxjnbhl Ho Ahcoa -Weight: 0.5 kg/piece

Condition: ready for operation (used), Siemens 6GK1141-0AA00 communication processor, E-Stand 7, used, normal signs of wear, 100% functional Prjdpfoxagtzsx Ahcoa

Condition: new, Siemens 6ES7341-1CH02-0AE0 CP 341 communication processor, E-Stand: 2, SN: C-D6V08398, unused in opened original packaging, 100% functional, delivery scope as per photos. Psdpfxjx Euque Ahcera

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Pjdpfx Aszv Rc Sjhcera Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: new, Siemens 6ES5580-1UA11 Communication Processor CP 580, unused, 100% functional. Pedpfxei Edqcs Ahcora

Condition: new, AEG Modicon S 975 communication processor for 984, unused, 100% functional. Pjdpfsi D Tu Hox Ahcsra

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. Pjdpfx Ahjyv Nylecjra - Bi-metal saw band for solid and profile material.

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Pjdpfjw Rn S Usx Ahcsra

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles Podpszt Nlmsfx Ahcsra

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S5 Interface Module -Type: 6ES5 316-8MA12 -Number: 7 modules available -Price: per piece -Dimensions: 35/45/H140 mm Pjdpfxjh A Sbpe Ahcjra -Weight: 0.1 kg/pc.

Condition: used, mileage: 269,000 km, power: 120 kW (163.15 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,300 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, For sale is a well-maintained Mercedes-Benz Sprinter 316 MAXI refrigerated box van with the popular 2.1-liter diesel engine. The vehicle is in good condition! * New TÜV (technical inspection) and emissions test without any defects, valid until 02/2028 * German vehicle * Euro 6 emission standard * First owner * VAT can be shown separately Equipment: MAXI box van * Refrigerated box van / winter conversion * Fresh food cooling down to 0°C * Automatic transmission * Air conditioning * MBUX * Rear view camera * Apple CarPlay * Truck registration * 3 seats * Electric windows * Mirrors * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: 2700 KG * Payload: 800 KG * Towing capacity: 2000 KG Why we are the right choice? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices Pjdpfjzxay Sjx Ahcora * Transfer registration plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * if necessary, paint correction and Smart Repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: Exterior mirrors, electrically foldable, entry handle on the rear pillar on the right side, chassis: stabilization level I, rear door (opening angle 270 degrees), connection strip for electrical connections (driver's seat box), fuel filter with water separator, cable duct on the rear portal, cable duct on the side wall, front engine drive with bracket for additional coolant compressor, multimedia system MBUX (touchscreen 7"), hands-free system Bluetooth, steering wheel with multifunction buttons, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the driver's cab: double passenger seat, seats in the driver's cab: heated driver's seat, seats in the driver's cab: comfort driver's seat, step for the rear door, fleece battery 92 Ah, jack, sliding door assist on the right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the instrument panel on the passenger side, adaptive brake light, airbag for the driver, anti-slip regulation (ASR), display for windshield washer fluid level, exterior mirrors, electrically adjustable and heated, both sides, outside temperature display, roof lining in the driver's cab, automatic switching on of headlights, entry handle for the sliding door on the partition between the cab and the cargo area, electronic brake force distribution (EBV), body/superstructure: high-roof standard box body, child lock, communication module (LTE) for digital services, fuel tank: main tank 71 L, continuous cargo area partition, steering wheel (steering column mechanically adjustable), headlight range control, marker lig

Condition: used, mileage: 648,000 km, power: 290 kW (394.29 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We are very pleased that our offer has aroused your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our dealership! Prsdezxatxjpfx Ahcoa PRICE applies to the complete unit including the Schmitz tipper body (first registration: 11/2017), steel half-shell. 24 m³ steel tipper body Disc brakes Lift axle Roll tarp Platform Non-folding underride guard Special equipment: Audio system: CD radio (Bluetooth), Battery 220 Ah, CB radio, Air horns (2) on the cab roof, Storage compartment on the upper rear wall, Communication interface, Fuel tank: 390 L, aluminum, left, Alloy wheels 9.00x22.5 (ALCOA matte), Air intake behind the cab, Mounting plate / saddle plate 24 mm for fifth wheel coupling, Auxiliary drive MB 131-2c, Frame lowering without bellows residual pressure control, Tire pressure monitoring system, Fifth wheel coupling, low maintenance, Seats in the cab: Driver's seat, sprung seat, comfort, Sun visor, exterior, Voltage converter 24V / 12V 10 A, Splash guard, front, 12V socket, additional, 24V socket in the passenger footwell, additional, Door extension for the cab, Underride guard, front, Preparation / switch for lift axle on the semitrailer / trailer, Preparation for Fleetboard, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, ABS can be deactivated, Axle configuration: 4x2, Axle load front axle 7.5 t, Trailer socket 24V / 15-pin, Work lights, Arocs, Exhaust pipe to the center of the vehicle, Exterior mirrors, electrically adjustable and heated, Differential lock, rear axle, Compressed air connection in the cab, Compressed air tank, steel, Compressed air unit, medium, Cab: Width 2.30 m, Cab: Cab entrance, movable, Cab: Tilting mechanism, hydraulic, Cab: L StreamSpace, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Suspension: Front springs 7.5 t, 3 leaves, Window lifter, electric, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle, bevel gear 440, Info display 10.4 cm, Interior filter: Pollen filter, Body / structure: Tractor unit, Body variant: Standard, Lower bunk, Comfort locking system, Fenders, 3-piece, Steering pump, unregulated, Air intake from the front, Air compressor, 2-stage, Air dryer, heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Ramp mirrors, Waste heat recovery, Disc brakes with partial protection, Disc brakes, front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger seat, Front axle stabilizer, Socket, cab 24V, Tachograph / EG control device, Preparation for toll collection, Front axle, straight, Permissible total weight 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will gladly provide you with a LEASING, HIRE PURCHASE, or FINANCING OFFER. SERVICE TÜV / HU / UVV LBW / LGS inspection / Tachograph inspection / Installation of OBU device and service by our BRANDED WORKSHOP on site. TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our General Terms and Conditions. The information on the Internet is a non-binding description. It does not represent guaranteed characteristics. The seller is liabl

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Psdpfx Ahjzv U Ncjcsra Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 10 h, input voltage: 400 V, input frequency: 50 Hz, total width: 1,487 mm, total length: 4,440 mm, overall weight: 1,900 kg, Equipment: documentation/manual, For sale: a practically unused vertical double-spindle glass drilling machine Expoglass PRIAM, year of manufacture 2023. The machine has drilled just under 300 holes — condition as new, like factory-fresh. Fully designed and manufactured in Poland by Expoglass. This is the latest version of the machine — technically almost identical to a new unit (current price of a new machine: EUR 39,000 net). Included in the price of EUR 29,000 net: software update to the latest version inspection including calibration Pjdpfxezv Dunj Ahcjra optional installation at the buyer's site and operator training 6 months warranty on wear and mechanical parts Transport not included. The machine can be inspected on site at the current owner's premises. Advantages: automatic serial drilling of up to 20 holes very simple operation, minimal training time high machining precision — minimises glass cracking and chipping hole chamfering function modular design for fast servicing Technical data: Parameter Value Year of manufacture 2023 Holes drilled approx. 300 Length 4440 mm Height (operating) 2793 mm Height for transport 2100 mm Width 1487 mm Weight 1900 kg Communication 7" HMI panel + analogue buttons Spindle feed automatic, servo-stepper Feed control electronic Loading bar control electronic Spindle speed 700–2800 RPM Drill tip position measurement automatic Drill change with table lowering and spindle lock Spindle depth setting electronic (calculated by controller) Horizontal positioning double-row manual stop system Number of manual stops 6 pcs Material clamping pneumatic Hole chamfering function yes, electronically controlled Drill magazine capacity 70 drills Drill diameter measurement accuracy up to ±5 mm Glass thickness measurement accuracy up to 0.4 mm Loading bar positioning accuracy up to 0.7 mm Serial drilling yes, up to 20 holes Max. glass weight 200 kg (centred; max. 130 kg per half of the bar) Max. drilling height 1050 mm Recommended drills thin-wall "CHAMPION" L=75 mm Online remote support yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. - Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4 Pedpfx Ahozw H Efocora

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, MONTANA DIAMOND Crystal Glide Ski Servicing Robot – in excellent condition and ready for immediate use! For sale is a high-performance, fully automatic machine for professional winter sports servicing. This machine is specifically designed for workshops with high service volumes and, thanks to its 2 grinding stones, delivers first-class, fully automatic results. What makes this machine special: it has been meticulously maintained, cared for, and serviced by the owner himself throughout the years. It has been completely overhauled – many important core components, including the motors, have been recently replaced. Ready for immediate use – no backlog of maintenance required. The machine can be put into operation directly in your workshop. Pedjzv Sqdepfx Ahcsra The price includes 2 grinding stones, diamonds, and sensors (value of approximately €3,400). Please refer to the attached documentation for detailed technical information and specifications. Viewing is possible until the end of September. Pick-up only / transport must be arranged by the buyer. Sale to businesses, excluding any warranty. For sales to foreign countries: VAT invoice IGL (Intra-Community Supply).