Used Colour Pumps for sale (10,596)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Guedpfxjxg Izae Afijh Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Gsdpfx Afoxgt Tzeijuh Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Gusdpfx Afoxmgr Rsioh Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Gsdpfxjxnp Hae Afijuh Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Additional consideration: Gsdjv Ryb Rspfx Afisuh Sawdust extraction (A$20,000)

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Guedpfxjtrd T To Afieh Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP MODEL : CD300M Gedpfxjxiwawe Afieuh SERIAL : S071361/01 ENGING MODEL : CATERPILALR C9 ENGINE SERIAL NO : JSC22260 YEAR : 2011 HOUR : 7.8hrs

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Gsdpewq Ay Iefx Afijuh Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Guodpeu A Ut Nofx Afioh Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: used, Year of construction: 1996, functionality: fully functional, rotational speed (max.): 3,500 rpm, 2 identical decanters Type: D4LP30HB, nominal diameter: 430 mm, electric drive 37 kW, incl. ALLWEILER progressive cavity pump, incl. control cabinet Godpfexnzwkex Afiouh

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg Gedorm Nibjpfx Afieuh ADVANTAGES – German production – unpainted – very good condition – used chipper Original photos Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Net price: 8440 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: good (used), mileage: 153,950 km, power: 353 kW (479.95 HP), first registration: 06/2013, fuel type: diesel, color: white, axle configuration: 8x4, tire size: 385/65R22,5, fuel: diesel, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 16 m³, Year of construction: 2013, Equipment: air conditioning, cruise control, navigation system, parking heater, - Aluminum fuel tank - Brake booster Gsdpfxjxnyzhe Afisuh - Electric windows - Electronic Braking System (EBS) - High beam - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air horn - Fog lights - Beacon light - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) Scania G480, 8x4, Euro 6, Combo Sludge/Water Vehicle with Recycling System, with Stainless Steel Tank, Year 2013 More information: Engine: 480 HP Transmission: Opticruise (with clutch pedal) Suspension: Air-Air Mileage: 153,950 km Wheelbase: 3,900 mm Emission class: Euro 6 First registration: 13/06/2013 Electric windows and mirrors Air conditioning Reversing camera Navigation system Webasto (cab heater), engine preheater… Last technical inspection at 150,600 km (07/02/2025) Last service at 149,500 km The truck is in good and fully operational condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge extraction (stainless steel sludge tank 10,000 l), Wiedemann KW3000, speed: 1000, m3/h: 3000, vacuum: 400 bar (new vacuum pump, year 2020) High-pressure flushing system with stainless steel water tank 6,000 l, URACA, Webasto Thermo 300... operating hours: 2,128 hours Recycler with 4 cyclones Overall rating: General condition rating (1-5): 4.5 Condition of front tires: 90% (or new tires for an additional charge) Condition of rear tires: 90% (or new tires for an additional charge) Additionally: All documents for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * Wir sprechen Deutsch * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only to the purchase of this truck. * -----. ...

Condition: excellent (used), Year of construction: 1999, Ref:11017 . 1999 Polar 92 E Guillotine. 92cm guillotine Guodpsxnzqqefx Afish Equipped with: Frequency controlled drive motor Variable speed back gauge Microprocessor control Colour display with operator guidance graphics Variable pressure clamp for various stocks Air table with blower Steel side tables left & right 2 x HSS knives Knife changing device Rear Table Guard I.R. light barrier guard Including tools & manual. Specification: Cutting Width, Max: 92 cm Clamp Opening, Max: 11 cm Feed Depth, Max: 92 cm Power Required : 3kW

Condition: good (used), Hydraulic unit for bolt tensioning system, hydraulic screwdriver, hydraulic torque wrench, power screwdriver, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit: for clamping devices Guedpfx Afec Sml Noijh -max. pressure: 400 bar -Drive: 0.45 kW 1370 rpm -Equipment: foot switch, hydraulic filter, hydraulic tank -Dimensions: 380/320/H380 mm -Weight: 55 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Gjdpfer Hr Arsx Afisuh Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), functionality: fully functional, mileage: 38,503 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,535 kg, maximum load weight: 965 kg, first registration: 11/2020, next inspection (TÜV): 09/2026, emission class: euro6, color: silver, number of seats: 3, number of previous owners: 1, machine/vehicle number: SLS8400, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, tail-lift, truck registration, 229L Stuttgart 9775 Paint colour Iridium Silver MB 9775 A50 Front axle with increased load capacity AI1 Control code rear axle, crown gear 215 AR2 Axle ratio I = 3.923 BH6 Control code hydro aggregate variant 5 BK1 Control code wheel brake configuration 1 C6L Multifunction steering wheel C907 SERIES 907 TRANSPORTER VS30 CB8 Stabilisation Level II CL1 Steering wheel adjustable in tilt and height CW2 Omission of vehicle lowering D03 High roof D50 Continuous partition E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E1U USB socket 5 V E2I Auxiliary battery for retrofit consumers, interior E2N Control Pro-Features in NTG6 E36 Separation relay for additional battery E3J Pre-installation switch panel E3M MBUX multimedia system with 7-inch touchscreen F3F Passenger-optimized shift console F68 Heated and electrically adjustable exterior mirrors F907 SERIES 907 TRANSPORTER VS30 FKA Panel van FR8 Reversing camera GD8 6-speed manual transmission ECO Gear H20 All-round heat-insulating glass HH9 Semi-automatic climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Series C907/C910 Sprinter IE0 Series C907 VS30 RWD Gjdpew R Rxqsfx Afiouh IG4 Standard IL5 Left-hand drive IL6 Metallic paint IR4 Wheelbase 3665 mm (BM-forming code) IT4 3.5 tonner J10 Tachometer km/h J58 Belt warning system for driver's seat J65 Outside temperature display JA8 Crosswind Assist JG0 Gearshift indicator JH3 Communication module (LTE) for digital services JI7 Initial running distance maintenance interval 60,000 km K13 Main tank 71 litres KP6 Emission control SCR Generation 3 LA2 Headlamp assistant LB5 Third brake light LC2 LED light strip in load compartment M40 Alternator 14V/200A MI2 Engine OM651 DE 22 LA 105 kW (143 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MQ0 OBD (On-board diagnostics) Level D OH2 HU Freshup 2 PH1 Master code tail lift Bär Cargolift Q11 Longitudinal member reinforcement RH2 Tyres 235/65 R16 C RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Dual passenger seat SA5 Driver airbag SB1 Comfort driver's seat SK2 Seat occupancy detection driver's seat T16 Sliding door right T77 Grab handle, load compartment sliding door at partition T86 Grab handle on rear right corner pillar V42 Lashing rails side wall at belt rail V43 Wooden floor V85 Smoker package V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment to roof height (wood) VF7 Fabric Maturin black W54 Rear doors, twin-leaf, 270 degrees XG7 Without uprating/downrating 3500 kg XM1 Noise reduction XM4 Acoustic package XV1 Reference weight at least 2381 kg required YK4 Tie-down straps for lashing rails Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production Düsseldorf Z7K Fleet Comfort Package Z7L Fleet Load Compartment Package ZM0 Panel van

Condition: excellent (used), Catalogue number: 7502 TECHNICAL DATA DTBC-P feed trolley span between trolley wheels 750mm diameter of fed raw material 100-800mm total size of lateral shift 160mm log rotation left and right 360 degrees forward and reverse speed smooth hydraulic pump motor power 5.5kW DTCB auxiliary trolley span between trolley wheels 750mm range of lateral shift 160mm log rotation left and right 360 degrees side shift motor power 1.1kW feed trolley dimensions L/W/H 2850/1400/1500mm auxiliary trolley dimensions L/W/H 950/650/750mm total weight 1450kg ADVANTAGES – Polish production – solid construction – complete with cables, chains – used machine, very good condition, after general renovation (invoice available for inspection) PRODUCT FEATURES The auxiliary trolley is designed to support a log or a prism from the feed side of the sawmill in the diameter range from 100 mm to 750 mm. The feed trolley is designed to feed logs and prisms to sawmills in the diameter range from 100 mm to 750 mm. The device used for log manipulation, namely for securing the log in the tongs, transverse shifting, and log rotation is performed by hydraulic drives. Net price: PLN 59,900 Net price: EUR 14,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling the identification of the product. We only resell goods that the manufacturer has previously introduced to the market. We do not have any business relations with the manufacturer. Godsu R Nihjpfx Afieuh

Condition: excellent (used), Year of construction: 2005, Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Guedpfjxnytdsx Afioh Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system

Condition: excellent (used), Year of construction: 2017, operating hours: 22,259 h, functionality: fully functional, machine/vehicle number: 235958, clamping force: 2,200 kN, Equipment: documentation/manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update – Tax Notice and Advantage for Used Machines Starting from July 1, 2025, used machinery will also be eligible for a special depreciation allowance of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine (Keyword: “Growth Booster,” § 7 section 2 EstG-E). Manufacturer: Arburg Model: 570S 2200/400-170 2-K with rotary table Control system: Selogica Year of manufacture: 2017 Operating hours: 22,259 h Machine number: 235958 Special Features/Maintenance Condition: Regular maintenance by the manufacturer and previous owner Documentation: Included documents: Guodpfx Ajw Tt Erjfijh -- Original purchase invoice with additional items - Machine data sheet - Rotary table drawing Extras: - Hydraulic rotary table with 4 cooling circuits - 3 x core pulls - Hydraulic accumulator for rapid movement - Opening stroke increased to 450 mm / installation height adjustable from 250 to 450 mm - High wear-resistant screw and cylinder units - Servo-regulated screw - Injection pressure increased to 2,500 bar - 2x air blow-off - Hold pressure switching - 15 electrical heating zones each of 2 kW - 2x needle shut-off nozzle - Colour dosing interface - High-performance cooler Machine data sheet available upon request. - Complete documentation and software included - German language - First delivery in Germany Clamping unit: Clamping force: 2,200 kN / 220 t Tie bar distance: 570 x 570 mm Platen size h: 795 mm x 795 mm Min. installation height: 250 mm (can be increased to 450 mm) Max. daylight: 900 mm Opening stroke: 650 mm (currently 450 mm due to increased installation height) Ejector stroke: 250 mm Ejector force: 100 kN Movable platen centering D: 125 mm Mold weight: kg Injection unit 1 (400 series): Screw diameter: 40 mm Shot weight in polystyrene: 184 g/PS Shot volume: 201 ccm Injection pressure: 2,500 bar High-wear resistant Injection unit 2 (170 series): Screw diameter: 35 mm Shot weight in polystyrene: 77 g/PS Shot volume: 85 ccm Injection pressure: 2,500 bar High-wear resistant Motor: 45 kW Heating: 9.7 kW / 5 zones Weight: 9,800 kg Available immediately ex-stock Hannover/Germany or delivered free to destination against reimbursement of freight costs. The machine is offered function-tested. It is our sole property. The requested machine is available immediately ex our Hannover warehouse, is offered in function-tested condition and can be inspected under power. For your information regarding the machines we offer and our company: - We only sell our own machines acquired from active production, ex-stock Hannover. - All machines are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a broker trading in third-party assets. - All offered machines come from successful companies where maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Gjdpfjuv Hrdsx Afiouh Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Catalogue number: 7740 TECHNICAL DATA Dimensions of heating plates: 3000x1350mm Number of loads: 1 Shelf heated electrically Clearance: 340mm Number of cylinders: 6 Cylinder diameter: 80mm Total power: 20.7kW Pump motor: 1.1kW Dimensions (L/W/H): 3570x1600x2200mm Weight approx.: 3500kg Gusdpfxexbggqe Afioh ADVANTAGES – German manufacturing – Shelves heated electrically – Unpainted – Excellent condition – Used press Net price: 48,900 PLN Net price: 11,500 EUR depending on exchange rate 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2013, Type: F-222 Gujdpfsxnymwox Afioh Serial number: F222T1112200SA Year of construction: 2012 Pump capacity: up to 6200 kg/h Hopper: 300 litres Filling pressure: max 50 Bar Grinding head: WK132, 130 mm Power: 3 x 400V, 50Hz, 15.1kW Dimensions: 1300 x 1950 x 2050 mm Weight: 1020 kg For filling, portioning and grinding With lifter for 200L tote bins Frey minced meat portioner Type: C-Linie CLB CAN Serial number: CLB 126495 Year of construction: 2015 Capacity: max 75 portions/min Belt width: 290 mm Compressed air: 6 Bar Power: 230VAC, 50Hz, 0.5kW Dimensions: 2000 x 500 x 1500 mm Frey burger former Type: DMFB90 Serial number: DMFB90 123222 Year of construction: 2013 Capacity: max 150 portions/min Diameter: max 90 mm Belt width: 290 mm Compressed air: 6 Bar Power: 230VAC, 50Hz, 0.3kW Dimensions: 1850 x 800 x 1250 mm

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS Gusdoq Nmm Tepfx Afioh TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - max. turning length 1200mm - max. turning diameter 210mm - max. turning diameter with standard steady rest 90mm - max. size of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pieces installed) Gujdpfx Ajkqui Rsfieh - 4 types of spindle speeds - automatic or manual machine operation - 9kW headstock spindle motor - 3kW hydraulic pump motor - diameter of the exhaust port 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight approx. 3000kg ADVANTAGES - Italian production - automatic hydraulic copier - original DTR documentation - unpainted - used lathe, condition very good Net price: PLN 63,900 Net price: EUR 15,040 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. Gjdou A U Nkopfx Afijuh YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG