Used Cnc Woodworking Machine for sale (68,304)

Condition: good (used), Year of construction: 2004, Machine is good working condition. Iaedpfsyufn Iox Ahvsp Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Iodpfxeyudtps Ahvoap Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Iodsyucc Nspfx Ahvoap Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Iajdjyub Udepfx Ahvep Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), controller manufacturer: Siemens 840DSL, total height: 3,325 mm, total length: 5,520 mm, total width: 3,320 mm, empty load weight: 10,000 kg, nominal power: 50 kW (67.98 HP), 5-assig simultaan bewerkingscentrum Type: K3X8F max. werkstuk: dia 700 mm max. werkstukgewicht: 300 kg afstand spilneus / boventafel: 525 mm A-as (kanteling): +30°/-180° C-as (rotatie): 360° continu snelle bewegingen: 50.000 mm/min hoge druk koeling door spindel spaantransportband trillingsbewaking lasertoolsonde Blum Micro Iaedsyt S Ufepfx Ahvep werkstuktaster Blum TC52 met Fanuc Robot laadsysteem RB: Robot: A05B-1330-B205 (Fanuc Robot R-1000iA/100F) Controller: A05B-2601-B112 (Fanuc-systeem R-30iB) Max longitudinal travel X-axe: 780 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 500 mm Admission in millinghead: HSK 63A Spindlespeeds: 16 000 rpm Table size: dia 500 mm Toolholder: yes Number of tools: 36 toolpositions

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain TNC 530, empty load weight: 23,500 kg, FBF-S 6000 4-assige gelijktijdige X/Y/Z + draaitafel hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) dia 1000 mm CNC universele freeskop, indexering elke 2 x 2,5° Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 40 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Alle documentatie, CE-certificaat, parameters etc. slechts +- 500 werkuren vanwege een faillissement vanwege een verloren contract van de Franse nationale spoorwegen Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Iedpfoyt S Ursx Ahvjap Max speedrange: 40 > 4000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm Isdpjytyqzefx Ahvoap spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 900 mm Travel Z-axe (Height): 1600 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Iaodpfx Asytyqushvsp Max speedrange: 20 > 3000 rpm

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. Iodpfxoytrgze Ahvsap The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Year of construction: 2008, condition: ready for operation (used), A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026. Iedpoyu T D Rsfx Ahvoap

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Iodoytq R Espfx Ahvoap Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Isdpfx Ahoytqmmsveap Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filtration unit, outdoor installation 1 x nesting software integrated in machine control Availability: immediate

Condition: ready for operation (used), The machine is ready for operation. Please refer to the video: The machine can be dismantled, loaded, and transported to your location for an additional charge. Basic Specifications Travel paths: X 710 / Y 520 / Z 520 mm Weight: approx. 5,500 kg Tool holder: SK40 or HSK-E50 Tool magazine: 24 positions (optionally 60) Spindle Standard: 12,000 rpm Option: 30,000 rpm Power: 10–15 kW (standard) / 15–20 kW (option) Axes & Feed Rapid traverse: 30 m/min Feed rate: up to 10,000 mm/min Resolution: 0.001 mm Positioning accuracy: 0.010 mm Tool Data Max. tool length: 315 mm (SK) Max. tool weight: 6 kg Magazine total weight: 80 kg (optionally 180 kg) Ijdpfxjyu Tlzs Ahvjap If you have further questions, please feel free to send a message here, or contact us via WhatsApp or phone. The price is net, no warranty or returns, liability for defects is excluded, subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2018, Technical specifications: Manufacturer: RAMBAUDI/JOBS Model: SARA Year of manufacture: 2018 Control: HEIDENHAIN itnc640 Dimensions: 12,600 x 6,830 x 5,045 mm Table: 5,000 x 2,500 mm Iaedpfev Rfwkox Ahvep Maximum load capacity: 15 tons The machine is equipped with a universal milling head with two tilting planes (C and A). The rotation of the tool in the universal milling head as well as the swivel movements of the C and A planes are controlled by a drive spindle: - Speed: 5,000 rpm - Power: 25 kW (S1) / 33 kW (S6 60%) - Torque: 482 Nm (S1) / 637 Nm (S6 60%) - Tool holder: ISO50 DIN69871 collet Main axes: - X-axis: Longitudinal movement of the work table - Y-axis: Transverse movement of the RAM slide - Z-axis: Vertical movement of the RAM - Swivel axis 1 (C plane): Rotation of the milling unit around the vertical axis of the RAM. - Swivel axis 2 (A plane): Rotation of the milling unit around a plane offset by 45° from the C plane. Automatic Tool Changer (ATC): - 24-position chain magazine (ISO 50) - Tool change arm between spindle housing and magazine Additional Equipment: - RENISHAW NC4 laser AXIS SPEEDS | Axis | Travel | Speed | |-----|-----|----- | | X-axis (optical measuring system) | 5,200 mm | 12 m/min | | Y-axis (optical measuring system) | 3,000 mm | 12 m/min | | Z-axis (optical measuring system) | 900 mm | 12 m/min | *(Note: Optical measuring systems ensure precise position detection for the X, Y, and Z axes.)*

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre Iedpfx Aeytc Nmehvsap CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Empty weight: 6.600 kg Price: On request - Details: - └ Description: Machine currently not working: Problem in the canbus system - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes Iaodpfx Ahsytcl Ijvep - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table length: 3,500 mm, table width: 820 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 35 rpm, table load: 2,500 kg, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Iaedpoytb Tqjfx Ahvsp Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Iedsytb Syjpfx Ahvjap Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2016, A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible. Iedpfx Aeyuyv Hohvsap

Condition: ready for operation (used), Year of construction: 2016, A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible. Iodpfx Ahjyuyv Tsvsap

Condition: ready for operation (used), Year of construction: 2002, Immediately available from facility closure: CNC Horizontal Machining Center MAZAK Iaedpfx Asyuwm Ajhvep Type FH 5800 The machine is sold with all tools, pallets, and tool magazines. CNC control Mazatrol PC Fusion CNC 640 M Travel paths X/Y/Z: 710/610/660 mm Table indexing: 360 x 1 degree Pallets: 6 units Pallet size: 400 x 400 mm Spindle: SK 40 Tool magazine: 120 positions Spindle speed: 35 – 15,000 rpm Knoll high-pressure cooling system Chip conveyor Weight: 15 tons Offered at a price of EUR 18,000 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm Isdpeyuwmpsfx Ahveap SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC vertical machining center Hedelius Type BC 40 D/20 Year of manufacture: 1997 Control: Siemens Sinumerik 840 D 4th axis Table: 2 x 1100 x 420 mm Pendulum machining possible Table load: 500 kg Travel (X/Y/Z): 1700/400/400 mm Iasdoyuwlfspfx Ahvsp SK 40 Magazine for 20 tools Spindle speeds: 30 – 6000 rpm Rapid traverse in all axes: 30 m/min Drive power: 20 kW Weight: 7 t Price: EUR 12,500.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex stock: CNC bed-type milling machine Wagner Model WBE 1300 R Year of manufacture 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z 1300/500/570 mm SK 40 Automatic tool clamping Drive 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Machine vice Various tool holders Weight 4 t Iasdpfxsyuwhte Ahvjp Priced at EUR 6,750.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: CNC bed-type milling machine MTE Iasdpoyuwhmjfx Ahvep Type: Kompakt Plus Year of manufacture: 2000 Heidenhain TNC 410 Table: 2200 x 750 mm Travel X/Y/Z: 2000/800/800 mm Table load capacity: 4 tons Spindle taper: SK 50 Hydraulic tool clamping Spindle speeds: 40 – 2500 rpm Spindle power: 15 kW Total power requirement: 30 kW Coolant system Weight: 12 tons Offered at a price of EUR 14,500 plus VAT, ex location